Ze Bulli

derra

Getting closer with this RDA after back stepping a bit.
Done a few repairs but just could'nt get it right, one thing was missing or another each time.

I was too mean with the wick :rolleyes:

4GF seems fine (Bulli wick), Nichrome .2 wire and 6 turns of that using a blunt needle as a splint to support the wick when winding.
http://www.thebestshop.eu/diy/blunt-needle/prod_208.html

Just be fairly generous with the wick so that it curls around the base of the atty comfortably, bit of lag on it.

The case has a air hole, when placing back on ,make sure it's in front of the coil.

It's not pocket friendly when loaded up, it will leak. When using at home, just have it standing up when not in use.

I think 6 drops or so is plenty (inawera bottles) don't wanna flood the thing, just add a few drops when neccesary. Like any dripping atty ,you will know when juice is needed.

Loads of vapour at the moment, nice throathit.

Just have to mix up a bit of juice now and compare them.
The flavour is great at the moment but could be that bit better, just have to see if i need to lower the flavouring dose as the taste is strong and i hope it's not that i have too much wick.

When ya get new atties and juice to mix etc, ya tend to overdo it experimenting :pac:

alec76

Gryzor wrote: »

meant to ask before alec, how's you get on with the bulli clone?? Is it worth a punt??

i dunno , price went up since i bought it - i think it is 2000 rub delivered ( 52 euro or so )-- u can get original Bulli for this ....
to be honest i didnt play much with this clone ( just a back up If u wanna try it -- let me know - i could send u mine for couple weeks

Gryzor

Original bullis are hard to come by these days...id buy one in a flash if i could...

Where did you buy the clone?? The site i found them on won't ship outside russia...

alec76

Gryzor wrote: »

Where did you buy the clone?? The site i found them on won't ship outside russia...

I got it direct from breathe

http://www.ecigtalk.ru/forum/f20/t12472.html

derra

alec76 wrote: »

What u think about it flavour/taste wise , in comparison to Line ?
i think my Line working better now, still can't achieve RTA results .....

For me it's much more enjoyable than the Line Alec
Easy setup, fantastic flavour, a real smooth draw with nice hitting throathit.
This is one serious dripping atty i tell ya

Can only imagine what the RTA is like with wick immersed in juice, there be no dry hits etc ?
Have the money in PayPal from the sale of the Line, am thinking strongly in getting the RTA.

Have you done a repair since with Bulli wick only?

alec76

Can only imagine what the RTA is like with wick immersed in juice, there be no dry hits etc ?

..i am getting dry hits once in awhile, it is working great in general though....

Have you done a repair since with Bulli wick only?

it is combination of ekowool http://www.ekowool.com/assortment5
and bulli wick , month old already

derra

alec76 wrote: »

..i am getting dry hits once in awhile, it is working great in general though....
it is combination of ekowool http://www.ekowool.com/assortment5
and bulli wick , month old already

Will just get one.
Hardly a bad word about them on the forums and they hold their value.

Yeah forgot about that where the coil is, ya need the extra thickness for wrapping if using Bulli wick inserting into the holes.
Thanks for the link.

I can see the wick lasting a lot longer on the RDA than on the Bulli.

3 dripping atties now so i need a tank one.

alec76

derra wrote: »

Will just get one.
Hardly a bad word about them on the forums and they hold their value.

so i need a tank one.

I would get Tank «Kaifun» , pity there is no SS version available

derra

alec76 wrote: »

I would get Tank «Kaifun» , pity there is no SS version available

Hopefully he will do SS at some stage and if he does i will consider it then.
This one yeah?
http://shop.svoemesto.ru/index.php?productID=684


See the Hellfire?
http://ukvapers.com/topic/13088-the-hellfire-rebuildable-tank/

http://ukvapers.com/topic/15541-hellfire-rebuildable-tank/

Needs a bigger capacity though and maybe a price drop

alec76

derra wrote: »

Hopefully he will do SS at some stage and if he does i will consider it then.
This one yeah?
http://shop.svoemesto.ru/index.php?productID=684

yep, airflow control , tank 7 ml ( if i am not mistaken) , juice collector .....

derra

alec76 wrote: »

yep, airflow control , tank 7 ml ( if i am not mistaken) , juice collector .....

7ml !!
That's a huge amount to hold.

Bit on the expensive though when it's not SS.

In no rush to get another atty so will see what comes out in the meantime.

alec76

I probably wrong ,5-6 ml tank..Too expensive for brass alright...., could u imagine price for SS version .....Different league though ..same as Golden Greek...

derra

alec76 wrote: »

I probably wrong ,5-6 ml tank..Too expensive for brass alright...., could u imagine price for SS version .....Different league though ..same as Golden Greek...

Even 4ml would be sufficient.
SS be dear alright, if i had any sense i should be happy with what i have now.

GG stuff seems really sought after.
Mad money some of their stuff sells for.

$1300 for a GGTS
http://ukvapers.com/topic/14951-worlds-most-expensive-pv/

alec76

Seems to take about 10 drops, pools at the bottom of the chamber and the wick feeds it to the coil.
Someone put fluval at the bottom to soak in the juice allowing 1.5-2 ml of juice.

Have u tried it already? if it is works , no need for RTA really ....

newmark

Bulli A2-T back in stock if anyone was waiting to order one. I got an email notification today to this link http://bulli-smoker.de/index.php?a=79&jtl=v

alec76

A2 Classic SS in stock aswell...

alec76

alec76 wrote: »

placed the order for mesh 400 and 0.20 Nicr wire , we'll see

The wire i've got was Nickel , not Nichrome...realized it while ago , was going to make first wick with it..... as usual got the lighter to prepare it for the winding ....and wire start to produce sparks ..like a bloody Sparkler .. new year eve came early this time
Dan was very helpful, he is posting Nichrome wire tomorrow free of charge....
Although he said

The E. cig guys do buy a lot of the NICKEL as well

Who are those guys i wonder , what are they doing with this ?....

Gryzor

alec76 wrote: »

A2 Classic SS in stock aswell...

Beauty, got an order in :-)

derra

alec76 wrote: »

Have u tried it already? if it is works , no need for RTA really ....

Might try it later with the filter from the A2.
Although, i was a bit more patient earlier and put 20 drops into it, let it settle for a short while and vapes perfectly.
That's plenty of juice to get in for a dripping atty.

alec76 wrote: »

A2 Classic SS in stock aswell...

He must of made a lot this time around, still available so they are.

alec76 wrote: »

The wire i've got was Nickel , not Nichrome...realized it while ago , was going to make first wick with it..... as usual got the lighter to prepare it for the winding ....and wire start to produce sparks ..like a bloody Sparkler .. new year eve came early this time
Dan was very helpful, he is posting Nichrome wire tomorrow free of charge....
Although he said

Who are those guys i wonder , what are they doing with this ?....

The mind boggles, must be going for a sparkling juice flavour or something.

Gryzor wrote: »

Beauty, got an order in :-)

Jammy git, people have been waiting and watching that page for months and you get one just like that

Gryzor

derra wrote: »

Jammy git, people have been waiting and watching that page for months and you get one just like that

Thanks to the eagle eyed boardies

derra

Gryzor wrote: »

Thanks to the eagle eyed boardies

Try the RDA if ya have change left over, well worth a punt

Gryzor

derra wrote: »

Try the RDA if ya have change left over, well worth a punt

Stop it!!

derra

Gryzor wrote: »

Stop it!!

Was waiting for that.

Sir Digby Chicken Caesar

damnit
just got back from town after heading in to put money on the card, and they're out of stock

too many damn vapers on the planet

on the plus side.. maybe now I can afford a provari

although im not sure why id need one if I have a lavatube

derra

Sir Digby Chicken Caesar wrote: »

damnit
just got back from town after heading in to put money on the card, and they're out of stock

too many damn vapers on the planet

on the plus side.. maybe now I can afford a provari

although im not sure why id need one if I have a lavatube

That's a pity although Bulli A2 works best in dripping imo, the RDA will cater for your needs.

Sir Digby Chicken Caesar

yeah im getting impatient now though
wonder if I pm him offering an extra 50 will he bump my name

derra

Sir Digby Chicken Caesar wrote: »

yeah im getting impatient now though
wonder if I pm him offering an extra 50 will he bump my name

I'll sell ya mine for 50

Sir Digby Chicken Caesar

hehehehe

i currently have the provape website open atm looking at the different options for a v2.

i shouldn't. I know I really shouldn't. in a way i'd be saving money as I wouldn't have to buy a multimeter to measure the rda's ohms when I get it.

derra

Sir Digby Chicken Caesar wrote: »

hehehehe

i currently have the provape website open atm looking at the different options for a v2.

i shouldn't. I know I really shouldn't. in a way i'd be saving money as I wouldn't have to buy a multimeter to measure the rda's ohms when I get it.

Very expensive mulitmeter

Hardware shop in Bray here sells them from €10-15.

ps: does the Lavatube not read under load?

Sir Digby Chicken Caesar

hush with your sensible alternatives :P