Amiko Alien 2 Triple Tuner Combobox

bappelbe

honestbroker wrote: »

Hi,
I tried to rev the Spark software back to v1.2.51 (Enigma2 Boot Upgrade) in order to install Enigma, coulddn't get it to load. Could I just install Hyperion V3 on top of V1.2.6X?
Thanks for all the info so far.
Jim

Versions of Spark below about 1.2.65 are not available because of a bug so it should be fine with the version you have

RoryCalhoun

Hi there.
I just installed TheTechGuys Hyperion V3 image on Triplex. (Thanks for the upload btw)
Everything seems okay except i can't access the oscam settings. I just get "403 Forbidden , Access denied."
Any ideas what could be wrong?

Update:
Got it working. Changed port, password, ip range, restarted router, restarted satbox.
One or more of these seems to have sorted it.

FlexMcMurphy

bappelbe wrote: »

Versions of Spark below about 1.2.65 are not available because of a bug so it should be fine with the version you have

You can get previous versions of Spark firmware from various places on the web such as the lavatronics forum. You will have to subscribe there but they have every Spark firmware including v1.2.51 (Enigma2 Boot Upgrade).

Many have said it is wise to install v1.2.51 prior to messing with enigma2 images as it makes it less likely the Alien 2 will get stuck in boot loops. I'm not sure if the Enigma2 Boot Upgrade code is included in every new Spark firmware release.

honestbroker wrote: »

I tried to rev the Spark software back to v1.2.51 (Enigma2 Boot Upgrade) in order to install Enigma, coulddn't get it to load. Could I just install Hyperion V3 on top of V1.2.6X?

Yes, but you may or may not have problems down the line. Were you installing it correctly? Was the USB key not recognised? You may need to try another Key or download the firmware again or from another source.

Flex

Big Wex fan

RoryCalhoun wrote: »

Hi there.
I just installed TheTechGuys Hyperion V3 image on Triplex. (Thanks for the upload btw)
Everything seems okay except i can't access the oscam settings. I just get "403 Forbidden , Access denied."
Any ideas what could be wrong?

Update:
Got it working. Changed port, password, ip range, restarted router, restarted satbox.
One or more of these seems to have sorted it.

just installed V3 myself & have the same 403 forbidden message also. I don't understand, where did u change port etc.?

Anyone - Is there a quick button for cool tv? don't see the multibutton plugin.

first impressions of V3 - excellent or as some people would say 'it's the pigs bollix'

GoodisonPark

Have you tried the red button?

RoryCalhoun

Big Wex fan wrote: »

just installed V3 myself & have the same 403 forbidden message also. I don't understand, where did u change port etc.?

Anyone - Is there a quick button for cool tv? don't see the multibutton plugin.

first impressions of V3 - excellent or as some people would say 'it's the pigs bollix'

First impressions so far are good. No problems so far. No freezing and much faster channel zap, info and epg.
I FTP'd to the box and edited the var/keys/oscam.conf.
Blue panel-settings-keymapper should do what you need.

DJ2005

How do I do this?

honestbroker

Hi,
I'm trying to inatall Hyperion version it starts to load but at E299 stops and displays T TO.
Any suggestions?
Jim

bappelbe

DJ2005 wrote: »

How do I do this?

could you be more specific? - do what exactly?

honestbroker

Sorry made a mess of previous post, should have read:
I'm trying to install Hyperion V3, it stops at E299 and displays E299 T TO
Any suggestions?
Jim

bappelbe

honestbroker wrote: »

Sorry made a mess of previous post, should have read:
I'm trying to install Hyperion V3, it stops at E299 and displays E299 T TO
Any suggestions?
Jim

is the flash drive in the rear port?

honestbroker

Yes it's a Kingston, properly formatted

bappelbe

honestbroker wrote: »

Yes it's a Kingston, properly formatted

Have you tried a different image?

Just try it to make sure it is not a problem with your machine

eddie_

Hi if anyone could help I would be so grateful, trying to get soarview channels in bettystown co Meath, I have a alien amiko box 1 sat and 1 terrestrial cable connected to the box. I have tried all different frequency on single channel scans Box can't find channels. I have aerial pointing to Claremont tp and have soarview channels on a soarview tv in bedroom. Any help would be great. I Have attached some pictures. Thanks

smee again

eddie_ wrote: »

Hi if anyone could help I would be so grateful, trying to get soarview channels in bettystown co Meath, I have a alien amiko box 1 sat and 1 terrestrial cable connected to the box. I have tried all different frequency on single channel scans Box can't find channels. I have aerial pointing to Claremont tp and have soarview channels on a soarview tv in bedroom. Any help would be great. I Have attached some pictures. Thanks

I don't use Spark but it looks like you are scanning satellite, not terrestrial

GoodisonPark

If your aerial is pointed to Cleremont Carn from Bettystown you will also pick up Kilkeel UK Freeview light.
Here are the frequencies.

Cleremont Carn 754000

Kilkeel 666000 , 642000 & 618200 (scan all three)

Im in Drogheda , not far from you and getting everything on my Amiko Alien2 triple Tuner.

I dont use Spark myself , would be much better for you if you ran Enigma2 on that box.

honestbroker

How do I physically connect my laptop to the Amiko Alien 2 triple in order to transfer files?
Do I go directly with a lan cable from my laptop?
My laptop is wireless, the Amiko is connect to the router via a powerline.

GoodisonPark

honestbroker wrote: »

How do I physically connect my laptop to the Amiko Alien 2 triple in order to transfer files?
Do I go directly with a lan cable from my laptop?
My laptop is wireless, the Amiko is connect to the router via a powerline.

Download Dreambox Control Centre into your laptop then connect wirelessly from your laptop to your Alien2 via your router.

eddie_

GoodisonPark wrote: »

If your aerial is pointed to Cleremont Carn from Bettystown you will also pick up Kilkeel UK Freeview light.
Here are the frequencies.

Cleremont Carn 754000

Kilkeel 666000 , 642000 & 618200 (scan all three)

Im in Drogheda , not far from you and getting everything on my Amiko Alien2 triple Tuner.

I dont use Spark myself , would be much better for you if you ran Enigma2 on that box.

Hi Goodson thanks for the reply I don't think I am running spark as it does not come up on screen with booting up, I tried those frequency and still can't get anything, I even got my sons box the same make and model and still the same. Maybe I am scanning it wrong.

eddie_

smee again wrote: »

I don't use Spark but it looks like you are scanning satellite, not terrestrial

Hi smee
I was in the terrestrial search program when I put in the frequency, am I running sparks I did not now as when it boots u it just says HDTV. I will go back in to terrestrial search and try it again is there a certain section in terrestrial search I should be in. Many thanks

honestbroker

Ignore previous post got it sorted

Big Wex fan

honestbroker wrote: »

Yes it's a Kingston, properly formatted

I had similar issue a couple of weeks back & had previously worked. After trying loads of different stuff with different images, undoing spark upgrades etc. Fix was to reformat usb key & put image on it again - not in any folder on the memory stick.

Compton

eddie_ wrote: »

Hi Goodson thanks for the reply I don't think I am running spark as it does not come up on screen with booting up, I tried those frequency and still can't get anything, I even got my sons box the same make and model and still the same. Maybe I am scanning it wrong.

Thats not spark nor an alien looks like the 8840 combo

honestbroker

Hi,
So you had just had e2jffs.img and uImage, but not in an enigma2 folder?

honestbroker

Which is better with this box a C line or an N line?

Big Wex fan

GoodisonPark wrote: »

Have you tried the red button?

Is it possible to change the order of the extensions on the Red button?

Big Wex fan

honestbroker wrote: »

Hi,
So you had just had e2jffs.img and uImage, but not in an enigma2 folder?

That worked for me but it was probably the usb key reformat that fixed it.

RoryCalhoun

@BigWexFan
I dont see your .conf file, but this is the end of mine...

[webif]
httpport = 8889
httpuser = root
httppwd = password
httpshowpicons = 1
httpallowed = 192.168.0.0-192.168.99.99

I changed the port number, password and httpallowed range,
restarted the box and router, then it worked.

honestbroker

How do I set up an N Line in oscam_8699?

RoryCalhoun

honestbroker wrote: »

How do I set up an N Line in oscam_8699?

I find this program handy..... https://www.dropbox.com/s/qyltzpxkm1uvwj2/CCcam-Converter_1.2.rar