Biansi Imist

Bubba9

Green Hornet wrote: »

Interesting that Bubba9 prefers the eGo-C for flavour over the iMist. Can't fault the eGo-C for flavour myself either. It's the damned leaks and it looks like the iMist doesn't suffer from those.

Yeah, it's a close call...both are great. By leaks do you mean the odd blob of juice on the top of the tank when you take it out to refill it? None on the iMist for me but get them a lot on the C but I just wipe it off with a tissue and it doesn't bother me at all. If you mean juice leaking into your mouth then that definitely would turn me off it but hasn't happened yet.

Green Hornet

Bubba9 wrote: »

Yeah, it's a close call...both are great. By leaks do you mean the odd blob of juice on the top of the tank when you take it out to refill it? None on the iMist for me but get them a lot on the C but I just wipe it off with a tissue and it doesn't bother me at all. If you mean juice leaking into your mouth then that definitely would turn me off it but hasn't happened yet.

My C leaks all over the cone and atty if it's not stored tank side down. When that happens I get a rotten chemical taste from the vapour. Tried different atties, different tanks, silicone caps (which were a complete disaster) but still ended up with leaks.

Storing tank side down resolved the leaks though and the flavour from the C is great. Mind you, the eGo-W is better and doesn't leak so I'm using that at the moment.

Green Hornet

Just checking the IV website and the iMist has been removed. Atomisers and the full kit too!

Maybe the websites being updated?

Neil_Sedaka

I can still see the listing, although it's out of stock.

I really hope they get these back in soon, two people I've recommended them to are waiting to place orders for full kits.

I'm 3 weeks into my Imist experience and am extremely happy with the performance and reliability.

The only other supplier I can find (safercigs) seems to be out of stock for some time too!

This is a great product and I really hope it hasn't gone belly up.
Seriously considering ordering a heap of them directly and becoming a vendor!!!

Green Hornet

Neil_Sedaka wrote: »

I can still see the listing, although it's out of stock.

I really hope they get these back in soon, two people I've recommended them to are waiting to place orders for full kits.

I'm 3 weeks into my Imist experience and am extremely happy with the performance and reliability.

The only other supplier I can find (safercigs) seems to be out of stock for some time too!

This is a great product and I really hope it hasn't gone belly up.
Seriously considering ordering a heap of them directly and becoming a vendor!!!

Ah, just checked and they've added a statement that shipping was delayed until end of next week. Must have taken the listing down to update it. It's back now anyway.

Going to try the atomiser when it comes in to see how it compares to the eGo-C. The C is a good product too to be fair though.

stevenmu

I've been using these for roughly a little over a week now. My favourite device so far. They seem to be relatively trouble free and give fantastic vapour and TH.

Two things I've noticed though, wicking doesn't seem to be fantastic, if I take very long draws from it, I start to get a burnt taste on the 2nd/3rd draw. I've tried adjusting the wick but I don't think it has made much difference. It's not a very bad problem because short draws work really well with this, but I'd like to be able to take longer draws too if anyone has any tips on this?

I also noticed that after about a weeks use it started going through juice really quickly, and the body started felling a little greasy, so I think it had a small leak. Do the tanks have a limited lifespan, are they a disposable part that should be switched every now and then?

Green Hornet

stevenmu wrote: »

I've been using these for roughly a little over a week now. My favourite device so far. They seem to be relatively trouble free and give fantastic vapour and TH.

Two things I've noticed though, wicking doesn't seem to be fantastic, if I take very long draws from it, I start to get a burnt taste on the 2nd/3rd draw. I've tried adjusting the wick but I don't think it has made much difference. It's not a very bad problem because short draws work really well with this, but I'd like to be able to take longer draws too if anyone has any tips on this?

I also noticed that after about a weeks use it started going through juice really quickly, and the body started felling a little greasy, so I think it had a small leak. Do the tanks have a limited lifespan, are they a disposable part that should be switched every now and then?

I have the eGo-C and the wick is the weak point in that too I think really. When it's wicking just right it's a fantastic piece of kit but when it's not right its a heap of ****. Looks like the iMist is the same then.

stevenmu

stevenmu wrote: »

I've been using these for roughly a little over a week now. My favourite device so far. They seem to be relatively trouble free and give fantastic vapour and TH.

Two things I've noticed though, wicking doesn't seem to be fantastic, if I take very long draws from it, I start to get a burnt taste on the 2nd/3rd draw. I've tried adjusting the wick but I don't think it has made much difference. It's not a very bad problem because short draws work really well with this, but I'd like to be able to take longer draws too if anyone has any tips on this?

I also noticed that after about a weeks use it started going through juice really quickly, and the body started felling a little greasy, so I think it had a small leak. Do the tanks have a limited lifespan, are they a disposable part that should be switched every now and then?

pull the wick down towards the coill a bit more with tweezers and separating the end a bit. you could also try taking a quick draw before activating the attomiser. Haven’t really had a big issue with that on the iMist. only prob I had is that I lost the silicone thing on the tank, without which it will leak a bit so have had to order some tanks. still very happy with it overall.

stevenmu

That seems to have done the trick, thanks. I had tried pulling the wick down a bit, but separating the end a bit seems to be the key. Wicking fantastically now and no hint of burnt taste no matter how much I draw on it.

Aaron Chen

glasso wrote: »

cool, will probably give it a go once my current atties give up the ghost. have settled on atties + good tank or direct drip. cartos just too much hassle with all that refilling, not knowing when they will run out, spilling juice etc etc.

how does the taste and vapour compare to direct drip?

see that some forums in uk suggest that maybe you can rewick these things with your own wire / wick - could work out very economical.

This is Aaron Chen from Biansi Company, thanks for your interest, we can make the wick a little longer.

Aaron Chen

Bubba9 wrote: »

Yeah, it's a close call...both are great. By leaks do you mean the odd blob of juice on the top of the tank when you take it out to refill it? None on the iMist for me but get them a lot on the C but I just wipe it off with a tissue and it doesn't bother me at all. If you mean juice leaking into your mouth then that definitely would turn me off it but hasn't happened yet.

ego-c leaking problem? Imist atomizer hasn't happen yet. by the way, Imist is Imist, ego-c is ego-c, it is completely different product.

Aaron Chen

Sir Digby Chicken Caesar

Aaron Chen wrote: »

ego-c leaking problem? Imist atomizer hasn't happen yet. by the way, Imist is Imist, ego-c is ego-c, it is completely different product.

Aaron Chen

yeah i think he was talking about the ego-c not the imist when he mentioned the leaking.

Aaron Chen

That seems to have done the trick, Aha, that is why we make the wick at that size, though we can make them a little longer.

Thanks, all the best.

Aaron Chen

Aaron Chen

Sir Digby Chicken Caesar wrote: »

yeah i think he was talking about the ego-c not the imist when he mentioned the leaking.

I am new in this forum, haha, talk to me.

Aaron

Sir Digby Chicken Caesar

welcome to boards.ie
loads of people here seem to love the Imist so you're clearly doing something right, it's been sold out everywhere for ages. congrats.

wingnut32

A new Irish site will be up and running soon and will have these in very shortly

Aaron Chen

Sir Digby Chicken Caesar wrote: »

welcome to boards.ie
loads of people here seem to love the Imist so you're clearly doing something right, it's been sold out everywhere for ages. congrats.

Hey Caesar, thank you, haha.
Imist is a great product, Imist come into the market in August, 2011.

ego-c also a great product.

We will constantly improve our product and quality. To provide a better user experience, lol.

Aaron

stevenmu

Hi Aaron, welcome to boards, good to see a manufacturer posting here. If you could improve the wicks a bit that would be fantastic. I did post above that it was perfect after spreading it out, and it was for a while, but after a while I do start getting dry hits again and have to readjust the wick.

I do really love the device though, it's the best I've used, and having to adjust the wick once a day or so isn't too bad considering how easy they are to fill and how great the vapour is when it's working ok.

Aaron Chen

wingnut32 wrote: »

A new Irish site will be up and running soon and will have these in very shortly

Congratulations. A new boss, haha.

Aaron Chen

stevenmu wrote: »

Hi Aaron, welcome to boards, good to see a manufacturer posting here. If you could improve the wicks a bit that would be fantastic. I did post above that it was perfect after spreading it out, and it was for a while, but after a while I do start getting dry hits again and have to readjust the wick.

I do really love the device though, it's the best I've used, and having to adjust the wick once a day or so isn't too bad considering how easy they are to fill and how great the vapour is when it's working ok.

Hey, somebody said “That seems to have done the trick” trick=knack? lol

I will reply you tomorrow, it is late night we here, time to go to bed.

Hey Stevenmu, spread out = biforked?

Aaron

Neil_Sedaka

Hi Aaron and welcome.

Can I suggest that the wick is made slightly thicker so that it doesn't shift up and down in the atomizer.
It's a great product and as you can see from my posts here, I'm very impressed with it.

Thanks for your input here.

Aaron Chen

Neil_Sedaka wrote: »

Hi Aaron and welcome.

Can I suggest that the wick is made slightly thicker so that it doesn't shift up and down in the atomizer.
It's a great product and as you can see from my posts here, I'm very impressed with it.

Thanks for your input here.

Hey Neil, make slightly thicker? hmm, it's a good idea, thanks. I got it. I can do this.

Any suggestion do not hesitate to post here, or contact with Aaron, I will reply to you in first time.

Aaron

Aaron Chen

One question, all in this forum speak english? english is the second language in Irland?

My english is not as good as my chinese, haha.

Aaron

stevenmu

Aaron Chen wrote: »

Hey, somebody said “That seems to have done the trick” trick=knack? lol

Yes. And it does work great for a while, but I find I still need to readjust the wick every now and then.

Hey Stevenmu, spread out = biforked?

I have tried forking it into different sections, and into one flattened section. One flattened section seems to work best for me.

And when it works perfectly then it is such a fantastic device.

Aaron Chen

stevenmu wrote: »

Yes. And it does work great for a while, but I find I still need to readjust the wick every now and then.

I have tried forking it into different sections, and into one flattened section. One flattened section seems to work best for me.

And when it works perfectly then it is such a fantastic device.

Hmm, I used a Imist atomizer myself, like what you said, forking wick into different sections, it touch the heating wire (electric wire) completely, THAT IS WHY FEEL BETTER TASTE, do you agree with me? because blance liquid in the heating wire.

Hope you can understand what I said.

Aaron

Aaron Chen

derra wrote: »

I have a few small bits here that you can have, assuming it's very little that you need for each repair.
I get it from here for repairing the Bulli.
http://bulli-smoker.de/index.php?a=45
Is it possible to replace the wire in that atty?

Send me a PM and i'll post it off to ya, just don't expect much

Hey, bulli-smoker is a germany company, he is one of my customer in germany, lol. main product is ego-t atomizer, bullic-smoker king of vapor atomizer. A1, A2.

Aaron

derra

Aaron Chen wrote: »

Hey, bulli-smoker is a germany company, he is one of my customer in germany, lol. main product is ego-t atomizer, bullic-smoker king of vapor atomizer. A1, A2.

Aaron

Hey Aaron, welcome to the forum
Yes, the King of Vapor Cetin lol
I like the A2 atomiser, i must try the Imist some time.

Does Cetin buy glassfibre off you ?

Esel

Aaron Chen wrote: »

One question, all in this forum speak english? english is the second language in Irland?

My english is not as good as my chinese, haha.

Aaron

Aaron, Irish is the first official language of Ireland. However, only a small percentage of the people use it every day. English is the main language used here.

However, it is called Hiberno-English, and some of the usage and phrases are diffrerent from England.

For example:

"I am after eating my dinner" means "I have eaten my dinner."

A person from Great Britain would think that it meant "I want to eat my dinner".

Your English is grand! ('grand' means 'fine' or 'satisfactory' in Ireland...).

A question for you: Is the iMist shortage here due to the Chinese new year (post office delays etc.)?

Aaron Chen

derra wrote: »

Hey Aaron, welcome to the forum
Yes, the King of Vapor Cetin lol
I like the A2 atomiser, i must try the Imist some time.

Does Cetin buy glassfibre off you ?

Hey Derra, thanks for your question, Imist and cartridge from me. Glassfibre not buy from me. hehe. I just make wick, cut the glassfibre to make them at the same size cover with mesh. haha.

Aaron

Aaron Chen

Esel wrote: »

Aaron, Irish is the first official language of Ireland. However, only a small percentage of the people use it every day. English is the main language used here.

However, it is called Hiberno-English, and some of the usage and phrases are diffrerent from England.

For example:

"I am after eating my dinner" means "I have eaten my dinner."

A person from Great Britain would think that it meant "I want to eat my dinner".

Your English is grand! ('grand' means 'fine' or 'satisfactory' in Ireland...).

A question for you: Is the iMist shortage here due to the Chinese new year (post office delays etc.)?

Hey Esel, thanks, I know that, lol. Hope you have a great weekend, grand weekend, haha.

The Imist stortage because:
1, we just back from chinese new year, some material shortage.
2, The material supplier just back from chinese new year. They need time to supply material to us.
3, We make a gun black color, it is a new color for Imist, some deluxe watch has this color, gun-black color cost time.
4, order is more and more, we need arrange production plan, VIP first.

All of you can be my VIP, lol. Please mention Mr Aaron Chen if you send inquiry, hehe. Thanks.

Aaron

derra

Aaron Chen wrote: »

Hey Derra, thanks for your question, Imist and cartridge from me. Glassfibre not buy from me. hehe. I just make wick, cut the glassfibre to make them at the same size cover with mesh. haha.

Aaron

Thanks Aaron,
Nobody can find the source of the Bulli wick, wicks extremely well.
Maybe your wick is similar, must try it.

Aaron Chen

derra wrote: »

Thanks Aaron,
Nobody can find the source of the Bulli wick, wicks extremely well.
Maybe your wick is similar, must try it.

Hmm, thanks.
I don't know his source of wick.

Aaron

stevenmu

Aaron Chen wrote: »

Hmm, I used a Imist atomizer myself, like what you said, forking wick into different sections, it touch the heating wire (electric wire) completely, THAT IS WHY FEEL BETTER TASTE, do you agree with me? because blance liquid in the heating wire.

Hope you can understand what I said.

Aaron

I have done a little experimenting, with the wick shape and some other things. Spreading the wick out does help quite a bit, but I think I've found something better

After experimenting with the wick I noticed something else though. It always works really great for a while after filling with juice. It also occured to me that the iMist never leaks, ever, so it must be really airtight. I started to wonder if vacumn forms in the tank and makes it harder for the wick to pull juice out. So I left the wick as normal, and when it seemed like I might get a dry hit, I'd pull the tank out to let air in, then put it back in and continue vaping and it was perfect. Then I noticed that if I blow hard into the mouthpiece some a tiny amount of air will bubble up into the tank.

So now I just give the moutpiece a little blow every now and then and it wicks perfectly. And keeps the fantastic flavour and vapor all of the time

(I really love this device)

Aaron Chen

How to refill liquid for Imist cartridge? anybody know? hehe.

Using a needle bottle, liquid bottle with needle, I am designing a new liquid bottom now, easy for refilling imist cartridge.

Aaron

Aaron Chen

stevenmu wrote: »

I have done a little experimenting, with the wick shape and some other things. Spreading the wick out does help quite a bit, but I think I've found something better

After experimenting with the wick I noticed something else though. It always works really great for a while after filling with juice. It also occured to me that the iMist never leaks, ever, so it must be really airtight. I started to wonder if vacumn forms in the tank and makes it harder for the wick to pull juice out. So I left the wick as normal, and when it seemed like I might get a dry hit, I'd pull the tank out to let air in, then put it back in and continue vaping and it was perfect. Then I noticed that if I blow hard into the mouthpiece some a tiny amount of air will bubble up into the tank.

So now I just give the moutpiece a little blow every now and then and it wicks perfectly. And keeps the fantastic flavour and vapor all of the time

(I really love this device)

Thanks for your sharing, your experience is helpful for imist user, hehe.

I change new wick per day, because I make wick by myself, haha.

Aaron

newmark

Anyone know of anywhere in Ireland selling imist attys at the moment? Im fed up with leaks on ego-t and dry hits on ego-c... Im really hoping i get this soon because all the reports on it sound good and i was even thinking of going back to de evil cigarettes yesterday out of frustration when everything i did with my current set up went wrong.

Green Hornet

newmark wrote: »

Anyone know of anywhere in Ireland selling imist attys at the moment? Im fed up with leaks on ego-t and dry hits on ego-c... Im really hoping i get this soon because all the reports on it sound good and i was even thinking of going back to de evil cigarettes yesterday out of frustration when everything i did with my current set up went wrong.

Don't think so. SaferCigs in the UK supply them but are out of stock too:

http://www.safercigs.co.uk/IMIST_Atomizer/p705283_5330582.aspx

Aaron Chen

Green Hornet wrote: »

Don't think so. SaferCigs in the UK supply them but are out of stock too:

http://www.safercigs.co.uk/IMIST_Atomizer/p705283_5330582.aspx

Safercigs, Irishvapers.

Or inquire to Aaron, hehe, please mention Mr Aaron Chen.

Aaron

Green Hornet

The iMist has just come back into stock at Irish Vapers. I've just bought one to compare to the eGo-C. Interesting to see how they compare because most people seem to have either one or the other but not both.

stevenmu

Looking forward to seeing how it works for you, I'm loving mine, but there's always that part of you wondering if there's something much better out there.

Green Hornet

stevenmu wrote: »

Looking forward to seeing how it works for you, I'm loving mine, but there's always that part of you wondering if there's something much better out there.

I know how you feel! I'm the same. I'm happy with my C but keep hearing great things about the iMist and want to compare them.

The other thing about the C is that tere will be anLR version but I dont think the iMist has that option.

stevenmu

Aaron Chen wrote: »

How to refill liquid for Imist cartridge? anybody know? hehe.

Using a needle bottle, liquid bottle with needle, I am designing a new liquid bottom now, easy for refilling imist cartridge.

Aaron

I mostly use a needle bottle. When I use a normal bottle top it forms an airtight seal with the tank so you have to really squeeze to overcome the air pressure, it still works fine, just a needle bottle is slightly better.

stevenmu

Green Hornet wrote: »

The other thing about the C is that tere will be anLR version but I dont think the iMist has that option.

I haven't heard of one yet, it works so well for me on an eGo battery though I don't know if there's any need. It give plenty of vapour as it is, and compared to the other things I've use (DCCs and eGo-W), you can get a great hit for a much shorter draw on it. Actually that's one of my favourite things about it, rather than one big long draw, I can take two or three shorter ones and still get a good hit on them all.

Oh, and one thing to try when you get it is to hold the button and blow into the mouthpiece a little to see the vapour come out the air intakes, it looks pretty cool (though I'm very easily amused).

newmark

Does anyone know if you can buy replacement wicks for the imist anywhere? I thought I seen them on some website in packs of 5 but I cant seem to find them now. I'm beginning to think I was imagining things. I have ordered the imist atty from IV and it comes with 2 wicks but if I like it I want to have a source to get wicks from. Looking forward to getting it now hopefully it will be a stayer...

Sir Digby Chicken Caesar

irishvapers have replacement wicks afaik

Green Hornet

Yeah, of all of the hardware that I've tried (and there's been more than enough!!) it definitely gives significantly more vapour alright. For some reason TVS juices don't come out well on mine though. There's always a funny aftertaste.

stevenmu

IV have them here: http://www.irishvapers.ie/accesories/165-wick-replacements-for-imist-atomizer.html.

They're kinda hard to find under the navigation, you have to select the Accessories category, not one of the sub-categories.

newmark

Thanks for that i knew i seen them before thought i was going mad..

stevenmu wrote: »

IV have them here: http://www.irishvapers.ie/accesories/165-wick-replacements-for-imist-atomizer.html.

They're kinda hard to find under the navigation, you have to select the Accessories category, not one of the sub-categories.

Green Hornet

How long did you get out of a wick? The atomiser that I've ordered has (I assume) 1 wick in the atty + 1 spare.

Neil_Sedaka

The wick in mine is there about a month now, I take it out every week and wash it.