Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Off-Topic Thread

1368369371373374389

Comments

  • Registered Users, Registered Users 2 Posts: 55,657 ✭✭✭✭Headshot




  • Registered Users, Registered Users 2 Posts: 7,181 ✭✭✭Serephucus


    There's also the 34UM65. It's a 2560x1080 version, for ~€590. Might look into that one...


  • Registered Users, Registered Users 2 Posts: 7,182 ✭✭✭Genghiz Cohen


    Sick of our wireless router dropping devices.
    If I said I'd spend around €150 on a good router for the house, what would you say to me?


  • Registered Users, Registered Users 2 Posts: 712 ✭✭✭deejer


    Sick of our wireless router dropping devices.
    If I said I'd spend around €150 on a good router for the house, what would you say to me?

    Id say Id like to do the same thing myself.


  • Registered Users, Registered Users 2 Posts: 7,181 ✭✭✭Serephucus


    I'd actually like an answer to this one as well. Been looking at this one myself, but I don't know how much of a difference it'll actually make. Have a supposedly pretty decent N one at the minute.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 712 ✭✭✭deejer


    Serephucus wrote: »
    I'd actually like an answer to this one as well. Been looking at this one myself, but I don't know how much of a difference it'll actually make. Have a supposedly pretty decent N one at the minute.

    What do you have at the moment?


  • Registered Users, Registered Users 2 Posts: 7,181 ✭✭✭Serephucus




  • Registered Users, Registered Users 2 Posts: 1,748 ✭✭✭rolexeagle1


    I have the new one UPC have been sending out, its a Thompson one, and I must say its doing its job very well. Gets me 30m down while up in the attic on my HTC one. Wired to the PC I have seen 90+


  • Registered Users, Registered Users 2 Posts: 5,615 ✭✭✭Revoker88


    I put off my 21:9 monitor purchase, because 4k showed its ugly face. Now I know for sure, I did not made mistake. This ( or other brand same resolution ) monitor is going to be my next upgrade. Its just perfect for me. Specially when I do play racing games with G27.

    Dont forget though that that res needs 35% more grunt than 1440p,therefore you would most likely need to look at crossfire/sli,just like you would for 4k so i doubt you be saving much by going for that res.

    As you put it you would need an "ePenis" rig to run it also:p


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 22,924 ✭✭✭✭ShadowHearth


    EoinHef wrote: »
    Dont forget though that that res needs 35% more grunt than 1440p,therefore you would most likely need to look at crossfire/sli,just like you would for 4k so i doubt you be saving much by going for that res.

    As you put it you would need an "ePenis" rig to run it also:p

    Its still less then you need to run 4k, but you get more of benefit, then just 4k. 4k detail level is more of an issue right now, then advantage due to scaling. in that monitor you get more pixels to be actually benefitial.


  • Registered Users, Registered Users 2 Posts: 5,615 ✭✭✭Revoker88


    Its still less then you need to run 4k, but you get more of benefit, then just 4k. 4k detail level is more of an issue right now, then advantage due to scaling. in that monitor you get more pixels to be actually benefitial.

    The pixel density is only about the same as a 27" 1440p monitor though so im not sure it would look much better than that,the same image quality just larger 34" panel. Nice middle ground though i suppose


  • Registered Users, Registered Users 2 Posts: 22,924 ✭✭✭✭ShadowHearth


    EoinHef wrote: »
    The pixel density is only about the same as a 27" 1440p monitor though so im not sure it would look much better than that,the same image quality just larger 34" panel. Nice middle ground though i suppose

    well, thats what I mean, Pixel density is not as good as 4k, but at that stage I dont really care about it. I would prefer lower pixel density, but more use of the actual pixels. Thats what these 21x9 ratio panels do. Whats the point having all those 4k pixels jammed in to 30 inch monitor if you get more drawbacks from it then benefits.


  • Registered Users, Registered Users 2 Posts: 4,979 ✭✭✭Tea_Bag


    Sick of our wireless router dropping devices.
    If I said I'd spend around €150 on a good router for the house, what would you say to me?
    I can help ye out here.

    get a Mikrotik RB2011UAS-2HnD-IN.

    Irish sellers too:

    here cheaper?

    where i got mine - shipped from Czech Rep?

    can be bought in a Rack mount chassis if you prefer.

    here is a thread by PogMoThoin detailing what you need to do to set up one of these bad boys.

    its not for the faint of heart, because you literally write your own firewall, write your own nat, QOS etc
    but the beauty is that there really is no limit to what you can do. its essentially a 600mhz (OCable to 750 :P) CPU running RouterOS on linux, with a 1000mW wireless chip. you can run scripts straight from a terminal in real time. its apparently comparable to €600 Cisco enterprise gear.

    http://forum.mikrotik.com

    did i mention it has an LCD touchscreen? plus, look at it! :cool::cool:

    MikroTik_RB2011-UAS-2HND-IN.jpg


  • Registered Users, Registered Users 2 Posts: 7,845 ✭✭✭Calibos


    I can barely get my head around my Asus RT-N66 routers GUI never mind writing firewall rules in command line or something. Cool, powerful and cheap, if you've got the saavy for it though, that mikrotik.

    There's a lot to be said for a powerful router what with all the connected devices in the home these days and potentially several users in the home connecting to hundreds of peers each at the same time :D

    Our household of 7 adults with all the desktops, laptops, tablets, smartphones and streaming XBMC media players brings our total concurrently connected devices to about 20 a lot of the time.

    When we were just using the supplied UPC Cisco EPC3925 modem/ router we got disconnects every day, averaged 60-70mbit with rare 85mbit max throughput and torrents would bring the home network to its knees as the 3925 just couldn't handle the concurrent load and overheats. The day I purchased the ASUS and bridged my 3925 turning it into a mere modem was the last day I ever had a disconnect and the last day I didn't max out my UPC package speed. Get 123/10mbit 24/7/365 now and for the last 18 months.


  • Registered Users, Registered Users 2 Posts: 2,325 ✭✭✭deceit


    Calibos wrote: »
    I can barely get my head around my Asus RT-N66 routers GUI never mind writing firewall rules in command line or something. Cool, powerful and cheap, if you've got the saavy for it though, that mikrotik.

    There's a lot to be said for a powerful router what with all the connected devices in the home these days and potentially several users in the home connecting to hundreds of peers each at the same time :D

    Our household of 7 adults with all the desktops, laptops, tablets, smartphones and streaming XBMC media players brings our total concurrently connected devices to about 20 a lot of the time.

    When we were just using the supplied UPC Cisco EPC3925 modem/ router we got disconnects every day, averaged 60-70mbit with rare 85mbit max throughput and torrents would bring the home network to its knees as the 3925 just couldn't handle the concurrent load and overheats. The day I purchased the ASUS and bridged my 3925 turning it into a mere modem was the last day I ever had a disconnect and the last day I didn't max out my UPC package speed. Get 123/10mbit 24/7/365 now and for the last 18 months.
    I'm going to have to test this out and get a decent router as I've about 40 devices connecting to my 3925. Mostly connecting over lan but the modem is always really hot touch and forever dropping out.
    Come to think of it, the issues started happening when I removed my watchguard firewall and was too lazy to put it back in place. I will place something in between over the weekend to lessen the packets its receiving to see if it stops dropping out.


  • Registered Users, Registered Users 2 Posts: 878 ✭✭✭Luck100


    Two things which greatly improved my networking performance:

    1. Bridge the UPC box and add your own wifi router. I only have a cheap N router from 3 years ago and it still blows away the UPC wifi.

    2. Put all torrents on one machine which has ethernet (not wifi) straight into the router. In my case a cheap laptop dedicated for torrents. Then all the remaining wifi devices in the house run smooth. I get the impression that torrent traffic stresses the wifi much more than an equal bandwidth of streaming or simple downloads.

    After those two steps I never have disconnects anymore. I might reboot router once every few months as it can very rarely get frozen, but that's strictly it.


  • Registered Users, Registered Users 2 Posts: 7,845 ✭✭✭Calibos


    Forgot to mention that I introduced a fan to my router setup the same day I introduced the new Asus. I'd already noticed like Deceit that the plastic casing on the 3925 got incredibly hot which is all the more surprising given that plastic is not a good conductor of heat.

    I also thought I saw a pattern in a lot of complaints about UPC. Lots of complaints in the Summer and Winter months. Much fewer complaints Spring and Autumn. I wondered could that be because of high internal/external ambient temperatures in the Summer and high internal ambient temps because of central heating in the Winter causing the 3925 to breach its reliable operating temperature. Whereas in the Spring and Autumn one would have lower ambients and no CH or CH with the thermostat set lower.

    I simply cut the last inch or two off a spare USB cable (who doesn't have 10 or 20 spare USB cables in some drawer these days :D ) and cut the fan connection of a cheap spare 120mm case fan. Wired them together and plugged into the 3925's USB port on the back. Instant always on 5v silent router fan. Have it sandwiched between the stacked 3925 and Asus with a large pair of rubber bands holding the sandwich together. :D


  • Closed Accounts Posts: 1,467 ✭✭✭McSasquatch


    Hate the Cisco UPC unit I have - always hot, Wi-Fi is rubbish, and occasionally even the ethernet connections crap out (accompanied by really high pitched capacitor whine).

    Networking is something I have no clue on, so must read up on potential replacement routers and how to bridge it to the Cisco box.


  • Closed Accounts Posts: 604 ✭✭✭Vandango


    I am trying to return a defective motherboard to Hardewareversand.de? They mention in their T&Cs, about printing out one of their return stickers which has their return address on it when you are returning an item.

    Problem is, this sticker cannot be found on their site and 3 email later, I'm still waiting for them to email it to me so I can print it out and return the motherboard to them. Does anyone here know what the return address actually is for returning defective items?


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 626 ✭✭✭Seaaan


    Vandango wrote: »
    I am trying to return a defective motherboard to Hardewareversand.de? They mention in their T&Cs, about printing out one of their return stickers which has their return address on it when you are returning an item.

    Problem is, this sticker cannot be found on their site and 3 email later, I'm still waiting for them to email it to me so I can print it out and return the motherboard to them. Does anyone here know what the return address actually is for returning defective items?

    Did you go to complaint and then through those pages and then it brings you to an option to return/replace/swap


  • Registered Users, Registered Users 2 Posts: 7,182 ✭✭✭Genghiz Cohen


    Vandango wrote: »
    I am trying to return a defective motherboard to Hardewareversand.de? They mention in their T&Cs, about printing out one of their return stickers which has their return address on it when you are returning an item.

    Problem is, this sticker cannot be found on their site and 3 email later, I'm still waiting for them to email it to me so I can print it out and return the motherboard to them. Does anyone here know what the return address actually is for returning defective items?

    I was going to RMA my PSU to here:
    Just in Time Logistics
    c/o hardwareversand.de GmbH
    Daimlerweg 2

    59519 Möhnesee
    Germany

    Then I found out the postage was 50% of the price of the thing. Called it quits and bought a new one.

    Within 6 months, if the item is found defective, VerSand will refund you the cost of the return postage. Or so the man told me.


  • Closed Accounts Posts: 604 ✭✭✭Vandango


    Seaaan wrote: »
    Did you go to complaint and then through those pages and then it brings you to an option to return/replace/swap

    Yes I went right to the very end and all I got was an image display of my complaint with my summary ect. Nowhere did it give me an option to print out the Return Shipment Sticker they spoke about. This is supposed to have their return address on it.

    So because I don't have it and I don't have their return address, I'm sitting here in limbo and can't return the motherbaord. Oh and I even repeated the complaint process twice to make sure I didn't miss a print label option or anything like that.


  • Closed Accounts Posts: 604 ✭✭✭Vandango


    I was going to RMA my PSU to here:



    Then I found out the postage was 50% of the price of the thing. Called it quits and bought a new one.

    Within 6 months, if the item is found defective, VerSand will refund you the cost of the return postage. Or so the man told me.

    My motherboard is 14 days old, so I don't expect them to charge me 40% of it's price for postage. Surely that would be illegal and against European consumer law?

    How old was your PSU btw?


  • Registered Users, Registered Users 2 Posts: 16,930 ✭✭✭✭challengemaster


    Parts fairy came...

    zgFbRe1.jpg


  • Registered Users, Registered Users 2 Posts: 7,182 ✭✭✭Genghiz Cohen


    Vandango wrote: »
    My motherboard is 14 days old, so I don't expect them to charge me 40% of it's price for postage. Surely that would be illegal and against European consumer law?

    How old was your PSU btw?

    It was An Post that wanted the money.
    My PSU developed a fault after a year and a half, I didn't get around to returning it until after the 2 year window so between the initial cost and the risk I wouldn't get it refunded and that they would just say no, I didn't bother.


  • Closed Accounts Posts: 604 ✭✭✭Vandango


    It was An Post that wanted the money.
    My PSU developed a fault after a year and a half, I didn't get around to returning it until after the 2 year window so between the initial cost and the risk I wouldn't get it refunded and that they would just say no, I didn't bother.

    So since my MB is only 14 days old, I assume I should have no problem with them covering postage ect? The motherboard cost me €254, so 40% of that is €101 .

    Btw, I told them I'm looking for a like for like replacement and not a refund on my purchase.

    Why did An Post charge you so much btw? And could I not just send it by normal express parcel delivery?

    Sorry for all the questions.


  • Registered Users, Registered Users 2 Posts: 626 ✭✭✭Seaaan


    Vandango wrote: »
    So since my MB is only 14 days old, I assume I should have no problem with them covering postage ect? The motherboard cost me €254, so 40% of that is €101 .

    Btw, I told them I'm looking for a like for like replacement and not a refund on my purchase.

    Why did An Post charge you so much btw? And could I not just send it by normal express parcel delivery?

    Sorry for all the questions.

    I just did one and got the option to print a label. Are you sure you did it correctly?


  • Registered Users, Registered Users 2 Posts: 626 ✭✭✭Seaaan


    3461700007.png


    My net got *slightly* faster. Woohoo.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 7,182 ✭✭✭Genghiz Cohen


    Vandango wrote: »
    So since my MB is only 14 days old, I assume I should have no problem with them covering postage ect? The motherboard cost me €254, so 40% of that is €101 .

    Btw, I told them I'm looking for a like for like replacement and not a refund on my purchase.

    Why did An Post charge you so much btw? And could I not just send it by normal express parcel delivery?

    Sorry for all the questions.

    Ah, I see.
    You should be fine.
    I used 40% as a relative number, not that everyone is charged 40%.
    PSU's are heavy and mine cost around €100 new. An Post wanted €40 to ship it to Germany. I had a look around and that was a good price.
    Your motherboard will be lighter and should cost less.

    You will probably have to pay for the shipping yourself and VerSand will refund you later once they confirm the Mobo is faulty.


This discussion has been closed.
Advertisement