Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Domestic Solar PV Quotes 2020

17677798182164

Comments

  • Registered Users, Registered Users 2 Posts: 261 ✭✭caycro


    https://www.bsl-battery.com/powerwalls.html This crowd doing 10kW powerwall for €1770 + €250 shipping.

    Anyone use them?

    Did you get a quote directly from them or through a supplier? Thanks


  • Moderators, Home & Garden Moderators Posts: 7,013 Mod ✭✭✭✭graememk


    sebdavis wrote: »

    to work out the kwh, its Nominal Voltage[3.2] x Capacity [200] x Number of cells [8] = 5.12kWh

    Normally you need 15 or 16 cells for a 48V system that most inverters run on.

    What sort of setup do you currently have?


  • Registered Users, Registered Users 2 Posts: 6,441 ✭✭✭championc


    sebdavis wrote: »

    If you searched with the word CALB, you cannot have got the link you gave here.

    Here is the link and the proper cells

    € 1.389,00 30%OFF | NEW 16PCS CALB 3.2v 200Ah LiFePO4 Rechargeable Battery brand new 200AH 24V 48V 200AH Lithium iron Phosphate Packs Solar Battery
    https://a.aliexpress.com/_mtLHTeb


  • Registered Users, Registered Users 2 Posts: 542 ✭✭✭gomamochi1


    championc wrote: »
    Search for "CALB 200A LiFePO4"

    They have, by far, the sturdiest connectors and bolt sizes, in addition to good strong cases

    Is it possible to mix a 5kw pylontech system with these 10kw aliexpress batteries or do I need an independent bms for the ali batteries prior to the hybrid inverter? Thanks


  • Moderators, Home & Garden Moderators Posts: 7,013 Mod ✭✭✭✭graememk


    gomamochi1 wrote: »
    Is it possible to mix a 5kw pylontech system with these 10kw aliexpress batteries or do I need an independent bms for the ali batteries prior to the hybrid inverter? Thanks

    Don't think it's possible to mix batteries.


  • Advertisement
  • Closed Accounts Posts: 891 ✭✭✭sebdavis


    graememk wrote: »
    to work out the kwh, its Nominal Voltage[3.2] x Capacity [200] x Number of cells [8] = 5.12kWh

    Normally you need 15 or 16 cells for a 48V system that most inverters run on.

    What sort of setup do you currently have?

    I have the max panels and a 2kWh battery hooked up to it. Off one of the main suppliers with the equipment coming from GivEnergy


  • Registered Users, Registered Users 2 Posts: 6,441 ✭✭✭championc


    gomamochi1 wrote: »
    Is it possible to mix a 5kw pylontech system with these 10kw aliexpress batteries or do I need an independent bms for the ali batteries prior to the hybrid inverter? Thanks

    Theoritically you could although you must remember that Pylontech use a 15s setup in their batteries, so you would only need 15 AliExpress cells and a 15s BMS

    HOWEVER, while the inverters will "talk" directly to the Pylontech BMS, they can't "talk" to the AliExpress cells, But the two sets in parallel may work once you then set the Pylontechs to have a capacity of about 15kW. The power should equally be drawn off both sets and in the same way, charge both sets.

    So the important part is that all cells must be of the same battery chemistry and the same number of cells per string.


  • Moderators, Home & Garden Moderators Posts: 7,013 Mod ✭✭✭✭graememk


    sebdavis wrote: »
    I have the max panels and a 2kWh battery hooked up to it. Off one of the main suppliers with the equipment coming from GivEnergy

    Time to get the manual out for what the batteries are connected to.

    You need full manual control of the system, ie max charge voltage, minimum voltage, charging/discharging current to name a few.


  • Closed Accounts Posts: 891 ✭✭✭sebdavis


    graememk wrote: »
    Time to get the manual out for what the batteries are connected to.

    You need full manual control of the system, ie max charge voltage, minimum voltage, charging/discharging current to name a few.

    GIV-BAT-ECO-2.6

    https://midsummerwholesale.co.uk/pdfs/giv-battery-eco-datasheet.pdf

    I have the 5kWh invertor Giv-HY5.0


  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    championc wrote: »
    HOWEVER, while the inverters will "talk" directly to the Pylontech BMS, they can't "talk" to the AliExpress cells.

    That was my next question, presumably connecting any unsupported batteries, whether DIY EV cells, or cheap import Chinese cells, wouldn't be supported by the inverter companies and therefore would technically invalidate the warranty?


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 374 ✭✭samdeluxjones


    caycro wrote: »
    Did you get a quote directly from them or through a supplier? Thanks

    Direct.

    When you inquire about a battery they ask for you number then a sales dolly bird sends you all the info on whatsapp.


  • Moderators, Home & Garden Moderators Posts: 7,013 Mod ✭✭✭✭graememk


    DrPhilG wrote: »
    That was my next question, presumably connecting any unsupported batteries, whether DIY EV cells, or cheap import Chinese cells, wouldn't be supported by the inverter companies and therefore would technically invalidate the warranty?


    No different to lead acid, as long as you operate within specifications it's fine.

    You'd be far more likely to hurt the batteries than the inverter, if you put incorrect settings in.


  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    graememk wrote: »
    No different to lead acid, as long as you operate within specifications it's fine.

    You'd be far more likely to hurt the batteries than the inverter, if you put incorrect settings in.

    Oh yeah I'm not worried about cooking the inverter, just pointing out that your warranty would be void as soon as you hook them up.

    So if the inverter did go wonky a year down the line for something unrelated, they would probably try and wriggle out of it because your warranty is dead.


  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    Ps I figured that this question is a bit off topic for the general solar PV quotes thread so I started a thread specific to the large scale battery expansion.

    Come join in!

    https://touch.boards.ie/thread/2058165926/1/#post116485917


  • Registered Users, Registered Users 2 Posts: 374 ✭✭samdeluxjones


    https://www.bsl-battery.com/powerwalls.html This crowd doing 10kW powerwall for €1770 + €250 shipping.

    Orders of 10 or more and they will pay for shipping.


  • Registered Users, Registered Users 2 Posts: 6,441 ✭✭✭championc


    DrPhilG wrote: »
    That was my next question, presumably connecting any unsupported batteries, whether DIY EV cells, or cheap import Chinese cells, wouldn't be supported by the inverter companies and therefore would technically invalidate the warranty?

    The inverters are not sold as only supporting particular battery modules, but they are sold to be connected to batteries. In general, you can see that inverter manufacturers will sell inverters with profiles for linking specifically to certain types of known battery modules.

    However, they also supply the "Default" option which allows you to attach your own build (once it's around the 48v mark). So this can be made up of

    4 x 12v Lead Acids
    8 x 6v Lead Acids

    14 x 3.7v Li-ion Cells

    7 x 7.6v Leaf Modules

    15 x 3.2v LiFePO4 Cells
    or
    16 x 3.2v LiFePO4 Cells

    So you cannot invalidate the warranty. You are using them for the purpose it was intended and since it is not packaged with any particular store, then it's perfectly OK. If you bought the likes of a GivEnergy Inverter, then maybe this is particularly destigned to be used with only a GivEnergy Battery Pack. However, even with going with a 3rd party solution with this, you are more likely to be in an "unsupported" situation rather than any warranty issue

    Actually, these inverters are very clever really, and will more likely just shut down if they sense any over or under voltage.

    Of course, you will invalidate the warranty if you open the unit up !!!


  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    championc wrote: »
    So you cannot invalidate the warranty.

    Lol, Solis tech support told me that using "unsupported" batteries would invalidate the warranty. I did email back to ask for clarification on what counted as unsupported.

    Ps I started another thread around the subject of big battery expansion. Your expertise would be more than welcome!


  • Registered Users, Registered Users 2 Posts: 1,469 ✭✭✭MAULBROOK


    Lads is this battery topic not better suited to trouble shooting page
    https://www.boards.ie/vbulletin/showthread.php?t=2058101518


  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    MAULBROOK wrote: »
    Lads is this battery topic not better suited to trouble shooting page
    https://www.boards.ie/vbulletin/showthread.php?t=2058101518

    I'd say its more suited to the battery thread!

    https://touch.boards.ie/thread/2058165926/1/#post116491473


  • Registered Users, Registered Users 2 Posts: 1,469 ✭✭✭MAULBROOK


    DrPhilG wrote: »
    I'd say its more suited to the battery thread!

    https://touch.boards.ie/thread/2058165926/1/#post116491473

    Man you have your fingers in many pies, nice one :P:P:P


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 114 ✭✭Tuttlinghorn


    Hi Folks,
    If anyone has the patience I'd appreciate any advice - not just to compare pricing but more to know what spec I should go for, so I can balance vs proposals I'll get from installers.

    Detached house with plenty of south facing roof space. 2 adults and 2 young teens. Mix of underfloor heating and radiators. Oil fired central heating. House very well insulated following big refurb couple of years back.

    Currently have a PHEV and expect to go full EV with next car. Low enough mileage on average.
    annual Electric consumption = 7,700 KWH

    Quoted EUR 10,000 including vat and after allowing for the grant for Supply and install as below, though this is before any site survey (Lockdown)

    4.48 kwp system = 14 x 320w amerisolar panels. 20 Yr warranty
    Solis Hybrid inverter (pay 96 quid to extend warranty from 5 to 10 yrs). Unclear if I'd get 3 or 5k model)
    2.4 KWH pylon tech battery (offered free upgrade to 3.55 if I place order in x weeks etc). 10yr warranty
    Power diverted to water heating (we have a 300l twin coil cylinder)

    Questions are ( I think)
    whether I should go for more panels or different spec of panel or is
    and is there any point getting a battery if I've a PHEV which spends most of its time plugged in during the day?

    Thanks in advance!


  • Registered Users, Registered Users 2 Posts: 1,838 ✭✭✭Deagol


    Hi Folks,
    If anyone has the patience I'd appreciate any advice - not just to compare pricing but more to know what spec I should go for, so I can balance vs proposals I'll get from installers.

    Detached house with plenty of south facing roof space. 2 adults and 2 young teens. Mix of underfloor heating and radiators. Oil fired central heating. House very well insulated following big refurb couple of years back.

    Currently have a PHEV and expect to go full EV with next car. Low enough mileage on average.
    annual Electric consumption = 7,700 KWH

    Quoted EUR 10,000 including vat and after allowing for the grant for Supply and install as below, though this is before any site survey (Lockdown)

    4.48 kwp system = 14 x 320w amerisolar panels. 20 Yr warranty
    Solis Hybrid inverter (pay 96 quid to extend warranty from 5 to 10 yrs). Unclear if I'd get 3 or 5k model)
    2.4 KWH pylon tech battery (offered free upgrade to 3.55 if I place order in x weeks etc). 10yr warranty
    Power diverted to water heating (we have a 300l twin coil cylinder)

    Questions are ( I think)
    whether I should go for more panels or different spec of panel or is
    and is there any point getting a battery if I've a PHEV which spends most of its time plugged in during the day?

    Thanks in advance!

    Hi, that's a crazy quote - way overpriced. Wouldn't worry about the make of panels, they are mostly similar enough and they aren't a serious part of the expense.

    Go for as many panels (limited I think to 6.2kw) as you can, the panels are cheap in comparison to the labour to fit them so while they're up on the roof get as many as you can!

    Don't bother with paying for extra warranty for anything - it won't pay you as their will still probably be a charge for fitting etc. Extended warranties are never worth it in my opinion.

    DOn't have an electric car so can't comment that authoritively but for me, I would expect you need a higher rated battery - would have thought minimum 5kw. And I don't know if the current output matters with PHEV etc, but the pylontech's are limited output - I would check if it makes sense to spend a little extra and go with a 'better' battery. EDIT: Just realised I didn't address your question. I'd guess your PHEV battery is about 6kw? If so, that would take a couple of hours in the summer/ nice weather to charge even if it was fully empty. After that you'll be sending any surplus to hot water diverter(?) or the grid. If you have a battery system you keep it for later use. Financially it's probably not going to pay over the life of the system. But once we are all smart metered up, you could potentially be able to charge that battery for free (Bord Gais already doing a tarriff with free power on Saturdays).

    The hot water diverter, I have one and I like it but the argument is made now that for the price of them and with FIT coming, they don't make sense. For me, I have the same setup as you (300litre tank with twin coils) and I like not having to turn on the immersion heaters to heat water on demand. With the diverter I can see what temperature is in my tank (i have an eddi with optional relay board and a couple of RTD's in the tank) remotely. So far this year I haven't turned on the immersions because the boiler either has made enough and the solar has topped it during the day once the battery is charged. I don't think the pure financial argument is always the right one.


  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    Quoted EUR 10,000 including vat and after allowing for the grant for Supply and install as below, though this is before any site survey (Lockdown)

    F**k a duck... That's a scandalous price. Nearly double what it should be.

    My advice is price around, don't be afraid to be a pain in the hole coming back here every whop round asking advice again.

    Plenty will attest that I did just that. Had about 6 quotes as far as I recall but when I eventually settled on one most here agreed that it was extremely competitive.

    As for the system you need, fit in as many panels as you can. Don't worry about going any higher for the battery than 2.4kWh as it starts to lose the financial benefit at that stage.


  • Posts: 0 [Deleted User]


    10k for that after grant? That quote should be halved.

    You should be paying 5k max there. Absolute max.

    Who's giving these crazy quotes?


  • Registered Users, Registered Users 2 Posts: 1,838 ✭✭✭Deagol


    6 wrote: »
    10k for that after grant? That quote should be halved.

    You should be paying 5k max there. Absolute max.

    Who's giving these crazy quotes?

    The installers who are getting plenty of business from people who are clueless I would guess.


  • Closed Accounts Posts: 891 ✭✭✭sebdavis


    I got a quote similar from a company when I was getting mine done. Told him my target price and the answer was "I wouldn't get the panels out of the shed for that money". He wanted 10k+ AFTER grant.
    Some rip off merchants knocking around, it is a pity SEAI don't lock the system down


  • Registered Users, Registered Users 2 Posts: 1,838 ✭✭✭Deagol


    sebdavis wrote: »
    I got a quote similar from a company when I was getting mine done. Told him my target price and the answer was "I wouldn't get the panels out of the shed for that money". He wanted 10k+ AFTER grant.
    Some rip off merchants knocking around, it is a pity SEAI don't lock the system down

    Free market - Caveat Emptor!


  • Registered Users, Registered Users 2 Posts: 5 agencydude


    Hi guys
    I'm considering getting some electric PV panels where I'd be able to get a SEAI grant.
    My current usage over 12 months is about 4000 Kwh on Daytime tariff and 4000 KWH on night time tariff. I charge an electric car at night time.

    One EV panel installation supplier offered the following 3 options:
    Option 1

    8 Longi Solar (360 W panels) generating 2.9 kwp
    3.0 kVA TSUN Microinverter
    Mounting system : K2 Solidrail
    NO Battery
    Cost After Grant : 3990 euros

    Option 2
    10 TrinaSolar (370 W panels ) generating 3.7 KWp
    Huawai Hybrid inverter 3.3 KVA
    Battery : Huawei LUNA 2000 5.0 KWh
    Mounting system : ValkPitch
    Cost After Grant : 7080 euros

    Option 3
    12 Q CELLS (390 W panels) generating 4.7 KWp
    Sonnen Hybrid inverted 4.6 kVA
    Battery : Sonnen 9.53 7.5 kWh
    Mounting system : ValkPitch
    Cost After Grant : 10390 euros


    On top of these costs if I want an immersion diverter it would be an extra 490 euros
    And a monitoring system from my phone would be 240 euros.

    How do the above figures look to you guys?
    Would any of these options be worth going for?


  • Registered Users, Registered Users 2 Posts: 114 ✭✭Tuttlinghorn


    sebdavis wrote: »
    I got a quote similar from a company when I was getting mine done. Told him my target price and the answer was "I wouldn't get the panels out of the shed for that money". He wanted 10k+ AFTER grant.
    Some rip off merchants knocking around, it is a pity SEAI don't lock the system down


    Thanks - the quote came from a company registered with SEAI.
    I’ll keep shopping.
    Interested in any other viewpoints on the size / capacity / brand of the panels
    And On the battery vs diverted vs EV ...
    thanks All!


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 12,882 ✭✭✭✭DrPhilG


    agencydude wrote: »
    Hi guys
    I'm considering getting some electric PV panels where I'd be able to get a SEAI grant.
    My current usage over 12 months is about 4000 Kwh on Daytime tariff and 4000 KWH on night time tariff. I charge an electric car at night time.

    One EV panel installation supplier offered the following 3 options:
    Option 1

    8 Longi Solar (360 W panels) generating 2.9 kwp
    3.0 kVA TSUN Microinverter
    Mounting system : K2 Solidrail
    NO Battery
    Cost After Grant : 3990 euros

    Option 2
    10 TrinaSolar (370 W panels ) generating 3.7 KWp
    Huawai Hybrid inverter 3.3 KVA
    Battery : Huawei LUNA 2000 5.0 KWh
    Mounting system : ValkPitch
    Cost After Grant : 7080 euros

    Option 3
    12 Q CELLS (390 W panels) generating 4.7 KWp
    Sonnen Hybrid inverted 4.6 kVA
    Battery : Sonnen 9.53 7.5 kWh
    Mounting system : ValkPitch
    Cost After Grant : 10390 euros


    On top of these costs if I want an immersion diverter it would be an extra 490 euros
    And a monitoring system from my phone would be 240 euros.

    How do the above figures look to you guys?
    Would any of these options be worth going for?

    Pretty awful figures again. What water diverter are they offering at nearly €500? For that price you'd need to be getting an Eddi. If it's a Solic or whatever they're called, then they're charging double what they should.

    And €240 for use of an app? Da fuk???

    Ask yourself if you really need that much storage. If payback time is important then anything over 2.4kWh is unnecessary.

    Is 12 panels the most you can fit? Far better to get more panels and less battery.


This discussion has been closed.
Advertisement