Detailing chat

vectra

I only gave the Passat a cleanser polish first, then carpro erasor prior to cquk.
you should be safe enough with that.
But again, I wouldnt bother again.

MuddyDog

What's the best alloy wheel cleaning spray that I can get? Want something that sprays on and helps detar it/remove fallout from it.

Same goes for the body work. Something to help detar/remove fallout/those little small black dots from the paintwork.

Lastly, best spray for instant tyre dressing to make the rubber look fresh and shiny?

heroics

MuddyDog wrote: »

What's the best alloy wheel cleaning spray that I can get? Want something that sprays on and helps detar it/remove fallout from it.

Same goes for the body work. Something to help detar/remove fallout/those little small black dots from the paintwork.

Lastly, best spray for instant tyre dressing to make the rubber look fresh and shiny?

Bilt Hamber Auto wheel is what I use for my alloys. https://www.bilthamber.com/auto-wheel

MetzgerMeister

I've been using Bilt Hamber Auto Wheel for the past 5 years and I will never use anything else again. It's touchless cleaning for alloys which is great when you have multi-spoke wheels. BH have a very good fallout remover called Korrosol which I also use.

Tar remover - I use Gtechniq W7. Another very good one is CarPro TarX which smells much better that W7.

For tyre dressing I use Meguiars Hot Shine Reflect. It's in an aerosol can, is very fast to apply and gives a superb, long lasting shine.

DaveyDave

DaveyDave wrote: »

Right I'm fed up of how streaky my windscreen looks, any recommendations for a polish or something? Claying doesn't seem to really help it, it just helped it look less bad.

Still looking for suggestions on the windscreen. It's as if the snowfoam has dried into the screen and left streaks which are visible when the wipers are on, I also believe this may be the case as there's a clear patch where the passenger wiper would be up when cleaning.

It can be quite distracting with oncoming headlights in the Winter darkness. It doesn't seem to be as noticeable when it's a heavier rain. It also seems to be messing with the rain sensor as it's usually on 3-4, but even on 1 it goes too fast in a light drizzle.

AG Fast Glass doesn't seem to help, it seems to dry in when sprayed on. Maybe something like CarPro Ceriglass? Anything to buff off whatever seems to be in the windscreen.

MetzgerMeister

Get the CarPro CeriGlass kit. It has the polish and a nice microfibre cloth but most importantly it has a rayon polishing block. The last time I used it was on the car pictured below to remove film that wouldn't budge with washing or claying and it worked a treat:

milhous

Does everybody wash their own car here all the time.?Do they trust any car wash (machines in garages or people at a car wash)? I like my car being clean but these days it needs a wash every week to look good.

I've never had it waxed or detailed and it seems like a lot of work and research (for someone like me who doesn't even clean their own car).

Would love to have it like I bought it, the water sitting on it in pretty bubbles. Is that sustainable?

MetzgerMeister

I wash mine every 2 weeks. I've had 8 cars and not once has anyone else washed any of them.

I don't trust machines because the rollers cause damage to the paint and I don't trust people at a car wash either because they either use brushes or don't pay enough attention per car as they are about volume.

The water bubbles (beading) is sustainable by doing the job yourself. After a was, give the car a coat of a product containing Si02 such as Gtechniq C2V3, Gtechniq QD, CarPro Hydr02 Lite, Bilt Hamber Auto-QD etc. If you don't want to buff the product, CarPro Hydro2 can be sprayed on and then power washed to give the desired effect.

milhous

When some car washes offer waxing is that the same. Tbh I'd rather pay someone a few quid to do it. And do it right. Does washing your car constantly (mine is racing red) let it fade faster or is the colour degradation just due to sun light?

Know of anyone in the northeast that will apply such stuff for the beading effect?

MetzgerMeister

Car wash wax is rubbish. It's sprayed on and off you go. It can stain trim, leaves film on windows and doesn't last very long.

Keeping a car clean and protected stops the paint fading.

I don't personally know anyone in that direction but Spirit Detailing are in Kildare and 5 Star Auto are in Dublin.

EPAndlee

A dealer washed one of my cars once, that was the only time anyone else washed my car. I don't trust any of those car washes, rather do it myself

punisher5112

EPAndlee wrote: »

A dealer washed one of my cars once, that was the only time anyone else washed my car. I don't trust any of those car washes, rather do it myself

With a yard brush....

vectra

milhous wrote: »

Does everybody wash their own car here all the time.?Do they trust any car wash (machines in garages or people at a car wash)? I like my car being clean but these days it needs a wash every week to look good.

I've never had it waxed or detailed and it seems like a lot of work and research (for someone like me who doesn't even clean their own car).

Would love to have it like I bought it, the water sitting on it in pretty bubbles. Is that sustainable?

milhous wrote: »

When some car washes offer waxing is that the same. Tbh I'd rather pay someone a few quid to do it. And do it right. Does washing your car constantly (mine is racing red) let it fade faster or is the colour degradation just due to sun light?

Know of anyone in the northeast that will apply such stuff for the beading effect?

I always wash my own car.
The only time it doesnt get washed properly is if the weather is too bad, I would take it to my local jetwash and just rinse it down with clear water.

You could spend a Saturday or some day and do a job on your own car reasonably enough!
What county exactly are you ?

milhous

vectra wrote: »

I always wash my own car.
The only time it doesnt get washed properly is if the weather is too bad, I would take it to my local jetwash and just rinse it down with clear water.

You could spend a Saturday or some day and do a job on your own car reasonably enough!
What county exactly are you ?

I'm in Louth but regularly yh be in Dublin. If it was a day job it'd be fine. If I saw someone go though the process id prob be happy enough to belt away but not knowing a thing I'm not gonna start playing around I don't think.

markc1184

I've used Flawless Detailing in Drogheda plenty in the past. It can be pricey but always a top notch job.

Try and do it myself as often as I can.

vectra

milhous wrote: »

I'm in Louth but regularly yh be in Dublin. If it was a day job it'd be fine. If I saw someone go though the process id prob be happy enough to belt away but not knowing a thing I'm not gonna start playing around I don't think.

No part of it is difficult nor hard to understand,
Preperation is only glorified cleaning, Then apply a coat or two of whichever wax/sealant you choose.

EPAndlee

If you were going to tackle it yourself I'd use CarPro Hydr02 as it's very easy to use, just spray on and rinse off

milhous

I'm going to head for flawless detailing in drogheda I think. Thanks for your replies. I suppose it'd be a waste when it's lashing out like today?

markc1184

Where is the best place to buy Fusso light in Ireland? Preferably looking to have it delivered before the weekend.

EPAndlee

markc1184 wrote: »

Where is the best place to buy Fusso light in Ireland? Preferably looking to have it delivered before the weekend.

Autopia is the only place I've seen that sells Soft99

vectra

EPAndlee wrote: »

Autopia is the only place I've seen that sells Soft99

Autopia
Blok51 in the north with exceptionally fast delivery service.

Fusso light topped with a coat of Kiwami Extreme gloss.

acri

Hi all. Let me preface this by saying I am a moron. Plain and simple.

A few days ago I decided to wax the car with Simoniz Original Wax. Thought it might be a good idea before the poor weather really kicked in. However, I applied a coat to far too large of an area and I simply can't buff it out. So now the rear third of my car is covered in a thin swirly coat of hardened wax, save for a small patch on the boot. So much shame.

So, is there a simple solution to removing the wax, or am I at the mercy of a professional? Cheers.

MetzgerMeister

Your options are:

- Apply a thin coat of the same wax on top of the area, a small section at a time and buff when it's ready. This should remove the stain.

- Use a product like CarPro Eraser or Gtechniq Panel Wipe and buff with an MF cloth. Keep doing this until the stain is gone. These products are made to break down wax, grease etc on a car's paint.

- Sell the car and forget about it

- Set the car alight

Personally I'd try one of the first 2 as the others are a bit OTT :pac:

acri

MetzgerMeister wrote: »

Your options are:
...

Thank you kindly, sir. Time to wear the elbows out.

vectra

Option one above is well suggested.
Go lightly though
Remember
the more you apply the more you need to buff off.

Murt102

Lads what is the best wheel cleaner to use for an alloy that is caked with brake dust?

I have a decent wheel cleaner that I find brilliant (cant remember the name of it now) but it isn’t doing anything for the alloy.

Also got a rough cleaning pad from the kitchen (one of those yellow ones with the green back, couldn’t give a sh1te about scratching the alloys they are old ones anyways) but could only get the bare minimum off.

Also gave it a dose of Korrosol and no joy.

Any other suggestions?

Foxhole Norman

Korrosol will work, but it would take too long. I'd recommend an acid based wheel cleaner, followed by a thorough clean with a pH Neutral cleaner to remove any traces of the acid. Acid is generally bad to use around any parts of the car but it is good to have in some instances, this would be one.

MetzgerMeister

It's possible that the brake dust has actually become part of the paint due to being on so long. Only option there is a refurb.

slave1

Lads, between the hose ban and putting my back out I haven't touched the car since early last year and it's Spring complete detail/wax etc.
I'm itching to get out on any kind of mild day but at what temperature would I need it to be for the wax (Collinite) to work it's way in properly?

MetzgerMeister

I found that on colder days wax gets very bitty and doesn't buff off all that easily. Better idea is to use a spray and buff sealant for now until the weather gets warmer. Plus the fact that dew comes down early enough and the moisture in the air it can take a lot longer for it to haze and becomes a nightmare to try and buff if you leave it too late.

Products like CarPro Hydro2 Lite, Gtechniq C2V3, Gtechniq QD, Bilt Hamber Auto QD etc. are your friends in cold weather.