General Discussion on Vendors, Devices etc.

NegativeCreep · 20-08-2015 05:52PM

8mm wrote: »

You might need a new head - as in that schite just blew the head off me.

I've found that I take shorter drags and still get a good lung full the lower the ohms get.

I'll get some lower nic juice then so haha

JH_raheny · 20-08-2015 09:20PM

NegativeCreep wrote: »

Bought an iJust 2. I'm so excited. Broke my iStick a few weeks ago and have been using a crappy battery with a fancy tank for ages. Have also never used a sub ohm set-up.

Will I die if I use my usual 18mg liquid with a sub ohm thingy?

I think you will get seriously lightheaded if you put 18mg in the ijust2 when fully charged on a 0.3 coil, I wouldn't recommend it

Glebee · 20-08-2015 09:26PM

JH_raheny wrote: »

I think you will get seriously lightheaded if you put 18mg in the ijust2 when fully charged on a 0.3 coil, I wouldn't recommend it

6mg had me spinning with 0.3 at full charge. Very hot vape as well.

rottie 11 · 21-08-2015 12:34PM

Back using my nautilus now because I can't open my gs air it's totally jammed

trixiebust · 21-08-2015 01:34PM

rottie 11 wrote: »

Back using my nautilus now because I can't open my gs air it's totally jammed

Bought two myself a few weeks ago. One is still going strong, but the threads on the other went after about 6 days. Seriously thinking of upgrading to a Kanger sub mini.

JH_raheny · 21-08-2015 02:01PM

rottie 11 wrote: »

Back using my nautilus now because I can't open my gs air it's totally jammed

Stick it in the freezer for 15 minutes and try again

rottie 11 · 21-08-2015 02:17PM

trixiebust wrote: »

Bought two myself a few weeks ago. One is still going strong, but the threads on the other went after about 6 days. Seriously thinking of upgrading to a Kanger sub mini.

They are a lovely little tank tho , going to buy a few more

rottie 11 · 21-08-2015 02:17PM

JH_raheny wrote: »

Stick it in the freezer for 15 minutes and try again

Il give that a go. Thanks

Hellrazer · 21-08-2015 06:53PM

Just a random thought since this is the general discussion thread.

What would people think about a Vape friendly establishment thread.
The idea I had is that everyone in their area posts about pubs etc that are vape friendly.

One of my locals used to be and now its not and the other one is fine--would be great if we had an idea about where is a good place for a pint etc.

Trond · 22-08-2015 12:39AM

Hellrazer wrote: »

Just a random thought since this is the general discussion thread.

What would people think about a Vape friendly establishment thread.
The idea I had is that everyone in their area posts about pubs etc that are vape friendly.

One of my locals used to be and now its not and the other one is fine--would be great if we had an idea about where is a good place for a pint etc.

Well I'll start with an unfriendly one.....Kehoe's off Grafton st. They have a no vaping sign :mad:

To be honest though I always vape outside wherever i am. That and the obvious sneaky one in the jacks.

Shinobollo · 22-08-2015 12:21PM

Trond wrote: »

Well I'll start with an unfriendly one.....Kehoe's off Grafton st. They have a no vaping sign :mad:

To be honest though I always vape outside wherever i am. That and the obvious sneaky one in the jacks.

I think it'd be a great idea. Would be inclined to keep the friendlies and unfriendlies in separate threads to avoid confusion.
Reckon it would be worth keeping the "Friendly" thread as a sticky.

Hellrazer · 22-08-2015 04:10PM

Ok someone want to start a thread?

Maybe do it in a standard format?

bagels · 22-08-2015 09:21PM

rottie 11 wrote: »

Back using my nautilus now because I can't open my gs air it's totally jammed

JH_raheny wrote: »

Stick it in the freezer for 15 minutes and try again

rottie 11 wrote: »

Il give that a go. Thanks

Did you get it open?
If not, try placing it in a cup of boiling water for 5 minutes. That should cause expansion of the metal and loosen up the threads.

youdipstick · 24-08-2015 09:46AM

https://www.youtube.com/watch?v=YdnNfJpjfCU

rottie 11 · 24-08-2015 02:27PM

bagels wrote: »

Did you get it open?
If not, try placing it in a cup of boiling water for 5 minutes. That should cause expansion of the metal and loosen up the threads.

No still haven't got it open. When I try opening it , it's the glass that starts screwing off instead of the bottom piece. Il give what you said a go but I think it's jammed forever lol

24-08-2015 03:03PM

Anybody have an Xcube II?
I'm having no luck with it in temperature mode, just wondering if anyone has had any issues with it.

moleyv · 24-08-2015 03:26PM

rottie 11 wrote:

No still haven't got it open. When I try opening it , it's the glass that starts screwing off instead of the bottom piece. Il give what you said a go but I think it's jammed forever lol

I used to always have a pliers handy.

One day that wouldn't work, so I got one of the replacement stainless tanks, smashed the original pyrex one with a hammer, and swapped in the stainless one.

It always seemed to open a bit easier than the original too.

Glebee · 24-08-2015 05:09PM

Glebee wrote: »

Just had the first blast on mine there now. fcuking hell, it nearly blew the head off me..... Defo will need to tone down the nic level, using 6mg and my head is spinning, Its like im after smoking my first Major again...

Picked up some 3mg juice for the ijust2 last week. House of Clouds - Dragonfire. Beautiful flavour, lovely clouds, an overall lovely juice. A massive difference since dropping down to 3mg . Can take full lung hits no problem. Too much clouds though to bring to the pub though, they would end up calling the fire services:D

Fratton Fred · 26-08-2015 09:33AM

Jenny Thalia wrote: »

Www.republicofvape.ie

You get a discount if ordering 5 of their brand of liquids, so I got five for 23.20 delivered, plus two free.

Is their own brand any good?

Trond · 26-08-2015 10:59AM

Picked up a packet Fiber Freaks No. 1 density yesterday. Its €6 with bestshop. Apparently its made with wood pulp. So far I think far better than the Japanese cotton Ive been using.

Used it in a subtank mini and a magma so far and the different is v noticeable. Worked perfectly from the outset unlike the other cotton which Ive always felt requires a breaking in period.

http://www.thebestshop.eu/shop/diy/559-fiber-freaks.html

Fratton Fred · 26-08-2015 11:44AM

Trond wrote: »

Picked up a packet Fiber Freaks No. 1 density yesterday. Its €6 with bestshop. Apparently its made with wood pulp. So far I think far better than the Japanese cotton Ive been using.

Used it in a subtank mini and a magma so far and the different is v noticeable. Worked perfectly from the outset unlike the other cotton which Ive always felt requires a breaking in period.

http://www.thebestshop.eu/shop/diy/559-fiber-freaks.html

It is good.

I picked up a pack from Cigatec and there is no taste off the fibre at all.

EGriff · 26-08-2015 05:42PM

Fratton Fred wrote: »

Is their own brand any good?

They're pretty spot on, the ones I've tried anyway. Double dip is lovely, cola bottles and pear drops taste like their namesakes.

Postie pats has a bit too much menthol for me, but I can't remember what the sweets tasted like.

moeblogs · 26-08-2015 06:32PM

pretty cool
https://youtu.be/bjdEZ5cfMkk

Trond · 27-08-2015 11:01AM

Even though I do enjoy building coils those pre made kanger coils for the Sub Tank are a god send.

Managed to drunkenly get two of them into my Magma, wicked them with fiber freaks came out at 0.4ohms. Absolutely cracking vape. Delighted as id sort left the dripping alone for a few months there.

EGriff · 27-08-2015 01:15PM

Trond wrote: »

Even though I do enjoy building coils those pre made kanger coils for the Sub Tank are a god send.

Managed to drunkenly get two of them into my Magma, wicked them with fiber freaks came out at 0.4ohms. Absolutely cracking vape. Delighted as id sort left the dripping alone for a few months there.

You can get 50 packs of pre built coils on fasstech for a euro or two. Very handy for drippers.

Trond · 27-08-2015 02:44PM

EGriff wrote: »

You can get 50 packs of pre built coils on fasstech for a euro or two. Very handy for drippers.

I think I have a bag of old ones in my "sh*te i bought from fasttech" drawer. Found 2 metres silca in there the other day!

Obviously the kanger ones are a bit dearer but I don't mind paying it. I'll still make the majority of what I use. After a feed of pints it just wasn't an option the other night!

NegativeCreep · 27-08-2015 04:07PM

Anyone know how long it takes for things to come from GearBest using standard post? I want my iJust 2 now

Trond · 27-08-2015 04:11PM

NegativeCreep wrote: »

Anyone know how long it takes for things to come from GearBest using standard post? I want my iJust 2 now

The shi*ty fake coils I bought off them took about 5 weeks.

(their mods are grand though!)

JH_raheny · 27-08-2015 05:14PM

NegativeCreep wrote: »

Anyone know how long it takes for things to come from GearBest using standard post? I want my iJust 2 now

About 3 weeks

youdipstick · 30-08-2015 08:48AM

http://irishvape.com/product/evic-mini-kit-by-joyetech/

https://www.youtube.com/watch?v=IjhI_QEC6GQ

General Discussion on Vendors, Devices etc.

Comments

Welcome!