Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

DOVADO UMR - 3G USB router (For use with O2, Three & Vodafone)

1…232425262729»

Comments

  • #842
    itu
    Registered Users, Registered Users 2 Posts: 5 ✭itu


    hi
    i have dovado umr, i upgraded the firmware and the it is bo longer responding. i cannot access the webpage when i dial the ip :192.168.0.1
    please help


  • #843
    eirator
    Closed Accounts Posts: 1,520 ✭✭✭eirator


    itu wrote: »
    hi
    i have dovado umr, i upgraded the firmware and the it is bo longer responding. i cannot access the webpage when i dial the ip :192.168.0.1
    please help

    Whats the IP address of the computer you are using to connect from?


  • #844
    itu
    Registered Users, Registered Users 2 Posts: 5 ✭itu


    I made the ip for my computer : 192.168.0.2


  • #845
    eirator
    Closed Accounts Posts: 1,520 ✭✭✭eirator


    itu wrote: »
    I made the ip for my computer : 192.168.0.2

    Fair enough - I was just checking the obvious ;)


  • #846
    Commsoft
    Registered Users, Registered Users 2 Posts: 32 ✭Commsoft


    itu wrote: »
    hi
    i have dovado umr, i upgraded the firmware and the it is bo longer responding. i cannot access the webpage when i dial the ip :192.168.0.1
    please help

    If the factory reset* doesn't resolve it, you'll need to try the Rescue utility which can be downloaded at http://commsoft.ie/download/Dovado.UMR.Rescue.exe

    *To reset, power on the UMR without a modem installed and then press and hold the reset button (inset at the back) with a small screwdriver or similar implement for 8secs and then release.

    Regards

    Gerry, Commsoft Ltd


  • Advertisement
  • #847
    itu
    Registered Users, Registered Users 2 Posts: 5 ✭itu


    commsoft thank you for that advice but it didn't work.
    i tried resetting it nothing happens the led for wan,wifi and power are on.
    i also downloaded the rescue software but its says my local ip settings are wrong.
    bit i am sure my ip is 192.168.0.2


  • #848
    itu
    Registered Users, Registered Users 2 Posts: 5 ✭itu


    the WIFI LED becames on instantly as i insert power


  • #849
    itu
    Registered Users, Registered Users 2 Posts: 5 ✭itu


    now it says "error in file upload: a connection attempt failed because the connected party did not properly respond after a period of time, or established a connection failed because connected has failed to respond


  • #850
    Commsoft
    Registered Users, Registered Users 2 Posts: 32 ✭Commsoft


    itu wrote: »
    commsoft thank you for that advice but it didn't work.
    i tried resetting it nothing happens the led for wan,wifi and power are on.
    i also downloaded the rescue software but its says my local ip settings are wrong.
    bit i am sure my ip is 192.168.0.2

    To make the Rescue utility work you must connect to the UMR via ethernet cable and setup your PC's LAN connection with a static IP address of 192.168.1.2 - follow the instructions on the Rescue utility thereafter. Fingers crossed.

    Gerry, Commsoft Ltd


Advertisement