Which brand of plug sockets to buy.

kabakuyu · 20-07-2023 12:07PM #1

I need to replace a few double sockets, can anyone recommend a good brand, I am bamboozled by the choice on screwfix.RECI will be doing work but i cant contact him at the moment.

horseman34 · 20-07-2023 12:22PM

Stay away from lap, I think mk do the job quite nicely

10-10-20 · 20-07-2023 12:28PM

Going beyond screwfix for a moment, your local electrical wholesaler will have a good selection of brands and finishes and at better prices than Screwfix. They all typically stock Schneider, MK, Nexus, Deta... selection is almost endless. Common wholesalers are: Eurosales, Kellehers, EWL, Wesco... and they typically have display modules available.

21-07-2023 03:29PM

personally I like the MK Logic plus range.

Also available with USB A and USB C outlets on double sockets.

Hotblack Desiato · 21-07-2023 04:31PM

MK all the way. The BG stuff in B&Q is total rubbish and only slightly cheaper. Had the switches on a double socket fail after only a couple of years, had a horrible stiff action even when new.

kirk. · 21-07-2023 04:55PM

https://www.boards.ie/discussion/comment/120880591#Comment_120880591

I would avoid USB sockets

Each to their own I guess

Hotblack Desiato · 21-07-2023 05:04PM

The thing I've never been able to find out about USB sockets is how much power they use when not in use. A small amount surely, but not nothing either.

Also the idea of having a wee bit of no-name Chinese electronics on a 32A MCB does not fill me with joy.

kirk. · 21-07-2023 05:31PM

Aside from incorporating electronics into a socket outlet which I think is a bad idea

I haven't seen too many issues with cheap sockets

21-07-2023 06:54PM

https://www.boards.ie/discussion/comment/120880984#Comment_120880984

They don’t consume any power when switched off using the switch on the socket outlet.

10-10-20 · 22-07-2023 09:43AM

Which brands offer this @2011, I've yet to see any which allow the USB to be isolated by the physical switch?

22-07-2023 10:18AM

MK

10-10-20 · 22-07-2023 11:25AM

https://www.boards.ie/discussion/comment/120882315#Comment_120882315

ok thanks, must look at them. It wasnt an option on MK when i installed some 3 years back.

22-07-2023 11:54AM

https://www.boards.ie/discussion/comment/120882545#Comment_120882545

You are making me doubt myself now! I will test the isolation theory out when I get back home. I’m abroad at the moment. Will update you on this thread.

kirk. · 22-07-2023 12:00PM

I'd hazard a guess they're separate

Wouldn't make a whole lot of sense switching off USB with appliance

You'd have people switching appliance back on to use the USB

I thought electronics these days could auto detect a load or cable even

10-10-20 · 22-07-2023 12:34PM

They can Kirk, but you still have to power that circuitry, and that becomes the vampire load. 0.05W is what some units draw when in low-power mode.

@2011, MK do have a new range of sockets called the Connected Power series and they are specifically targeted at large commercial installations where monitoring and management at the socket is required and these do feature an internal isolation switch for the internal electronics for use during periodic testing. Efixx did a pres on them a couple of weeks ago:

https://www.youtube.com/watch?v=1w3Xb76DHj4

But as for general USB sockets, I'm not sure that they have the isolation at-the-switch built-in.

10-10-20 · 22-07-2023 12:36PM

And further on the off-topic topic of USB sockets... 😁

https://www.electricalsafetyfirst.org.uk/professional-resources/technical-e-news/investigation-into-uk-socket-outlets-incorporating-usb-charging-points/

...some of the cheaper brands are really shyte.

kirk. · 22-07-2023 12:55PM

https://www.boards.ie/discussion/comment/120882757#Comment_120882757

I think i realized my mistake on auto detect as i was posting 😁

22-07-2023 04:56PM

Very nice:

https://buildings.honeywell.com/content/dam/hbtbt/en/documents/document-lists/mk-electric/gb_brochures/MK-USB-Charging-Solutions-brochure_UKMK446-0321-EN.pdf

10-10-20 · 22-07-2023 08:46PM

https://www.boards.ie/discussion/comment/120883766#Comment_120883766

Interesting. Seems that the USB isn't isolated by the switches in this range, but I'm confused by this part:

I think that the text is talking about the modular USB charger (hotel type install jobbie) and not the integrated USB device within the socket... not sure. Can't see a way to isolate the USB part otherwise...

kirk. · 22-07-2023 09:11PM

Could mean you disconnect the socket before testing

Don't know why anyone would bother with them

23-07-2023 05:44AM

https://www.boards.ie/discussion/comment/120884565#Comment_120884565

I’m not so sure, see this part:

On second thoughts this is just to prevent an open neutral on the LV outlets.

kirk. · 23-07-2023 06:46AM

I doubt any USB sockets will switch off USB at socket

Doesn't seem logical to me switching on/off appliance with usb. If it did they would already be manufactured that way

astrofool · 23-07-2023 09:58AM

I haven't seen any that do that, have a few brand's, mostly BG and MK (MK are the better quality and an easier install, but haven't had any issues with BG yet, going on 4-5 years).

Everything bar the plugs I buy is MK.

23-07-2023 10:06AM

I’ve both MK and more designer ones by Legrand and both are excellent. I wouldn’t use cheap sockets. It’s just not worth it and for the white simple plastic ones, MK Logic is consistently good quality.

kirk. · 23-07-2023 04:28PM

https://www.boards.ie/discussion/comment/120885685#Comment_120885685

Cheap sockets don't give much trouble in normal use ime , no doubt mk is better quality

I'm not sold on the idea of electronics incorporated into sockets

Issues with testing them and then of course the ever changing charging technology. There's probably different opinions on them

23-07-2023 05:31PM

A bit like cheap tyres. Simple devices but something you’re probably better off not skimping on..

I don’t see the point of incorporating USB chargers anyway. It doesn’t add much convenience.

Simple and solid!

24-07-2023 10:27AM

https://www.boards.ie/discussion/comment/120887572#Comment_120887572

Using high quality USB sockets such as MK reduces fire risk IMHO. There is no end of articles on the internet about fires caused by poor quality USB chargers. We don’t use plug in USB chargers in our home for that reason.

The link above illustrates the safety features built in to the high quality MK USB outlets.

I have noticed that most new homes have USB outlets fitted as standard I believe this is now the norm and homes / coffee shops / offices / airports etc. without these will soon be less common. There is always some resistance to change but eventually everyone gets onboard. Move with the times or get left behind.

24-07-2023 11:46AM

I just don't use poor quality USB chargers.

The other issue is that most of those sockets are USB-A which is rapidly becoming obsolete and replaced by USB-C

Speaking of which, I was shocked (pardon the pun) at the cost of some of those in France. I was upgrading a few around a holiday home. €59 for a USB-C + single socket with a decent bit of design from Legrand and over 60 quid for a double plate with no USB.

That yoke was almost €60 ! https://www.youtube.com/watch?v=yrJEHMgXHi8 (they've a flat plate that covers the recess until you push in a plug but even so .. pricy! I thought Irish prices were steep...)

EU fixed cable colours are completely ignored over there too, which is surprising. Still red (Live) + blue + green/yellow.

kirk. · 24-07-2023 12:00PM

I would argue it's a matter of choice on domestic sockets which I assume is what we are dicussing

Same safety principle applies to high quality separate chargers as high quality USB sockets

The separates can also easily upgrade with the new charging technologies

Basic USB outlets will be prevalent lots of places , commercial etc for obvious reasons

Doesn't mean theres a need to fit them on domestic work for high value items with separate chargers

24-07-2023 12:09PM

They make sense in places like airports and cafes where people might be arriving with chargers from other countries with different pins. It certainly saves on adaptors.

Most USB C wall plates cannot provide full power for a laptop for example or even do rapid charging for a mobile, so it's still not that much use for a lot of devices.

If you consider say my MacBook Pro adaptor it can deliver: 4.7 amps at 20.5V, or 3amps at 15V, 9V or 5.2V.

An MK USB C Socket is limited to 5.2V at 3amps.

For example, if you want to get a quick charge boost for a phone, you're much better off plugging in an original Apple or Samsung charger etc, rather than using a 3rd party USB-C socket and USB A is way too slow.

One of the most sensible designs I've seen (despite all the moaning about Apple and proprietary connectors on the end of iPhones) is Apple's USB-C laptop charger.

It's a compact power USB-C brick, with a 'duck head' connector on the mains side. So you can snap on a UK/Ireland plug, a continental CEE 7 plug, a US NEMA plug, Aussi plug, Chinese plug etc etc or just push in any IEC 'figure of 8' power cord. Extremely handy when travelling and those heads fit all of their chargers.

10-10-20 · 24-07-2023 12:17PM

https://www.boards.ie/discussion/comment/120890200#Comment_120890200

They pretty much can ignore the L and N wiring in sockets over there as the plugs are reversible anyway, so there is no polarisation in that respect.

Which brand of plug sockets to buy.

Comments