Case Mod's

dubdvd · 18-06-2005 10:27AM

very nice prosta: you have a good hand to be able to pull that off

the picute i mean....so so good i love jim fizpatrick and his pics look even better on your pc ....great job ...you could make a few bob doing this on the side ...i'd say there is a few people here on boards that would be interested in paying you to do this on their pc's ..just an idea ....did it take long to do ??????

Prosta · 21-06-2005 09:40AM

It took a day and a half. Sat out in the nice weather the weekend before last and got it done in a couple of sittings.
If anyone wants anything done then let me know.
I can fit an a4 pic onto a panel.
It has to be a drawing rather then painted art.
It should take a week max. We can discuss the price

Prosta · 01-07-2005 09:33PM

I put some Elwire on the front panel.
Needs a little adjustment. Have some green leds. Will swap out the blue ones to see how it looks since I'm on a mostly green theme

p160f8yk.md.jpg

dubdvd · 19-07-2005 11:59PM

thats a sweet rig ...prosta i love the EL neon sting ....very sweet ........

I know ive posted this rig before , but i thought i'd post some pic's of it now before i go to work on it ..as it will kinda be a before and after thing cant tell to much about was going to happen to this rig till its finished but watch this spot as this is going to be the likes never seen before on boards or in the modding community in ireland " i hope

"...so watch this spot i thought i better get a start on it before WiZzard gets in there before me with his project

...these are done when i took out the WCing to mod it so it not to hot inside .....

BEFORE

http://tinypic.com/95rjvb.jpg
http://tinypic.com/95rjfb.jpg
http://tinypic.com/95rjm8.jpg
http://tinypic.com/95rk3q.jpg
http://tinypic.com/95rkia.jpg

dubdvd · 03-08-2005 08:03PM

THE START OF MY NEW PROJECT ILL POST MORE PICS AS IT GOES ON

WizZard · 03-08-2005 08:11PM

Very nice dub. Well done.

I need to get my skates on

g5hn710m4xpdwy · 03-08-2005 08:16PM

very very nice indeed!

Sparky · 03-08-2005 08:21PM

looking really good dub, you certainly set a benchmark when it comes to modding

masteroftherealm · 03-08-2005 08:25PM

Nice to see everythings going to plan dude!!

Nukem · 03-08-2005 09:02PM

Very tasty

dubdvd · 03-08-2005 09:39PM

Lots more to come thats just a taster the plan is to get some gas sturts the kind you see on the boot of a can that hold it up tomorrow so insteed of just screwing it on it will lift up and show of all the goodies inside ...mmmm there lots of goodies lol...i cant say to much foe now ssssshhhhhh

ps this has a lot still to be done to it apart from the sturts ..ive still to place the buttons from the tft into the side panel

gline · 03-08-2005 10:46PM

well the front of the pc is bright anyway, no need for lighting in the room, lol

Sparky · 03-08-2005 11:43PM

dubdvd wrote:

Lots more to come thats just a taster the plan is to get some gas sturts the kind you see on the boot of a can that hold it up tomorrow so insteed of just screwing it on it will lift up and show of all the goodies inside ...mmmm there lots of goodies lol...i cant say to much foe now ssssshhhhhh

ps this has a lot still to be done to it apart from the sturts ..ive still to place the buttons from the tft into the side panel

you are definatly, an inspiration, nice ideas aswell, do you plan on showcasing your setup at any events?

dubdvd · 03-08-2005 11:45PM

heres a hint of whats to come

dubdvd · 04-08-2005 12:14AM

Try guess where that second tft above will be going ??????????????????????????????????? This 5" T.V. will be a lot easy to guess where this is going to end up ....ahhem "drive bay" ahhem...Thats eoungh hints of whats to come so far

I love scrapheap challenge... i could'nt miss it ..lol..

Sparky · 04-08-2005 08:56AM

dubdvd wrote:

Try guess where that second tft above will be going ??????????????????????????????????? This 5" T.V. will be a lot easy to guess where this is going to end up ....ahhem "drive bay" ahhem...Thats eoungh hints of whats to come so far I love scrapheap challenge... i could'nt miss it ..lol..

:eek: wow, now your surpassing yourself,

dubdvd · 04-08-2005 07:26PM

well i got the sturts today hopefully i get a chance to put them on tomorrow

there about an inch or two too big but ive an idea how to sort this out ..i got them for 15 euro in a scarpyard not bad ah they are of the boot of a starlet

kookie · 04-08-2005 08:40PM

Its unklerosco here, to lazy to log off my sisters id..

U are fappin insane, more insane than the crazy man down the road from me who ate his feet!!!! Must call over n drop that PSU gear to u... Pm me if u around this weekend..

dubdvd · 04-08-2005 10:57PM

Ok Then Kookie Chicken "kisses" LOL

Sparky · 04-08-2005 11:22PM

so dub, when do you plan on showcasing your fine creation.

dubdvd · 05-08-2005 10:26AM

it will be a while before this project will be finished as there is tons of work to be done on it the watercooling set-up is to be a totally fresh idea i have most if not all of the parts and stuff here but as ive said before im badly stuck for a couple of things ...No:1 some UV yellow or green plexy...No:2 a motor to place under the case that will work in a way that when i press a button one of the TFT's will face me and then press again and the front panel with all the drive bays will face you .and the same with the back of the case all the external wiring will be wired through the base of the case and down and out in a way that no matter how many time the case spins around they wont get tangled up...

I'm hoping to have it as a treble dispaly if not it will be a double ..if its 3 tft's ive got it worked out how it will be but with the double im still working on the best way ...when its finished it will displayed in the likes of custompc and pcextreme mags "hopefully " and maybe on a boards.ie lol..
if it turns out the way i hope it will i'd galdy display it at any of the LAN's around the country "if i was asked and if it was good eoungh ?????"
it has all be recorded step by step with photos ..So maybe it will be on some website as a set of How To's..but as i said only if it turns out the way i hope it will ...

Gone West · 05-08-2005 01:20PM

Actually dub, you dont go to lan partys do you?
Because I know myself, a great casemod is infinetly more impressive when you see it in person.
/me packs up fuzzy case for d0rkside.

dubdvd · 05-08-2005 03:09PM

No i dont get to LAN's ..Thats only cos im like a sniper and like to frag from a distance ...lol...:cool:

Sparky · 05-08-2005 06:42PM

dubdvd wrote:

it will be a while before this project will be finished as there is tons of work to be done on it the watercooling set-up is to be a totally fresh idea i have most if not all of the parts and stuff here but as ive said before im badly stuck for a couple of things ...No:1 some UV yellow or green plexy...No:2 a motor to place under the case that will work in a way that when i press a button one of the TFT's will face me and then press again and the front panel with all the drive bays will face you .and the same with the back of the case all the external wiring will be wired through the base of the case and down and out in a way that no matter how many time the case spins around they wont get tangled up...

I'm hoping to have it as a treble dispaly if not it will be a double ..if its 3 tft's ive got it worked out how it will be but with the double im still working on the best way ...when its finished it will displayed in the likes of custompc and pcextreme mags "hopefully " and maybe on a boards.ie lol..
if it turns out the way i hope it will i'd galdy display it at any of the LAN's around the country "if i was asked and if it was good eoungh ?????"
it has all be recorded step by step with photos ..So maybe it will be on some website as a set of How To's..but as i said only if it turns out the way i hope it will ...

It would be great if they done a tv program about pc modding, but if you decide to get it in a mag, i can say "i seen this before it was here"

Good ideas, keep up the good work.

Prosta · 08-08-2005 09:18AM

kookie wrote:

Its unklerosco here, to lazy to log off my sisters id..

U are fappin insane, more insane than the crazy man down the road from me who ate his feet!!!!

Met Dub when he was picking up some stuff for Unklerosco and got some of the details for this megamod. I was thinking what Unk said above. :eek:

Good to see your making progress Dub - Good luck with the rest of it.

dubdvd · 10-08-2005 05:29PM

A small up date the pics speak for themselfs ive used the old 120mm fan grill as a holding frame for the lcd itself the rest of the TV in placed inside the case in behind the fan hole cut out and i used the wires which where conected to where the batteries go and i hooked it up to a molex :eek: so its powered from my PSU ...The controller for the volume and channels and so on will be place beside the 17" tft at the side of the case made into the plexy ...but ive also got a remote control so i wont have to be messing with ...my NTL box is near the PC so ill hook it up to it for all the channels ...and ive got a speaker made into the pc which you can see in the last photo .This was taken from my 19" TFT and it fits perfect on the top of the case .btw i have no aerial connected to it yet thats why its so grainy

dubdvd · 10-08-2005 05:44PM

jozi · 10-08-2005 05:58PM

Pretty Neat that

Nukem · 10-08-2005 06:05PM

Is that Charlie & the Chocolate factory. Thats not out yet

Sweet mod. guess you got that cable working ok.

Nukem

dubdvd · 10-08-2005 06:14PM

Nukem wrote:

Is that Charlie & the Chocolate factory. Thats not out yet
Sweet mod. guess you got that cable working ok.

Nukem

Thats on the telly "honest i dont want INFACT at my door "again";) ...YES i just kept the small cable and put my head into overdriver to find away around the problem and 5 days later after banging my head of the wall i came up with one :rolleyes: ..

Case Mod's

Comments