Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum
Private Group for paid up members of Boards.ie. Join the club.
Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026
www.HobbyAirsoft.ie (dublin)
Comments
-
-
Summer Clear out
Right lads, it's that time you love most - the time of year where we're getting too busy, and need to clear out some bits and pieces at low prices, with simple fixes
4x KJW Sig P229 @ €90 each!
The pistols here venting gas after a number of shots; this is normally a combination of loading nozzle & cool down. We just don't have the time to give them unfortunately
But it's good news for you!
We also have one KWA SP2022, without magazine, FUBAR'd - ideal for parts.
Only €20!
As always this gear is sold as seen, without warranty, and is strictly first come first served.
0 -
-
-
-
Advertisement
-
threw the h hop into the F2000, must say very impressive, was a bit windy so it strayed of a little but when the wind calmed down every now and again the BB's flew straight as an arrow now to test it in the M4.
Thanks again 0 -
-
-
-
-
Advertisement
-
AWS Raptor MOSFET
The Raptor FET from AWS is the most advanced MOSFET on the market for a V2 gearbox, and offers unparalleled features all from a self contained unit held in the gearbox! This unit occupies NO additional space in the stock tube or handguard!
€100!
Features include perfect 3 round burst (it counts how many times the cut off lever hits the MOSFET; no timing!), full cycle completion (every shot returns the piston to starting point), semi pre-cocking (piston is locked back to 70% for instant trigger response), battery monitoring for Lipo batteries, ROF control (full or half speed), Active braking etc
These are due back in late this week, or early next. These are the last EVER Raptor FET's from AWS, and they are moving quickly. There is already a growing reserve list! If you would like us to set aside a couple for you, just let us know and I'll stick you on the list.
We cannot hold these indefinitely - so please keep in contact with us, and let us know if you no longer want them.
Please Note: AWS are no longer trading, and this is the last EVER batch of Raptor MOSFET's. As such these MOSFET's no longer come with a year's warranty.0 -
-
Private Snafu wrote: »Howaya Kev
Any chance you could stick a raptor aside for me, can't remember if I said it to you yesterday.
Luca
Done and Done, Luca!0 -
-
King John The Last wrote: »Hey, could you get one of these in and how much would it cost? http://www.airsofttaiwan.com/goods.php?id=488
Can't get the KJW GBBR's in at the moment, sorry about that!
At the moment we don't do any of the GBBR's...however, that may be changing in the near future. Stay tuned for more info
0 -
-
-
-
-
-
Advertisement
-
-
-
-
-
Hi, got a body for Mauser Pro Tac which should do you.Don't have the folding stock bodyWar Machine 539 wrote: »Hi, I am looking for a replacement stock/body for an ASG/Well L96, to be specific, this one here:
http://www.gunnerairsoft.com/store/index.php?route=product/product&product_id=454
I was told you guys may have one in a parts bin? If so could you let me know? Replacement bodies for this are a pain to come by, and the one with the monopod is just oooh lala!
0 -
-
-
-
garreth1995 wrote: »Hi kev do you have g&g hop up rubber instock
None left - the last 3 were picked up by a customer on Fri/Sat; SHS white hop up rubbers are in though 0 -
Advertisement
-
Advertisement