Detailing chat

Hebegeebee · 13-02-2020 10:45PM

micks_address wrote: »

Hi folks,

Planning to wash and put sonax polymer net shield on new car the next dry day I get.

The following seems ok?:
1) snow foam
2) powerwash
3) two bucket wash
4) powerwash
5) clay
8) dry
9) apply polymer. Spray on applicator, do smaller sections, buff off with microfiber as it haze's

What I'm not sure about is after claying. Can I go straight to dry or do I need to two bucket wash again and then dry?

Cheers,
Mick

If it’s a brand new car you should also consider the fallout removal step(s) as it’s not unusual for it to be present.

Hebegeebee · 13-02-2020 10:49PM

dastardly00 wrote: »

Is Slim's the best place to buy Bilt Hamber Snow Foam?
I normally use Reflect Auto Care for Bilt Hamber prodcuts but they don't stock it.

Slims are about the cheapest for BH Auto foam if that’s what you mean by best. Their shipping is usually about 4 days; I’ve bought from them a few times and the shipping has been quick and the orders have been well packaged.

PsychoPete · 13-02-2020 11:30PM

If my memory serves me correct theres a place in Mullingar that sells bilt hamber

dastardly00 · 14-02-2020 11:08AM

Thanks all for info about my Bilt Hamber question; much appreciated

Stallingrad · 14-02-2020 12:08PM

Are people still washing their cars? I've give up until after storm season.

Cantona's Collars · 14-02-2020 01:12PM

Stallingrad wrote: »

Are people still washing their cars? I've give up until after storm season.

I washed mine and the wife's last week,one reason was that the kids were getting destroyed climbing in and out.

As an aside,Aldi have a polisher in stock on Sunday.I wonder if it's any good?

https://www.aldi.ie/ferrex-car-polisher/p/700795314278500

Stallingrad · 14-02-2020 01:15PM

Cantona's Collars wrote: »

https://www.aldi.ie/ferrex-car-polisher/p/700795314278500

Almost guaranteed to burn and swirl the paint to bits in untrained hands!

MetzgerMeister · 14-02-2020 01:17PM

Stallingrad wrote: »

Almost guaranteed to burn and swirl the paint to bits in untrained hands!

I would tend to agree

Doctors room ghost · 14-02-2020 01:21PM

Cantona's Collars wrote: »

I washed mine and the wife's last week,one reason was that the kids were getting destroyed climbing in and out.

As an aside,Aldi have a polisher in stock on Sunday.I wonder if it's any good?

https://www.aldi.ie/ferrex-car-polisher/p/700795314278500

I hoovered mine this morning and cleaned glass inside and out and cleaned the lights.not washing it lately.roads covered in sh1te and it p1ssing rain every second minute.
No point being a busy fool.

PsychoPete · 14-02-2020 02:46PM

Whatever the weather is I wash mine every week

RoryMurphyJnr · 14-02-2020 02:58PM

Have to wash mine this weekend, inside and out.
Travel the length of the M50 to and from work each day so you can only imagine the state of the car

MetzgerMeister · 14-02-2020 03:49PM

Haven't washed mine in 2 weeks. Having gotten new tyres the alloys are all paw marks and that's annoying me more than the layer of crud on the car :pac:

limnam · 14-02-2020 03:53PM

MetzgerMeister wrote: »

Haven't washed mine in 2 weeks. Having gotten new tyres the alloys are all paw marks and that's annoying me more than the layer of crud on the car :pac:

3 or more for me it's been so hard to keep it clean recently

Masala · 14-02-2020 06:03PM

Yep... its on my list of TO DO this weekend......hope the rain stays away as planned to apply a coat of wax as well!

Doctors room ghost · 14-02-2020 06:05PM

Masala wrote: »

Yep... its on my list of TO DO this weekend......hope the rain stays away as planned to apply a coat of wax as well!

There’s a national warning for a deluge of rain for the 3 days along with Dennis.ye May forget the polishing I’d say

PsychoPete · 14-02-2020 08:11PM

MetzgerMeister wrote: »

Haven't washed mine in 2 weeks. Having gotten new tyres the alloys are all paw marks and that's annoying me more than the layer of crud on the car :pac:

It annoys me when I see tyre paste all over the wheel and tyre

Flyin Irishman · 15-02-2020 01:07PM

Stallingrad wrote: »

Almost guaranteed to burn and swirl the paint to bits in untrained hands!

MetzgerMeister wrote: »

I would tend to agree

How come? I've never used a polisher and was debating whether to pick this up as a cheaper way to try it out. What would be the things to look for/avoid if buying a polisher?

edburg · 15-02-2020 02:19PM

Flyin Irishman wrote: »

How come? I've never used a polisher and was debating whether to pick this up as a cheaper way to try it out. What would be the things to look for/avoid if buying a polisher?

For beginners and DIY head's a Dual Action machine is normally always the recommended safer option it will create less heat as while spinning they have a throw moving around 10-21mm and if you put to much pressure on they generally can be seen to stop spinning or slow significantly.

Using foam pads like 3m, CG hexlogic and lake country will also help with heat dispersion to.

Your Aldi one being a rotary machine will have less room for mistakes, it basically just spins directly from motor in one spot creates a lot more heat and very easy to burn clear coat creating some horrid looking finish to cars paint. I generally also found rotary machines to be a lot heavier to use to creating more pressure on pads = more heat.

In right hands Rotary can make quick work of rough/heavy jobs but in wrong hands can lead to an expensive harsh lesson in polishing. While the DA will take longer but much harder to go all Pete Tong.

some longer winded explanation from the web

https://meguiarsonline.com/forums/showthread.php?1395-Rotary-Buffer-vs-DA-Polisher-vs-Traditional-Orbital-Buffer&s=

vectra · 15-02-2020 02:55PM

Cantona's Collars wrote: »

I washed mine and the wife's last week,one reason was that the kids were getting destroyed climbing in and out.

As an aside,Aldi have a polisher in stock on Sunday.I wonder if it's any good?

https://www.aldi.ie/ferrex-car-polisher/p/700795314278500

Stallingrad wrote: »

Almost guaranteed to burn and swirl the paint to bits in untrained hands!

MetzgerMeister wrote: »

I would tend to agree

On another note,
You wont be long getting fed up with hulking 4kg to machine polish a car.

Also
as above posters said, You will almost certainly end up with buffer trails/holograms all over the paint.
Get a Das6 Pro.

micks_address · 15-02-2020 06:25PM

Ok so i wimped out and went to a professional. Got sonax cc63 ceramic coating applied. They did paint correction as well. More than I wanted to spend but sure hopefully will keep the paint in good condition. Just collected the car and it looks great. They had it two days.

I'll post pics tomorrow. Got the interior leather ceramic coated as well..

micks_address wrote: »

Hi folks,

Planning to wash and put sonax polymer net shield on new car the next dry day I get.

The following seems ok?:
1) snow foam
2) powerwash
3) two bucket wash
4) powerwash
5) clay
8) dry
9) apply polymer. Spray on applicator, do smaller sections, buff off with microfiber as it haze's

What I'm not sure about is after claying. Can I go straight to dry or do I need to two bucket wash again and then dry?

Cheers,
Mick

micks_address · 15-02-2020 07:03PM

Took that now but it's practically dark.
Will take some more in daylight tomorrow

micks_address wrote: »

Ok so i wimped out and went to a professional. Got sonax cc63 ceramic coating applied. They did paint correction as well. More than I wanted to spend but sure hopefully will keep the paint in good condition. Just collected the car and it looks great. They had it two days.

I'll post pics tomorrow. Got the interior leather ceramic coated as well..

vectra · 15-02-2020 08:38PM

That ^^ Looks super glossy,
Often pondered over that Sonax ceramic.
Did you get the wheels done as well?

micks_address · 15-02-2020 08:42PM

vectra wrote: »

That ^^ Looks super glossy,
Often pondered over that Sonax ceramic.
Did you get the wheels done as well?

Yes all done. Cullen car care in malahide road industrial estate

vectra · 15-02-2020 08:43PM

micks_address wrote: »

Yes all done. Cullen car care in malahide road industrial estate

Any particular products needed for after care?

micks_address · 15-02-2020 08:54PM

vectra wrote: »

Any particular products needed for after care?

Wash every two weeks. Top up with sonax polymer net shield every six months..should last three years

micks_address · 15-02-2020 09:08PM

micks_address wrote: »

Wash every two weeks. Top up with sonax polymer net shield every six months..should last three years

Anyone use opticoat no rinse shampoo?

micks_address · 16-02-2020 12:03PM

micks_address wrote: »

Anyone use opticoat no rinse shampoo?

Couple of daytime pictures

Corbother · 16-02-2020 08:03PM

micks_address wrote: »

Couple of daytime pictures

What a stunning machine. Beautiful colour and interior. Enjoy driving her.

colm_c · 22-02-2020 08:32PM

I have a small annoying stain/mark on the glass/lcd on my motorbike screen.

I have tried washing it off with some mild products including car shampoo and wd40.

Not shifting at all.

Would a detailer be able to look at it and advise/remove it?

vectra · 22-02-2020 09:08PM

colm_c wrote: »

I have a small annoying stain/mark on the glass/lcd on my motorbike screen.

I have tried washing it off with some mild products including car shampoo and wd40.

Not shifting at all.

Would a detailer be able to look at it and advise/remove it?

is it perspex?

Detailing chat

Comments