Arcade & Retro Repairs & Mods, all new recipe, with no added MSG...

Doge · 23-12-2011 08:18PM

weeder wrote: »

just sussed this myself, does anyone remember the recall of the power cables? the reason was the power jack was soldered like a piece of ****, just hit off the power cord plugging in the ethernet cable and sure enough it shorted, luckily an easy out fix

edit: http://llamma.com/xbox/Repairs/xbox%20power%20supply%20repair%20tutorial.htm
link for anyone whos interested

That god damn link prompted me to embed this clip:

https://www.youtube.com/watch?v=HbPDKHXWlLQ

Doge · 31-12-2011 12:50AM

o1s1n wrote: »

The buttons can be put aside for a moment as the main issue was the D pad. I have a crap load of Megadrive pads..really really loads. So I thought it was just going to be a matter of switching the D pad rubber out. I tried another pad rubber and it had the same issue - ****e, must be the PCB. Here's where I ran into even more trouble. See all of my other multiple pads are the ones with red start buttons. I though the button colour was the only difference - apparantly not. The PCB in the controller is a different shape.

I bought a model 2 controller recently (1993 on the PCB) which has the Red Start button,
and the d-pad feels horribly loose like you described! :eek:

I'd love to know is it just due to wear or were they always that bad, and were just used to them as kids.

In fact the dealextreme controller's d-pad has far better spring to it.

Popped the DX one open too and it seems to use rubbers also.

o1s1n wrote: »

Sounds like a third party controller. Does it look like the official Sega 6 button pad ?

Everyone should be using a pad like this. They really lasted and should be 100% functional (within reason). On the other hand the 3 button ones really won't work well today...unless you had the patience and multiple sacraficial controllers like I did above.

I think I may have to invest in one of those babies.

Do you know how it compares in size to the Dealextreme/cheapo chinese ones?

I find the DX ones a bit too small in my hands.

I'm glad you went crazily in-depth with those posts, found them very useful.

Pyongyang · 12-01-2012 09:38AM

https://www.youtube.com/watch?v=9bJdVAz8Ai0

Useful.

o1s1n · 12-01-2012 10:09AM

Good guide. MVS collecting really has to be up there among the most perilous when it comes to bootlegs.

Damn accent drives me insane though, he keeps doing that Australian/Californian/D4 upswing at the end of his setences. It's like every statement is a question. Argh!!!! :mad:

Pyongyang · 12-01-2012 10:24AM

o1s1n wrote: »

Good guide. MVS collecting really has to be up there among the most perilous when it comes to bootlegs.

I'd put STV collecting right up there. I nearly got stung three times trying to buy Soukyugdigujlksdjghsdlkjghsdgkhlkqerrkgldxrentai and Cotton Boomerang (twice from two different people).

STD collecting is the most perilous though. :pac:

mrmrbungle · 21-01-2012 07:42PM

has anyone repaired a disc not spinning problem in a sega multi-mega? i have two of them with the same problem, the laser tries to read but the disc never spins. i'm pretty handy with tech but have no idea whats wrong.

Myrddin · 21-01-2012 07:44PM

mrmrbungle wrote: »

has anyone repaired a disc not spinning problem in a sega multi-mega? i have two of them with the same problem, the laser tries to read but the disc never spins. i'm pretty handy with tech but have no idea whats wrong.

If the laser is trying to read, but the disc isn't spinning, that sounds like the motor is kaput.

mrmrbungle · 21-01-2012 07:54PM

EnterNow wrote: »

If the laser is trying to read, but the disc isn't spinning, that sounds like the motor is kaput.

any chance you know where to get a spare?

Myrddin · 21-01-2012 07:56PM

mrmrbungle wrote: »

any chance you know where to get a spare?

No idea, it's possible that Sega used the same motor from the Mega-CD 2...but you'd have to check it out. Sega16 forums may be of some help

mrmrbungle · 21-01-2012 07:58PM

EnterNow wrote: »

No idea, it's possible that Sega used the same motor from the Mega-CD 2...but you'd have to check it out. Sega16 forums may be of some help

thanks, i'll check em out

Pyongyang · 23-01-2012 10:24PM

Quick video demonstrating my retro console capture setup.

https://www.youtube.com/watch?v=RgZ7mVHfMMc

Steve X2 · 31-01-2012 09:39PM

I replaced the screen on one of those Blaze/AtGames Sega handhelds(you know, the crappy ones).

There really isnt much to them at all. Not that I was expecting loads of rom chips or anything but I was a bit disappointed when I opened it up.

Lots more pics(and full size versions) and a quick vid of the screen/backlight here:
http://www.retrovia.ie/showthread.php/8588-Blaze-AtGames-Sega-Megadrive-handheld

.

Retr0gamer · 01-02-2012 01:23AM

Here's my guide to replacing a dud laser on a Philips CDI 450:

http://lifein16bit.blogspot.com/2012/01/cdi-450-repair-laser-replacement.html

Myrddin · 01-02-2012 09:04AM

@Steve - Is that where you got the screen for the gameboy/raspberry project?

Steve X2 · 01-02-2012 12:13PM

EnterNow wrote: »

@Steve - Is that where you got the screen for the gameboy/raspberry project?

No, I don't think the screen would work on the Rasp Pi, plus the screens on these things are really crappy.
I actually have a few screens that might work on my RaspiBoy. Some from blackberry phones and some from Nokia phones.

Retr0gamer · 01-02-2012 01:38PM

The innards of the Megadrive have been all on one chip since the Majesco Genesis 3 so you won't see lots of chips in these megadrive re-releases.

Steve X2 · 02-02-2012 02:24AM

I was talking to a friend the other day and she was telling me her Game Boy Advance SP had stopped playing any kind of audio. I remembered I had one with this problem as well but had just put it to one side as I'd gotten a few GBA's that day.
I told her I didn't have a fix for it and after a bit of time online I still couldn't find any guide or info(I'm sure there is something online but I just couldn't find it). So I decided to have a go at fixing my one and if that worked I would fix hers.

Anyway, long story short I fixed my one and then made a repair guide using here one. It was a simple enough fix, once I found the problem that is.

I tried to make the guide as detailed as possible without going crazy and make it so it was easy to do for beginners and not annoyingly simple for more techy folk(like the peeps who are probably reading this in the retro repair section).

Anyway, here's a link to the guide.

http://www.retrovia.ie/showthread.php/8643-Game-Boy-Advance-SP-No-Audio-Sound-Fix

.

CathalDublin · 03-02-2012 09:25AM

Partly fixed my ghosts n goblins bootleg PCB last night
Fault:No picture, EPROMs 1-7 getting extremely hot.
Solution:replace, reprogram EPROM 1-7

There is one more small graphic fault I've to work on

Then next up is a robocop missing robocop and the backgrounds but the splash screens work

Dale Parish · 05-02-2012 06:24PM

bought a A1200 but floppies get stuck in it, I have to pull them out

Any ideas what I can do to fix this?

weeder · 11-02-2012 01:02AM

i put a new 72 pin into my nes last year and its pretty much just been sat on a shelf since, I sold it on adverts the other day and took payment, before sending it i tested it and i was having dodgy 72 pin issues so i sent the guy a refund, what could be causing this? is it just dirt? Ive only got 1 cart i can test in it so could it be that?

o1s1n · 11-02-2012 01:11AM

Did you leave a cart in it when it was sitting unused?

weeder · 11-02-2012 09:51PM

not that i can remember anyway.

Myrddin · 11-02-2012 09:56PM

Clean the pins that the 72 pin connects onto, there could be a bad contact there somewhere. Also, give all the game cart pins a clean too. I got a Ninja Gaiden there ages ago that I thought was broke, it wouldn't boot at all until I cleaned the connector pins with a hand soap someone here recommended. Done the trick.

Optimus Prime · 14-02-2012 04:05PM

yeh it could be the games, you need to clean all games before you put them in a nes, some of them do be filthy. removing the region pin too can help if you get a nes constantly flashing on and off.

weeder · 15-02-2012 02:02AM

EnterNow wrote: »

Clean the pins that the 72 pin connects onto, there could be a bad contact there somewhere. Also, give all the game cart pins a clean too. I got a Ninja Gaiden there ages ago that I thought was broke, it wouldn't boot at all until I cleaned the connector pins with a hand soap someone here recommended. Done the trick.

hand soap? how would i apply and remove that without destroying the board in the process? cotton bud im thinking?

Myrddin · 15-02-2012 10:28AM

weeder wrote: »

hand soap? how would i apply and remove that without destroying the board in the process? cotton bud im thinking?

I took the cart pcb out of the cart, applied a tiny drop of the detergent onto the cotton bud, dab of warm water & cleaned each pin that way. Took ages, but seriously nothing else worked. After I was finished, the cart booted without a hitch.

CathalDublin · 15-02-2012 11:36AM

I always clean the edge connector pins on my carts and boards with isopropanol on a cotton bug.
But you could also try cleaning the pins with wd40 on a cotton bud or with an eraser (rubber), the rough side works better

Optimus Prime · 15-02-2012 03:42PM

I use steel wool. then medical wipes, my bro is diabetic so has loads of em, then clean that off with a bud. 100+ nes games now and they all work perfect. i do the same on megadrive, snes etc. I always clean them before i put them in my consoles.

CathalDublin · 16-02-2012 10:18AM

Dr Bob · 16-02-2012 11:49AM

keithgeo wrote: »

I use steel wool. then medical wipes, my bro is diabetic so has loads of em, then clean that off with a bud. 100+ nes games now and they all work perfect. i do the same on megadrive, snes etc. I always clean them before i put them in my consoles.

I may have pressed mediswabs into use for cart cleaning on occasion as well

Arcade & Retro Repairs & Mods, all new recipe, with no added MSG...

Comments