Manuals / Request a manual

cerastes · 04-09-2013 12:22pm

I am looking for an installation manula for a securewave 1070
and
Siemens SPC 4000 (4300) manual.

KoolKid · 04-09-2013 12:31pm

Sent you those

cerastes · 04-09-2013 1:36pm

KoolKid wrote: »

Sent you those

thanks, I just sent you a pm reply

Perrin2040 · 07-09-2013 11:19am

Demosthenese wrote: »

Could i get a copy of that engineer manual too please,

thanks in advance!

Could I get a copy of the engineers manual too, same issue as the last few, moved into a house and need to change some windows etc, also want to change the code if possible.

Cheers in advance, you are an absolute gent Koolkid.

KoolKid · 07-09-2013 11:53am

Sent you that. Hope it helps..

mau_52 · 18-09-2013 8:11am

Hi there,
Same problem here, moved in a new house and the agent can't find the alarm code. The system is unset but few days ago a little "friend" press the PA buttons :-( i had to take the wire out for the sounder but the light outside is still flashing. Any help would be really appreciated. The alarm panel is HomeGuard by SCOPETRONIC

KoolKid · 18-09-2013 8:35am

mau_52 wrote: »

Hi there,
Same problem here, moved in a new house and the agent can't find the alarm code. The system is unset but few days ago a little "friend" press the PA buttons :-( i had to take the wire out for the sounder but the light outside is still flashing. Any help would be really appreciated. The alarm panel is HomeGuard by SCOPETRONIC

I PMed you that. If you need any help you know where to find us..

mau_52 · 18-09-2013 9:44am

Thank you,
Hopefully I will sorted out :-)

Peterhickey · 19-09-2013 11:39pm

Hi guys got my hands on an old hkc 6/10 there this evening looking for someone to help me find an installation manual for same. Would appreciate any help or links ye could give me, anxious to install this panel into my mums house in place of an old europlex homeguard panel which has died. Thanks in advance.

KoolKid · 20-09-2013 5:09am

Sent you that.

Bushmech · 20-09-2013 9:08am

Hey Koolkid can you send me the engineers manual for the HKC Quantum 70.

Thanks
Newbie Bushmechanic

KoolKid · 20-09-2013 9:12am

Bushmech wrote: »

Hey Koolkid can you send me the engineers manual for the HKC Quantum 70.

Thanks
Newbie Bushmechanic

Sent you that. Hope it helps.

Bushmech · 20-09-2013 10:53am

Thanks for that KoolKid, The SW-1070 control panel looks slightly different from my Quantum 70 but all the functionality looks the same as do the dectectors and SABB so hopefully it'll be fine.

Thanks again

Bushmech

KoolKid · 21-09-2013 1:05am

Bushmech wrote: »

Thanks for that KoolKid, The SW-1070 control panel looks slightly different from my Quantum 70 but all the functionality looks the same as do the dectectors and SABB so hopefully it'll be fine.

Thanks again

Bushmech

No bother. It was a bit confusing which you wanted.
If you need the Quantum manual give us a shout.

Bushmech · 23-09-2013 8:12pm

If you have the Quantum 70 manual that would be great. I've run into a bigger issue, the quick keys are enabled and thats stopping me from getting into the "user" or "manager" menus at all. I should be able to press 0 then code then scroll through the menu but with the quick keys enabled as soon as I enter my code it arms/disarms the system.

Thanks for the help

Bushmech

KoolKid · 23-09-2013 8:25pm

PMing you that now...;)

Bushmech · 23-09-2013 10:57pm

Thanks again, it looks like the quick key menu will allow me to set-up a temporary user and I will then be able to define the temporary users access to menu's, I'll give it a go any way.

KoolKid · 24-09-2013 7:22am

I hope it helps. If you get stuck you know where we are.

Bushmech · 25-09-2013 11:29pm

Hi I saw from a previous post that the issue is that the instaler didn't give me the proper authorization to access the user or manager menus. I'll give them a call tommorrow. My original issue was to find which batteries needed to be replaced so I just went around them all with a multimeter. If anyone is interested they all use CR123A batteries which new were giving about 3.18 volts, all the PIR sensors had gone down to less than 2.8 volts and were changed the door sensors were all at 3.04 volts and I didn't change these as I didn't have enough batteries. I put all new batteries in the SABB (12) 6 of these were below 2.8 volts and 6 were at about 3.04 volts. Because it's harder to get at I put all new batteries in the SABB and reused the ones at 3.04 volts elsewhere. It will be interesting to see how long it will last like this. I'll get more batteries so I'll be ready. The system seems happy now no warnings but I still want proper access.

Thanks again for the help

Bushmech

jghutch1978 · 27-09-2013 9:24pm

Hello - I am looking for the engineer manual for the Aritech CS350.

I am re-doing my kitchen and it involves taking the main unit (not the keypad, the box with all the fuses etc in) off the wall to move it. I am assuming i need to power down the system to do it, any help (or the manual) much appreciated

Thanks

KoolKid · 27-09-2013 10:34pm

Sent you that. I hope it helps. Any problems you know where we are.

Jasper82 · 28-09-2013 3:26pm

KoolKid wrote: »

PMed you that.
If you need any help you know where we are.

Hi kool kid. Was looking for the Scopetronic engineers manual if possible. Would really appreciate it.
Cheers

KoolKid · 28-09-2013 3:57pm

Sent you that.

kiltubber · 29-09-2013 10:59am

Hello !

I am thinking of installing a HKC Quantun 70 wireless system in my house would like to get a look at the engineers manual before I go ahead and make a purchase.

Thanks,
John.

KoolKid · 29-09-2013 11:03am

PMed you that manual

monomer · 29-09-2013 7:39pm

Hi Koolkid,
Another one for the HKC Quantun 70 wireless system Engineers Manual.
Many Thanks.
M.

KoolKid · 29-09-2013 9:14pm

PMed you that....
Sorry if the PMs seem short & abrupt. Just have lots to get through lately.;)

KeRbDoG · 30-09-2013 10:47am

Hi folks, looking for the installation/engineers manual for the SW 1070 (Hybrid) unit if possible?

altor · 30-09-2013 1:20pm

KeRbDoG wrote: »

Hi folks, looking for the installation/engineers manual for the SW 1070 (Hybrid) unit if possible?

Sent you a P.M.

KeRbDoG · 30-09-2013 2:10pm

altor wrote: »

Sent you a P.M.

Appreciate that, thank you sir

altor · 30-09-2013 2:20pm

KeRbDoG wrote: »

Appreciate that, thank you sir

Your welcome, any problems let us know.

HugoM · 01-10-2013 9:01am

Hi there,

Just wondering if anyone could send me an installers manual for a HKC Securewatch? It was installed around 2010 if that makes a difference.

Thanks in advance.....

KoolKid · 01-10-2013 9:27am

I have PMed you that. Are you sure that your alarm is a Securewatch???
I can't understand why someone would be installing that system in 2010. There were much newer and better systems available for no extra cost.

HugoM · 01-10-2013 7:46pm

Thanks for that Koolkid.....

I'm not sure why it was used, I guess he had it lying around? It certainly wasn't the only thing scrimped on when the house was built!

HugoM · 01-10-2013 10:10pm

Is there any chance you'd have a installer manual for a HKC GSM-P as well?

altor · 01-10-2013 10:23pm

HugoM wrote: »

Is there any chance you'd have a installer manual for a HKC GSM-P as well?

Sent you that by P.M.

NotBored · 02-10-2013 6:06pm

Hi, We also have the same problem. We replaced doors and windows and need to put in new contacts and maybe sensors. I wonder would you send on that engineers manual also?
Many thanks

altor · 02-10-2013 8:44pm

NotBored wrote: »

Hi, We also have the same problem. We replaced doors and windows and need to put in new contacts and maybe sensors. I wonder would you send on that engineers manual also?
Many thanks

Sent you that by P.M.

tester12 · 03-10-2013 6:54pm

Does anyone have a PDF for a HKC Securewave 1070 Install Manual please.

KoolKid · 03-10-2013 6:57pm

PMed you that manual.. Any bother give us a shout.

tester12 · 03-10-2013 7:26pm

Thanks for that everything grand.

pilotsnipes · 05-10-2013 11:27pm

I'm sorry I didn't see this thread at the start and made this request in another topic. My apologies..

I'm looking for the astec 63DV engineering manual if someone would be kind enough to forward on. Thank you if you are able to help.

KoolKid · 06-10-2013 3:37am

Sent you that.

pilotsnipes · 06-10-2013 9:46am

Koolkid - that was incredibly quick. Thank you very much.

KoolKid · 06-10-2013 11:17am

Your welcome. If you need any help with it you know where we are.

limerick1961 · 07-10-2013 9:37am

Hi First time here so hope im in the right place.

Im looking for a user manual for an Identifier Alarm circa I guess around 2000. See attached it has both beams and sensors and around 4o different contacts.

many thanks

J

KoolKid · 07-10-2013 9:44am

https://docs.google.com/file/d/0B6sJTuagSI_iOEVuOUZwYjRDX2s/
See if this one helps

jd6677 · 07-10-2013 5:40pm

Hi,

I'm looking for the full installation manual for a HKC Quantum 70 and Siemens SPC 4000 alarm please.

Thanks in advance,

JD

KoolKid · 07-10-2013 6:07pm

I PMed you them.
Happy reading.;)

Shadow42 · 08-10-2013 3:36pm

I also have Scopetronic Homeguard House Alarm. I changed battery but alarm will not reactivate. Is there a code to reset alarm

Manuals / Request a manual

Comments