Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
Ze Bulli
Comments
-
-
-
Should of called this thing the Hummer, ates the juice so it does
Took me 3 times to get the coil wrapped properly, was getting hotspots but managed to wrap it correctly in the end.
Have it going now @ 2.2 Ohms and 4.2 v on my Box mod at the moment giving me 8 watts.
Works fine on the eGo batteries.
The more i use it the more i like it, tastes great.
Ya really need to be mixing your own juice to keep this running if your gonna use it exclusively !
So far so good.0 -
-
Got mine today aswell
no time to play with it tho
Requires a bit of patience setting up giving plenty of time to oxidise the mesh.
Burn the wire too and definitely use a tweezers wrapping around the posts.
Keep the posts close to the mesh when wrapping around them, then pull them away from the mesh which will tighten the coil.
The bottle with needle makes filling very easy.
That's all i know so far really, gonna play around with it over the next while.
Camera is broken so can't post pics of mine setup.0 -
Should of called this thing the Hummer, ates the juice so it does
Took me 3 times to get the coil wrapped properly, was getting hotspots but managed to wrap it correctly in the end.
Have it going now @ 2.2 Ohms and 4.2 v on my Box mod at the moment giving me 8 watts.
Works fine on the eGo batteries.
The more i use it the more i like it, tastes great.
Ya really need to be mixing your own juice to keep this running if your gonna use it exclusively !
So far so good.
Good stuff derra, sounds like it was painless enough to get setup......looking forward to it now....0 -
-
-
-
Advertisement
-
Since this is the bulli thread, thought i might mention it again!! Couple of pics of it on the Don, in mini mode and regular. The ego collar fits nicely on it aswell to finish it off...
How's the Don working out for ya? Looks the business Gryzor, as far as repairables go i doubt ya beat it for simplicity. Couple of minutes and your good to go. Have some more wick arriving tomorrow, will send you and Alec a bit in the post when i get a chance.
The Box mod i have has suddenly stopped working and i'm using an eGo on the Line now which is probbably not ideal.
It works but ya gotta be sure it is set up perfectly or it could damge the battery, luckily i knew it was ok before the mod died.
The taste out of it is something else, it feels like a real clean vape.
The second repair drove me nuts getting it right, kept getting a hotspot on the bottom and multiple firing quickly probably killed my mod :rolleyes:
Ya can fiddle around with it and hope that it stops or go again and again and again
After a few times though it will become second nature to repair and worth the effort.0 -
-
I sort of agree - this is like some sort of vaping sub-club. also maybe the name should be changed from repairable atty to repairing atty - as in most of the time seems to be spent tinkering with the things and blowtorches, metres of wire and mesh etc etc are required....
This is a thread within a forum about a particular aspect of vaping.
It's your choice whether you want to read or participate in it.
Don't see how it affects the rest of the forum, never did before and no reason why it should now.
Just don't bother reading it if it annoys ya that much 0 -
-
-
-
Advertisement
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
Don't knock it till you try it, your heading in the right direction now anyway.
Change wick and wire at your pleasure and your away in a hack at more or less whatever resistance you want to suit your needs.
I may well end up getting one eventually alright - just having a look through this thread to get an idea of the thing it's difficult to make out what's going on sometimes! Think that I'll buy some bulli fibreglass to see how it works. That way I could reuse the metal part of the imist wick and just replace the thread material.0 -
-
Done another repair on the Line and it's rockin'
Really starting to enjoy this atty now.
The way Scott does it in the video is ideal, wrap the wire around the small post first, then mesh then second post.
This way makes the wire really tight, put something in the mesh sticking out a little bit when winding to keep it's shape.
May cut nic level from 6mg to 3mg on this atty, very effective nicotine delivery system :pac:0 -
Struggling with this yoke lads, getting a hotspot on the bottom of the coil between the wick and the post, if i hold the button for longer than a couple of seconds, the wire pops. Wrapped around 4 coils at this stage, same result each time
Any ideas?? 0 -
Struggling with this yoke lads, getting a hotspot on the bottom of the coil between the wick and the post, if i hold the button for longer than a couple of seconds, the wire pops. Wrapped around 4 coils at this stage, same result each time
Any ideas??
Don't smash it against the wall just yet, i bet you feel like doing that.
What wire are you using?
I'm using Kanthal A .20, i believe anything less will make it more likely to pop.
Have not tried it yet with Nichrome .20 which is thinner wire.
Has to be wrapped tight around the posts, should not be able to move it easily up or down the posts.
Check the resistance of the setup before firing up as well.
I'm getting 1.9 0hms, Looking at 3 turns on one side and 4 on the other.
I've had a couple pop on me as well. Gotta make sure the coil is fairly neat with sufficient space so that it doesnt touch off itself crossing over to the post.
Don't have the bottom turn close to the base, should be up clear from that.
When ya manage to wire it up and ya get a hotspot but stays in tact, just fiddle around a bit, push the post out a bit or in, hit gently off the wire with a pin, burn some juice on it.
Stick with it.0 -
Advertisement
-
-
-
-
-
-
-
I have the same HG wick and was trying for ages to rewick an Ego-C atty with it....didn't work. Green Hornet gave me a tip of soaking it in alcohol so I made up a wick, put it vodka for an hour or so, dried it out and it works even better than the original. Maybe this might work for you.
Cheers Bubba, will give that a try so.
Hopefully it softens the wick as it's too stiff and hard, fecking fibreglass on viagra compared to the Bulli wick.
Then i'm thinking was it treated with some sort of mad chemical
0 -
I dunno what to do ... lost ... spent few hours trying to set up the line.. No luck... No matter how many turns of wire i did ( nichrome 0.2, kanthal d 0.20 , kanthal d 0.16 )-- multimeter and provari showing resistance 1-1.2 ohms
faulty atty , i presume ?0 -
-
Advertisement
-
Any luck yet Alec?
Here is mine on a eGo battery @ 1.9 Ohms
0 -
-
-
-
Sir Digby Chicken Caesar wrote: »i look forward to hearing, in a couple of months when you've gotten sick of fiddling with it, how often you find yourself having to repair it
does look awesome though
I'm sick of fiddling with it now tbh Not the easiest thing to repair.
Probably every couple weeks i would have to replace the wire.
Keep saying it but it eats the juice.0 -
-
Advertisement
-
-
Sir Digby Chicken Caesar wrote: »how much are you using a day now, compared to before?
using about 3ml a day on my LT w/ chibi tank, you think you go through more than that? im not really happy to be using 3ml a day, it's gonna add up
I would say you could double that amount if ya used the Line all day and maybe more but ya be cutting the nicotine strength.
Before the Line i was probably at 2ml a day, 6mg strength, not sure really as i'm dripping into the Bulli.
I'm using 3mg on the Line and 6mg on the Bulli.
Probably averaging around 4ml a day now, i just use up whatever is neccessary tbh.0 -
-
-
-
Advertisement
![[Deleted User]](/applications/dashboard/design/images/defaulticon.png)
https://www.youtube.com/watch?v=tS_k27EUbWQAdvertisement