The "Today I did something to my bike" thread

Sonics2k

Jaysus D3V!L, haven't you had problems with your last GS?

It's bloody awful to see happen with such an amazing looking (and expensive) bike.

D3V!L

Sonics2k wrote: »

Jaysus D3V!L, haven't you had problems with your last GS?

It's bloody awful to see happen with such an amazing looking (and expensive) bike.

Last one was grand, well apart from the back wheel needing replacing. Oh and BMW themselves damaging it when it was recovered to Cork for an engine knocking.

So , no problems :pac:

Walking is great for your health isn't it , might start that instead

blade1

D3V!L wrote: »

No, no I haven't. Only bikes I've had no problems in my 20 years on them have been Jap machines. Might go that way in the future. The GS is my daily driver. I'm a key worker and I need to be mobile at the drop of a hat. So reliability is key.

I'm hoping thats a grease mark.

You should have kept the ZZR1400.
That was over 10 years ago yeah?

D3V!L

blade1 wrote: »

You should have kept the ZZR1400.
That was over 10 years ago yeah?

Yep., you've a great memory. Faultless machine, took me across Europe in -20 Celsius temps in the height of winter without issues.

I don't think my back would last long on one these days though.

Sonics2k

D3V!L wrote: »

Last one was grand, well apart from the back wheel needing replacing. Oh and BMW themselves damaging it when it was recovered to Cork for an engine knocking.

So , no problems :pac:

Walking is great for your health isn't it , might start that instead

Just don't start cycling! :pac::pac:

D3V!L

Sonics2k wrote: »

Just don't start cycling! :pac::pac:

blade1

blade1 wrote: »

Got swingarm removal adaptors for my abba stand.
They bolt into your front foot hanger bracket.
Very handy to have.
There's also an arm and strap you can get which allows you have the bike in front wheel or both wheels off the ground positions.
You can then have both wheels, swingarm and front forks off the bike all at one time.
Think I'll purchase.

So the kit arrived for lifting the front.

The Verdict..... It takes a bit of effort to push down the back of the bike and tighten the strap at the same time.
I'll have to try it on my ZZR to see is it manageable on a big bike.
Maybe it's only a problem when using the swingarm removal adaptors as this means the pivot of the bike is a little further back.

Two wheels off the ground on my Tuono


Is the dolly the next step? hmmm

https://www.youtube.com/watch?v=uvGOg1gKfrU

LollipopJimmy

That looks the job. I need a workspace, my front garden isn't cutting it.

Today I wired in the heated grips and made a neat job of the wiring. I had wanted to source power from somewhere other then going directly to battery then decided I wasn't arsed and I'd trust the grips to switch themselves off if I forget to.

Refreshed the brake fluid too, front not a bother apart from the screws on the reservoir being rung, some donkey bet them in with the wrong size screwdriver, i had to re-use them but they'll be replaced over the next week. Then the bleed nipple on the rear caliper sheered off, felt cross threaded when I opened it and i just went with it, when I closed it off the last time and announcing 'job done' it came off. It sheered but in the closed position so brake is functioning but will be replaced in the next day or so. Drilling it out will be tremendous fun.

I'll rebuild the whole caliper and change the pads while it's off. Might do the same with the fronts while I'm at it, rebuilding calipers is such a satisfying job

listermint

LollipopJimmy wrote: »

That looks the job. I need a workspace, my front garden isn't cutting it.

Today I wired in the heated grips and made a neat job of the wiring. I had wanted to source power from somewhere other then going directly to battery then decided I wasn't arsed and I'd trust the grips to switch themselves off if I forget to.

Refreshed the brake fluid too, front not a bother apart from the screws on the reservoir being rung, some donkey bet them in with the wrong size screwdriver, i had to re-use them but they'll be replaced over the next week. Then the bleed nipple on the rear caliper sheered off, felt cross threaded when I opened it and i just went with it, when I closed it off the last time and announcing 'job done' it came off. It sheered but in the closed position so brake is functioning but will be replaced in the next day or so. Drilling it out will be tremendous fun.

I'll rebuild the whole caliper and change the pads while it's off. Might do the same with the fronts while I'm at it, rebuilding calipers is such a satisfying job

Get someone to tack a bolt head on it. Come off in a second. Screwing be a pain in the hole

CJhaughey

LollipopJimmy wrote: »

Refreshed the brake fluid too, front not a bother apart from the screws on the reservoir being rung, some donkey bet them in with the wrong size screwdriver, i had to re-use them but they'll be replaced over the next week

Do yourself a favour and invest in a Vessel Impacta screwdriver, yes they are not cheap but if you work on Japanese bikes they are a massive timesaver.
You can beat the head and it turns 12° like the old style impact drivers but these are designed for JIS screw heads not Philips or Pozi.
https://www.amazon.co.uk/Vessel-Megadora-Impacta-P2x150-Screwdriver/dp/B003BGZ9CO/ref=asc_df_B003BGZ9CO/?tag=googshopuk-21&linkCode=df0&hvadid=205341469171&hvpos=&hvnetw=g&hvrand=10273344919706108538&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1007835&hvtargid=pla-420694736819&psc=1

LollipopJimmy

listermint wrote: »

Get someone to tack a bolt head on it. Come off in a second. Screwing be a pain in the hole

I have a good set of extraction tools and I'll do it on the bench, have just bought a snap on drill so need to justify the spend on that anyway!

El Guapo!

listermint wrote: »

Screwing be a pain in the hole

Ooh matron!

H_Lime

D3V!L wrote: »

Just got this from the dealer.



I could have swore my bike was bigger :eek:

Story boss, any update on operation cut the bike in half and replace the bogey bit with a hopefully less bogey bit?
Did they give you a loaner?

D3V!L

H_Lime wrote: »

Story boss, any update on operation cut the bike in half and replace the bogey bit with a hopefully less bogey bit?
Did they give you a loaner?

No replacement bike as its up with Belfast BMW and their insurance doesn't cover bikes outside of the state. I have my wifes RNineT in the mean time.

Its had a replacement gear box and should hopefully be back with me this morning. Fingers crossed everything is ok

blade1

D3V!L wrote: »

No replacement bike as its up with Belfast BMW and their insurance doesn't cover bikes outside of the state. I have my wifes RNineT in the mean time.

Its had a replacement gear box and should hopefully be back with me this morning. Fingers crossed everything is ok

Now I know what BMW means!

Borrow My Wife's!

CJhaughey

blade1 wrote: »

Now I know what BMW means!

Borrow My Wife's!

I understood it to mean Bring More Wallet.

galwaytt

CJhaughey wrote: »

I understood it to mean Bring More Wallet.

Ever been shopping, then you'll know that Borrow My Wife IS the same as Bring More Wallet

CJhaughey

galwaytt wrote: »

Ever been shopping, then you'll know that Borrow My Wife IS the same as Bring More Wallet

I think there is an important distinction between Borrow my Wife and Borrow My Wife's:D

Jimmy Bottlehead

CJhaughey wrote: »

I think there is an important distinction between Borrow my Wife and Borrow My Wife's:D

Well you have to cover the substantial bill somehow...

H_Lime

D3V!L wrote: »

No replacement bike as its up with Belfast BMW and their insurance doesn't cover bikes outside of the state. I have my wifes RNineT in the mean time.

Its had a replacement gear box and should hopefully be back with me this morning. Fingers crossed everything is ok

They ain't hanging round turning her around in that time frame.
Have a buddy who's a beemer tech in UK who services police fleet bikes, he's done that more times than he cares to remember. Must ask him how many hrs labour it takes and what the costs would rack up to out of warrenty. BMW lube would be required for the rodgering you could expect.
Wonder do they know exactly the cause of the failure, knowing bmw I bet they do.
Ride the hole off her when you get her back;)

zubair

listermint wrote: »

Make the next one a nice Suzuki DL , bulletproof.

Suzuki... Bulletproof? They're made of chocolate.

D3V!L wrote: »

I could have swore my bike was bigger :eek:

LOL XD

listermint

zubair wrote: »

Suzuki... Bulletproof? They're made of chocolate.



LOL XD

Chocolate... Absolutely bullet proof. I've seen gxr go to the bottom of a lake. Be picked up some days later and fired up straight away after emptying the cylinders of water.

Suzuki's are bullet roof. My own takes an immense amount of abuse. Nearing 90,000 miles on mine. Yes miles and she's drives like it has a tenth of that.


As with any bike there's areas of rust on extremities like oil coolers and exhaust piping . But that's to be expected it gets driven.

zubair

listermint wrote: »

I've seen gxr go to the bottom of a lake.

Went in a gsxr, came out a gxr.

DelBoy Trotter

listermint wrote: »

Chocolate... Absolutely bullet proof. I've seen gxr go to the bottom of a lake. Be picked up some days later and fired up straight away after emptying the cylinders of water.

Suzuki's are bullet roof. My own takes an immense amount of abuse. Nearing 90,000 miles on mine. Yes miles and she's drives like it has a tenth of that.


As with any bike there's areas of rust on extremities like oil coolers and exhaust piping . But that's to be expected it gets driven.

I’ve had one Suzuki bike, and it’s put me off them for life. The greatest piece of sh1te that I’ve ever wasted money on

DelBoy Trotter

DelBoy Trotter wrote: »

I’ve had one Suzuki bike, and it’s put me off them for life. The greatest piece of sh1te that I’ve ever wasted money on

My first bike was a suzuki. It was only a little marauder 125 but after a few months parts were falling off it. Got rid of it for a yamaha and never looked back.

galwaytt

DelBoy Trotter wrote: »

I’ve had one Suzuki bike, and it’s put me off them for life. The greatest piece of sh1te that I’ve ever wasted money on

I'll refer you to D3v!L woes above.....

galwaytt

D3V!L wrote: »

Just got this from the dealer.



I could have swore my bike was bigger :eek:

Tell you what though- the fact they have a special jig to hold the motor, and that it looks well used (i.e. not shiney...) is very telling ....

D3V!L

galwaytt wrote: »

Tell you what though- the fact they have a special jig to hold the motor, and that it looks well used (i.e. not shiney...) is very telling ....

Its the main dealer for NI so id say the jig is well used. I drove the bike home from Belfast yesterday evening in torrential rain and it didn't miss a beat. The lads up there are bang on and really know how to look after their customers. I couldn't say the same for BMW breakdown recovery.

H_Lime

D3V!L wrote: »

Its the main dealer for NI so id say the jig is well used. I drove the bike home from Belfast yesterday evening in torrential rain and it didn't miss a beat. The lads up there are bang on and really know how to look after their customers. I couldn't say the same for BMW breakdown recovery.

Yer sorted so, a speedy resolution, then again it's a brand new machine that sh@t itself so one would expect that. Did you ask them or a new bike and what if it does it again out of interest?
Is there a lemon law here?

D3V!L

H_Lime wrote: »

Yer sorted so, a speedy resolution, then again it's a brand new machine that sh@t itself so one would expect that. Did you ask them or a new bike and what if it does it again out of interest?
Is there a lemon law here?

There is a lemon law and I had a cursory glance. I think they have 2 times to fix something in 6 months. Ive spent a fair few quid on extras so I'd be more inclined to get this fixed.

The gear box is smooth now, like my wife's RNineT. My GSA was never like this from day one so there must have been an underlying issue with it.