Manuals / Request a manual

Pixelitis

Hi

I'm sure I saw a request on these boards before for this but I can't find it now.

I'm looking for the user manual for a Scopetronic homeguard alarm. Moved into new house and no manual available so don't know what half the readings mean.

If anybody could direct me to where I can get one it would be great.

Ta very much

Pix

dinefwr

The manual can be downloaded online from http://ukpanels.com

Jnealon

Here you go
Attachment not found.

meercat

dates lads

KoolKid

This has been requested as a sticky . I think this is a good idea.
Basicaly if you have a link to a user manual post it here.
If the manual you require is not here post a request & see if someone can help you.
Do not post links to any sites which charge & do not post up links for engineer manuals. (requesting an Engineer manual is fine)
If people want to exchange these by email thats up to them.
Please keep this thread on topic.If you wish to discuss anything else please start a new thread or post in a relevant thread.
Off topic posts may be deleted.

OK then lets get started.

Astec User Manual

Astec Fusion User Manual

Aritech CS350/CD34 User Manual

Aritech CS450 User Manual

Aritech CD72/95 User Manual

Premier 4/12 Master User Manual

Premier 48/88/168 User Manual

SigNET User Manual

HKC Securewatch Manager Manual

HKC Securewatch User Manual

HKC Securewatch Owners Manual

HKC Quantum 70 User Manual

Simon (Phonewatch Wireless) User Manual

Tim M-U

If anyone needs the hkc, bosch, honeywell or GE installation manual, pm me and ill send it to you!

KoolKid

A kind offer Tim.
I would say its best for people to request something & for the offer to follow.
I think the thread will be easier for a user to follow that way. Especially as it grows to a large number of pages.

By all means everyone feel free to link to any other manuals not listed above.

Tim M-U

makes sense!:rolleyes:

altor

HKC 10-70 USER MANUAL

GE SIMON USER MANUAL

GE SIMON XT USER MANUAL

CONCORD USER MANUAL

ARITECH CS250 USER MANUAL

ATS USER MANUAL

POWERMAX COMPLETE USER MANUAL

POWERMAX PLUS USER MANUAL

WISDOM USER MANUAL

SCOPETRONIC USER MANUAL

HKC Quantum 70 User Manual

Carlow52

http://elsevier.insidethecover.com/searchbook.jsp?isbn=9780750681674

[If not within forum rules please delete.]

It goes someway to explaining the different zone/user attributes etc as well as a useful guide on EN standard in the UK

Carlow52

Have the install and user ones.
Thanks

altor

Carlow52 wrote: »

Have the install and user ones.
Thanks

If you send me your email by pm i will send it on to you

IrishJoker

Looking for the Astec 63 Installation Manual - I'm in Engineer Mode but I've no idea what codes to put in.

Have posted the problem here http://www.boards.ie/vbulletin/showthread.php?p=67175194

Thanks

KoolKid

Sent you a PM.

IrishJoker

Much appreciated Thanks

ehealo

Tim M-U wrote: »

If anyone needs the hkc, bosch, honeywell or GE installation manual, pm me and ill send it to you!

How's it going Tim. Would you have an installation manual for the Premier Intruder Alarm system handy by any chance. I'm working for a properly registered company, and have recently taken over a premises with a premier alarm on it. Thanks. Enda.

Mr. G

ehealo wrote: »

How's it going Tim. Would you have an installation manual for the Premier Intruder Alarm system handy by any chance. I'm working for a properly registered company, and have recently taken over a premises with a premier alarm on it. Thanks. Enda.

What is the Model of the Alarm?

KoolKid

ehealo wrote: »

How's it going Tim. Would you have an installation manual for the Premier Intruder Alarm system handy by any chance. I'm working for a properly registered company, and have recently taken over a premises with a premier alarm on it. Thanks. Enda.

Sent you a PM;)

clauspj

IrishJoker wrote: »

Looking for the Astec 63 Installation Manual - I'm in Engineer Mode but I've no idea what codes to put in.

Have posted the problem here http://www.boards.ie/vbulletin/showthread.php?p=67175194

Thanks

Hi,

Just joined the board.

Trying to solve a few problems on a friends alarm (Astec 63DV), but need to do a factory reset to get rid of the existing engineer codes.

Can I get a copy of the installation manual as well?

Thanks a bunch!

/Claus

altor

clauspj wrote: »

Hi,

Just joined the board.

Trying to solve a few problems on a friends alarm (Astec 63DV), but need to do a factory reset to get rid of the existing engineer codes.

Can I get a copy of the installation manual as well?

Thanks a bunch!

/Claus

Send me your e-mail by P.M. and i will send it on to you.

clauspj

altor wrote: »

Send me your e-mail by P.M. and i will send it on to you.

Got it!

Again - thanks

/Claus

altor

Your welcome, always happy to help

Kenny Powers

Anyone have a Europlex Scopetronic Vista 5 engineers and user manual handy? Or know how I can reset and re-program it?

cjkhurst28

hi can someone give me the engineer manual for the astec 63d house alarm....thanks

altor

If you P.M. me your e-mail i will send it on to you.

daithihalton

Hi anyone have an installation manual for aritech cs350

KoolKid

I sent yo a PM.

dhall65

Hi KoolKid

My brother has an Aritech alarm system in his house. I'm not all that familiar with them. He has the disarm code, but he doesn't know the codes to full set or part set the system. Are these default codes or do I need to go into the menus to check it them?

If I could get the manuals, user and engineering, it would be handy for future troubleshooting. Would you be able to pass me on a link for the manuals please?

Thanks

dhall65

KoolKid

Hi & welcome to Boards.
I have moved your post to here. User manuals are in the first post of this thread. I will PM you a link for Engineer Manual.

dhall65

Ah cheers KoolKid, still finding my way round boards. Thanks for that.

KoolKid

No problem. If you need a hand you know where I am.:)

dunkelgrun

I'm looking for engineer codes for Astec 63DV Alarm. I'd be grateful if someone would send me a link.

altor

The defaulted codes are : factory code 4711 will disarm it and 1174 wil get you into engineer mode.

dunkelgrun

Thanks Altor. I already had the 1174 code and know it's Fn99 to exit. I was interested in what could be done in engineer mode. Is there an installation manual?

altor

Send me your email by P.M. and I will send it on to you.

coleyb1979

Could anyone send me an engineer manual for an astec 63 alarm please? Thanks in advance...

altor

Send me your email by P.M. and I will send it on to you.

worded

We have this Alarm. We moved in here and no one knew the code.

I pulled the fuse in the control panel a few months ago to stop it ringing when it was accidentally set off.

Anyone know how to reset it? Is it a case of RTFM?

Would like to get it working again.

Thanks.

KoolKid

Depending on how old it is
Is there a factory link near the centre of the board marked LK 1
If there is a second board plugged on top of the main PCB there may also be a link on that also.
Remove both links & power up the system.Try disarm with 04567
If that works Try 01234 as the engineer code.

altor

worded wrote: »

We have this Alarm. We moved in here and no one knew the code.

I pulled the fuse in the control panel a few months ago to stop it ringing when it was accidentally set off.

Anyone know how to reset it? Is it a case of RTFM?

Would like to get it working again.

Thanks.

If you need a installation manual off this panel send me your e-mail by P.M.

goan

I have just joined and noticed somebody was looking for the manuals. I tried ukpanels.com but the site is blocked for that particular manual.
I am replacing my windows and need to disengage the sensors on the windows. I have the engineers code but I don't know how to use it. And after removing the sensors how do I re-install the system?
Thanks for any help in this.

goan

Has anybody got the installation manual for the Scoptronic Homeguard Alarm System?
Or else can anybody tell me how to disengage the system as I am replacing my windows and need to remove all the sensors from the windows. I need to put them back on again on the new windows.
I have he engineer's code but not sure how to use it.
Any help gratefully received.
Thanks

altor

If you send me your e-mail by P.M. I will send it on to you.

KoolKid

Simply enter the engineer code. A small C will show on the screen.
Leave in that mode while you work on the windows.
Enter 38* to display open zones.
Enter 0* to leave engineer mode.

altor

goan wrote: »

I have just joined and noticed somebody was looking for the manuals. I tried ukpanels.com but the site is blocked for that particular manual.
I am replacing my windows and need to disengage the sensors on the windows. I have the engineers code but I don't know how to use it. And after removing the sensors how do I re-install the system?
Thanks for any help in this.

If you want to enter engineering enter the engineer code. To exit press 0* when C is displayed. It is described on page 6 of the engineer manual.

goan

Thanks Altor and Koolkid.
That was fanatastic help from you.
I never knew Boards was such a great site - discovered it by pure accident.

KoolKid

Glad we could help. If you need anything you know where we are.

altor

goan wrote: »

Thanks Altor and Koolkid.
That was fanatastic help from you.
I never knew Boards was such a great site - discovered it by pure accident.

Your welcome, we are always happy to help

ifah

Hi all,

Can anyone send me the Engineers manual for the Astec 63DV please ?

Thanks.

altor

If you P.M. me your e-mail I will send it on to you.

KoolKid

ifah wrote: »

Hi all,

Can anyone send me the Engineers manual for the Astec 63DV please ?

Thanks.

Sent you a PM.