Amiko Alien2 / SAB / GM / ST7162 ENIGMA Discussion Thread

Nforce · 19-07-2014 01:53PM

What are the FTP login credentials for the new OpenATV image?

hallo dare · 19-07-2014 02:01PM

Nforce wrote: »

What are the FTP login credentials for the new OpenATV image?

Username :root
Password :pkteam

Nforce · 19-07-2014 02:03PM

Thanks!

kc66 · 19-07-2014 03:43PM

Just to show what I have tried here are some pics starting from the beginning, new image (Freshpots Hyperion V4).

Device connected:

Enable Driver:

Restart wifi:

Search for access points:

Then I did a full reboot and it is now able to detect the device and access points but cannot connect to them.

Detecting APs in the wizard, but when I select one it just exits:

Enabled in Setup-> system-> Network menu:

Run the wizard and I get this:

Tried enabling drivers again, but makes no difference:

I have also entered wifi details manually but it doesn't work.

Nowso · 19-07-2014 03:48PM

its not a big issue but id use wifi in the frontal usb where its not getting blocked as much

try going into network and re enter the ssid and password and select the correct encryption not using the wizard and then restart network from there

givecredit · 19-07-2014 04:49PM

same ol sh1te wrote: »

Cheers, itching to try this

Remember its a BETA image.

Since i installed it at 6pm yesterday until 10am this morning it had 4 online updates. Its work in progress. But for a beta its very stable.

No need for reflash to update image.

Go to setup/software management/software update to update image.

topper1978 · 19-07-2014 06:13PM

Flashed give credits latest OpenATV 4.1 image. Enigma would not boot up. Anyone else have this issue? Followed the instruction to the letter.

hallo dare · 19-07-2014 06:21PM

topper1978 wrote: »

Flashed give credits latest OpenATV 4.1 image. Enigma would not boot up. Anyone else have this issue? Followed the instruction to the letter.

Worked for me. Flash again

Technofobe · 19-07-2014 08:16PM

kc66 wrote: »

it appears to be RALINK RT5370. Yes it works in spark.

May sound a bit mad but when your trying the wizard have you tried other keys to enter like the green button as sounds like maybe a mapping issue with the remote and the ok key is exiting

Ok I agree it does sound a bit mad ok :-)

topper1978 · 19-07-2014 09:16PM

hallo dare wrote: »

Worked for me. Flash again

Tried 3 times with no joy. My back up image flashed with no issue. Weird?

hallo dare · 19-07-2014 09:18PM

topper1978 wrote: »

Tried 3 times with no joy. My back up image flashed with no issue. Weird?

And you're using a fat32 usb with an enigma2 folder in the root of the usb with both files in the folder?

topper1978 · 19-07-2014 09:23PM

hallo dare wrote: »

And you're using a fat32 usb with an enigma2 folder in the root of the usb with both files in the folder?

Yes and the box is telling me it successfully updated. When I reboot in enigma nothing happens. Starting appears on the screen.......... The usb is works as I've used it to flashother images before and I successfully reflashed by backup image from it.

same ol sh1te · 19-07-2014 09:29PM

Format the usb key

hallo dare · 19-07-2014 09:53PM

topper1978 wrote: »

Yes and the box is telling me it successfully updated. When I reboot in enigma nothing happens. Starting appears on the screen.......... The usb is works as I've used it to flashother images before and I successfully reflashed by backup image from it.

Do you have an alien 2 box or an alien 2+ box? Probably doesn't matter, but worth asking.

topper1978 · 19-07-2014 09:59PM

same ol sh1te wrote: »

Format the usb key

That worked, thanks for the help.

givecredit · 20-07-2014 11:47AM

To update openATV 4.1 backup go to Menu/Setup/Software Management/Software Update.

Major update last night.

same ol sh1te · 20-07-2014 01:13PM

Gave openATV a spin. It's going to be amazing but is far too buggy to be a daily runner just yet. I struggled and failed to get Oscam working, CrossEPG crashed and it sometimes booted to a blank screen and needed a channel change for the tuner to work. I'll give it another go in a few weeks.

cyndale · 20-07-2014 09:19PM

cyndale wrote: »

I've been using FreshPots Hyperion V4 image and it has suddenly got very 'buggy'!

It gets stuck on a channel and no amount of pushing buttons on the remote will shift it. I have turned it off and back on again and it works for a while again. When it is stuck on a channel it works perfectly except I can't change the channel or change the volume! Reverted to Spark for the moment!:eek:

I've reverted to FreshPots first Hyperion V4 (March) image and it has been as steady as a rock! Here's hoping!

givecredit · 22-07-2014 08:39AM

same ol sh1te wrote: »

Gave openATV a spin. It's going to be amazing but is far too buggy to be a daily runner just yet. I struggled and failed to get Oscam working, CrossEPG crashed and it sometimes booted to a blank screen and needed a channel change for the tuner to work. I'll give it another go in a few weeks.

Yes, I experience the Blank Screen too. It takes an extra circa 10secs for picture to kick in after rebooting sometimes.

Oscam and crossepg work fine for me.

witnessmenow · 22-07-2014 08:49AM

That openATV looks really nice

pistolpetes11 · 22-07-2014 10:13AM

givecredit wrote: »

To update openATV 4.1 backup go to Menu/Setup/Software Management/Software Update.

Major update last night.

Is the VFD display working on it now ?

gleannboy · 22-07-2014 09:48PM

Having trouble with oscamm in open ATV4.1 anyone else?

same ol sh1te · 22-07-2014 10:11PM

gleannboy wrote: »

Having trouble with oscamm in open ATV4.1 anyone else?

Struggled and failed with it myself but we cannot discuss it here

championc · 23-07-2014 04:31PM

pistolpetes11 wrote: »

Is the VFD display working on it now ?

No joy

It just says "boot" the whole time. It's the only flaw that I have noticed so far

hallo dare · 23-07-2014 05:01PM

championc wrote: »

No joy It just says "boot" the whole time. It's the only flaw that I have noticed so far

Mines showing all the info, is the issue with the AA2+?

same ol sh1te · 23-07-2014 05:03PM

hallo dare wrote: »

Mines showing all the info, is the issue with the AA2+?

No, there are 3 revision boxes, AA, AA+ and AA+ with new VFD

givecredit · 23-07-2014 07:17PM

givecredit wrote: »

Yes, I experience the Blank Screen too. It takes an extra circa 10secs for picture to kick in after rebooting sometimes.

Oscam and crossepg work fine for me.

The blank screen issue has been fixed in last nights update. Image doing all I want it to do now.

same ol sh1te · 23-07-2014 07:24PM

givecredit wrote: »

The blank screen issue has been fixed in last nights update. Image doing all I want it to do now.

I see in other places lots of reports of oscam problems, this is a major deal breaker for me. I'll flash it again next time I get the time.

How is the sound? I use SPDIF and use the modded audio.elf file and the auto volume plugin, do I need it with this? Is it compatible?

givecredit · 23-07-2014 08:38PM

same ol sh1te wrote: »

I see in other places lots of reports of oscam problems, this is a major deal breaker for me. I'll flash it again next time I get the time.

How is the sound? I use SPDIF and use the modded audio.elf file and the auto volume plugin, do I need it with this? Is it compatible?

Oscam is fine. Many having problems because ATV do things differently. Its a learning process.

I use HDMI for audio.

championc · 24-07-2014 02:14PM

Whey hey, OpenATV rocks !!! They have fixed the VFD for the AA2+ and for newer versions of the AA too. Here's a photo of the AA2+ above an AA2, both displays being correct (OK, I know the time is wrong on one of them)

Amiko Alien2 / SAB / GM / ST7162 ** ENIGMA ** Discussion Thread

Comments

Amiko Alien2 / SAB / GM / ST7162 ENIGMA Discussion Thread