Waggle your 'Joystick' - Post your 3Dmark Scores here

wotzgoingon · 29-07-2016 12:25pm

ShadowHearth, will you do a benchmark of the new timespy dx12 with the 1060 as I would like to see what score you get.

mossym · 29-07-2016 1:47pm

mossym wrote: »

no waggling here, but just for giggles i ran firecrest dx11 test on my new build. giggles bit it currently has a 5670 with 512mb of memory in it, an old card i am using until my new card arrives. a whopping score of 906

http://www.3dmark.com/3dm/13697925

only posting it as sitting here waiting on my new 1070 to arrive today, so will run it again once it gets here, suspecting there may be a bit of an increase..:)

1070 arrived. installed.

906 this morning.

slight improvement alright

http://www.3dmark.com/3dm/13702822?

Redfox25 · 29-07-2016 2:12pm

mossym wrote: »

1070 arrived. installed.

906 this morning.

slight improvement alright

http://www.3dmark.com/3dm/13702822?

Hardly worth the upgrade really..........

ShadowHearth · 29-07-2016 3:09pm

wotzgoingon wrote: »

ShadowHearth, will you do a benchmark of the new timespy dx12 with the 1060 as I would like to see what score you get.

I am still on win 7 m8. I think dx12 is only for new windows?
I don't have spy one, isthat the one you pay?

.G. · 29-07-2016 3:11pm

cursai wrote: »

The division, far cry 4, metro, crisis 3....

I have the first and the last of those.I don't play either of them anymore but If I have time I'll give it a bash.

.G. · 29-07-2016 6:30pm

Crysis maxed out only getting to mid 30's at 4k. The Division a bit higher, early 40's. Geforce experience optimal settings and they both hit 60 no issue and still look every bit as good to my eyes.

wotzgoingon · 29-07-2016 6:57pm

ShadowHearth wrote: »

I am still on win 7 m8. I think dx12 is only for new windows?
I don't have spy one, isthat the one you pay?

Why are you still using a soon to be legacy OS?
I would recommend the upgrade to Win 10.

mossym · 29-07-2016 7:01pm

wotzgoingon wrote: »

Why are you still using a soon to be legacy OS?
I would recommend the upgrade to Win 10.

and if so do it quick, runs out today doesn't it?

wotzgoingon · 29-07-2016 7:29pm

mossym wrote: »

and if so do it quick, runs out today doesn't it?

Just looked it up and yes you are right the deadline is today.

ShadowHearth · 29-07-2016 7:58pm

wotzgoingon wrote: »

Why are you still using a soon to be legacy OS?
I would recommend the upgrade to Win 10.

I havent had a

Legit

~Windows copy since 95.

Prices of windows 10 is a bit lialia right now. And I dont know about those keys from reddit. Too many people get their revoked.

challengemaster · 29-07-2016 8:01pm

ShadowHearth wrote: »

I havent had a
Legit
~Windows copy since 95.

Prices of windows 10 is a bit lialia right now. And I dont know about those keys from reddit. Too many people get their revoked.

Pretty sure once you use the key to upgrade nothing can happen to it.

Cuddlesworth · 29-07-2016 10:50pm

superg wrote: »

Crysis maxed out only getting to mid 30's at 4k. The Division a bit higher, early 40's. Geforce experience optimal settings and they both hit 60 no issue and still look every bit as good to my eyes.

Crytek(makers) were really always engine makers who set their sights on ****ting all over current gen cards. I don't think they ever gave a crap about sales. I'm not surprised a 3 year old game from them still creates problems at 4k.

EoinHef · 29-07-2016 10:58pm

EoinHef wrote: »

CPU Score is holding me back,its next on the list for an upgrade,probably next year some time.

Still dialing in an overclock but this result is with gpu +103 core and +155 memory,tops out about 76C in the benchmark. CPU is @ 4.3Ghz

Will update with DX12 scores at a later date

DX11: http://www.3dmark.com/fs/9493546

Adding DX12

DX12:http://www.3dmark.com/spy/175742

cursai · 30-07-2016 9:40pm

superg wrote: »

Crysis maxed out only getting to mid 30's at 4k. The Division a bit higher, early 40's. Geforce experience optimal settings and they both hit 60 no issue and still look every bit as good to my eyes.

Thanks for that. Getting around the same with a 980ti. but hitting the division mid thirties.

MarkAnthony · 30-07-2016 11:33pm

Frame rates on a 1080 @ 3440 x 1440:

Doom - 100FPS+
Warhammer Total war - 40-50FPS
Fallout 4 - 75 FPS ish - haven't tested this much.

.G. · 31-07-2016 10:25am

Cooling is everything on these cards, overclocks don't matter much it seems. I can put up to 150mhz on my card but all that happens is it gets hotter faster and throttles the boost quicker. if I put 50mhz on it it ends up hovering at 75c and boost of 2012ish. If I go higher it will boost higher but once it hits the mid 70s in temps the boost drops back to the same level as with 50Mhz on it.

So those Palit, Gainward, Inno cards with massive coolers may well do the better job of holding higher boosts.

cursai · 31-07-2016 11:02am

superg wrote: »

Cooling is everything on these cards, overclocks don't matter much it seems. I can put up to 150mhz on my card but all that happens is it gets hotter faster and throttles the boost quicker. if I put 50mhz on it it ends up hovering at 75c and boost of 2012ish. If I go higher it will boost higher but once it hits the mid 70s in temps the boost drops back to the same level as with 50Mhz on it.

So those Palit, Gainward, Inno cards with massive coolers may well do the better job of holding higher boosts.

Get the AMD version of the 1080

EoinHef · 31-07-2016 1:07pm

superg wrote: »

Cooling is everything on these cards, overclocks don't matter much it seems. I can put up to 150mhz on my card but all that happens is it gets hotter faster and throttles the boost quicker. if I put 50mhz on it it ends up hovering at 75c and boost of 2012ish. If I go higher it will boost higher but once it hits the mid 70s in temps the boost drops back to the same level as with 50Mhz on it.

So those Palit, Gainward, Inno cards with massive coolers may well do the better job of holding higher boosts.

Thats why i was asking for your temps the other day. Ive found my card will happily OC with +100 core and +200 memory with a power limit of 95%,boost will then hoover around 2000Mhz-2050Mhz. Also using a a custom fan profile to keep the card reasonably cool,the zotac stock one was terrible and the card shot straight to 82C with no OC,with the custom profile i can keep it to about 77C but with the OC.

.G. · 31-07-2016 2:05pm

EoinHef wrote: »

Thats why i was asking for your temps the other day. Ive found my card will happily OC with +100 core and +200 memory with a power limit of 95%,boost will then hoover around 2000Mhz-2050Mhz. Also using a a custom fan profile to keep the card reasonably cool,the zotac stock one was terrible and the card shot straight to 82C with no OC,with the custom profile i can keep it to about 77C but with the OC.

I found a memory OC actually made the card worse! Keeping them at mid 70's seems to be the key, anything higher and they throttle. I haven't touched power limits or fan profiles yet either.

EoinHef · 31-07-2016 2:46pm

Yeah mid 70's would be ideal,im finding with the zotac that the fans become audible around 75% so once the cards hits 70C they ramp up to that as its the highest i really want them going as i dont want the rig to be loud,that keeps the card j in the 70's (78C max) with the games that push it hardest like Witcher and Crysis 3.

Squidgy Black · 31-07-2016 2:54pm

http://www.3dmark.com/fs/9584114

Not the greatest but I'm thinking of swapping out the 280x for a 1060 or an rx480. Picked the 280x up cheap though to complete my build but it'll do for now!

.G. · 31-07-2016 3:08pm

EoinHef wrote: »

Yeah mid 70's would be ideal,im finding with the zotac that the fans become audible around 75% so once the cards hits 70C they ramp up to that as its the highest i really want them going as i dont want the rig to be loud,that keeps the card j in the 70's (78C max) with the games that push it hardest like Witcher and Crysis 3.

Yeah I was hammering the witcher yesterday, GPU usage 100% most of the time. Its a good work out for clocks and cooling!.

twinsen · 01-08-2016 2:26am

Lads, if you have NVidia gfx, disable NVidia stream service if you don't stream. you can expect few extra points in benchmarks.

.G. · 01-08-2016 10:18pm

superg wrote: »

I found a memory OC actually made the card worse! Keeping them at mid 70's seems to be the key, anything higher and they throttle. I haven't touched power limits or fan profiles yet either.

Played around with the fan profile, have it boosting to a steady 2075 while hovering in the low 70s and the fans at about 80% which isn't too noisy, my bloody HDD is still the noisiest thing in my PC! Upped the case fans a bit higher to get more cool air into the GPU area which seems to help.

levitronix · 05-08-2016 12:14pm

http://www.3dmark.com/3dm/13882152

bit below middle of the road

cursai · 05-08-2016 1:43pm

Dx12 http://www.3dmark.com/spy/213303

Dx11 http://www.3dmark.com/fs/9622274

.....doubt I'll get any higher with what I have.

dinnybyrne · 05-08-2016 8:46pm

mossym wrote: »

1070 arrived. installed.

906 this morning.

slight improvement alright

http://www.3dmark.com/3dm/13702822?

same setup here, only have it a week. Have you tried overclocking your cpu?
This is at 3.9mhz but im struggling to get it higher...
http://www.3dmark.com/fs/9640639

dinnybyrne · 05-08-2016 9:19pm

dinnybyrne wrote: »

same setup here, only have it a week. Have you tried overclocking your cpu?
This is at 3.9ghz but im struggling to get it higher...
http://www.3dmark.com/fs/9640639

got the gpu up to 4.2ghz heres the result, really wanna break 15000
http://www.3dmark.com/3dm/13895450

twinsen · 05-08-2016 10:42pm

dinnybyrne wrote: »

got the gpu up to 4.2ghz heres the result, really wanna break 15000
http://www.3dmark.com/3dm/13895450

Your ram is running only @ 2,286 MH.Try set it up for 2400 maybe?

dinnybyrne · 05-08-2016 11:31pm

twinsen wrote:

Your ram is running only @ 2,286 MH.Try set it up for 2400 maybe?

Yeah I guess I could do that, its rated at 2400 could I go 2600?

twinsen · 06-08-2016 1:03am

dinnybyrne wrote: »

Yeah I guess I could do that, its rated at 2400 could I go 2600?

My ram is rated 2400, but works on 2700 no problem. plus your ram is made by avexir, which as far as i remember is a premium brand, so should be ok to overclock.

mossym · 06-08-2016 9:12am

dinnybyrne wrote: »

same setup here, only have it a week. Have you tried overclocking your cpu?
This is at 3.9mhz but im struggling to get it higher...
http://www.3dmark.com/fs/9640639

i went with the non k version so overclocking not really an option, might have been a mistake in hindsight but didin't really think id want to overclock. presume yours is a k model?

my gpu is running as stock out of the box as well, not tried to do anything with that either, probably should

thats a nice boost over my scores that you got

cursai · 06-08-2016 11:23am

mossym wrote: »

i went with the non k version so overclocking not really an option, might have been a mistake in hindsight but didin't really think id want to overclock. presume yours is a k model?

my gpu is running as stock out of the box as well, not tried to do anything with that either, probably should

thats a nice boost over my scores that you got

Think he gotten higher since Mossym. http://www.3dmark.com/fs/9656412

Hes waggling his Joystick.

mossym · 06-08-2016 11:37am

cursai wrote: »

Think he gotten higher since Mossym. http://www.3dmark.com/fs/9656412

Hes waggling his Joystick.

serious waggle, 25% improvement on my score. must look at what i can do with my video card, any good guides floating around? always just run stock

wotzgoingon · 06-08-2016 12:43pm

mossym wrote: »

serious waggle, 25% improvement on my score. must look at what i can do with my video card, any good guides floating around? always just run stock

One good thing for you is you got a Z170 motherboard so just look up the bios to allow overclocking of a non k chip and do a overclock on the chip.

mossym · 06-08-2016 12:56pm

wotzgoingon wrote: »

One good thing for you is you got a Z170 motherboard so just look up the bios to allow overclocking of a non k chip and do a overclock on the chip.

just looking at that now. thanks. probably need to get a better cooler before i try and of this, only running the stock cooler that came with the cpu now

dinnybyrne · 06-08-2016 9:21pm

mossym wrote: »

just looking at that now. thanks. probably need to get a better cooler before i try and of this, only running the stock cooler that came with the cpu now

i did it with the stock cooler for the tests, wouldnt leave it running with that overclock on a stock cooler.
Ordered a better cooler today for 30 quid on amazon.
you should be safe to go 3.9ghz on your stock cooler, i was running it for days like that.

mossym · 07-08-2016 2:39pm

yeah, been meaning to pick one up anyway. like the performance of the noctua's but wow do they look awful

cursai · 10-08-2016 12:58am

Any waggles lately?

mossym · 10-08-2016 9:00am

i'll be re-running mine soon, have a new cooler on the way and once that is in will be oc'ing my cpu and gpu, hoping for a nice boost over my previous scores, given what dinnybyrne posted

challengemaster · 10-08-2016 3:52pm

Should maybe a few other benchmarks be thrown in the mix along with 3dmark? I mean it's nice and all, but it would always be nice to have a repository of boardsies own gaming benchmark scores, especially when speccing rigs.

ShadowHearth · 10-08-2016 6:00pm

challengemaster wrote: »

Should maybe a few other benchmarks be thrown in the mix along with 3dmark? I mean it's nice and all, but it would always be nice to have a repository of boardsies own gaming benchmark scores, especially when speccing rigs.

Unigen? Always liked that one.

wotzgoingon · 10-08-2016 6:14pm

Xeon X5660 @ 4.2GHz
R9 290

EoinHef · 10-08-2016 7:58pm

Part of the problem with Unigine is everybody has to make sure they use the exact same settings and versions,which is more difficult than you would think.

ED E · 10-08-2016 8:02pm

challengemaster wrote: »

Should maybe a few other benchmarks be thrown in the mix along with 3dmark? I mean it's nice and all, but it would always be nice to have a repository of boardsies own gaming benchmark scores, especially when speccing rigs.

Put Cinebench in there (hehehe)!

Simon Gruber Says · 10-08-2016 8:52pm

DX 11: http://www.3dmark.com/fs/9722352

DX 12: http://www.3dmark.com/spy/250845

versus before I upgraded from SLI 770's and increased the OC on the processor

http://www.3dmark.com/fs/1186145

dinnybyrne · 10-08-2016 9:00pm

Did you oc the 1080?

Simon Gruber Says · 10-08-2016 9:02pm

Just used the OC profile in the MSI Gaming App.

EoinHef · 10-08-2016 9:11pm

Simon Gruber Says wrote: »

*snip*

4.7Ghz on the 3770k,nice:)

Icyseanfitz · 11-08-2016 5:16pm

lads are there any good guides for overclocking a 6700k on a msi board? tried just changing the ratio but the second i go to 4.6 i need voltages higher than 1.35

Waggle your 'Joystick' - Post your 3Dmark Scores here

Comments