Advertisement
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

The "Today I did something to my car" thread

1…7475777980…325

Comments

  • #2282
    vectra
    Registered Users, Registered Users 2 Posts: 15,672 ✭✭✭✭vectra


    Gary ITR wrote: »
    +1 well done dude

    I did the same thing on my Mk2 Golf, I then went over it with shoe polish of all things and it was black until I got rid of the car

    LOL
    I remember doing my Tyres with shoe polish :P


  • #2283
    Gary ITR
    Closed Accounts Posts: 16,800 ✭✭✭✭Gary ITR


    vectra wrote: »
    LOL
    I remember doing my Tyres with shoe polish :P

    If it works it works!


  • #2284
    -Corkie-
    Closed Accounts Posts: 10,021 ✭✭✭✭-Corkie-


    Gary ITR wrote: »
    Do what I did then lol!

    Its back on again after a lot of swearing...:)


  • #2285
    Gary ITR
    Closed Accounts Posts: 16,800 ✭✭✭✭Gary ITR


    -Corkie- wrote: »
    Its back on again after a lot of swearing...:)

    Well I just got away with it, Mick in Urban was/is the ultimate professional, if he'd have seen me I'd have got a kick in the hole, freebie job or not


  • #2286
    Fiona
    Registered Users, Registered Users 2 Posts: 2,363 ✭✭✭Fiona


    Discovered that my fuel relay switch is fooked after I just got a new fuel pumped installed :mad:


  • Advertisement
  • #2287
    Gary ITR
    Closed Accounts Posts: 16,800 ✭✭✭✭Gary ITR


    mrs crilly wrote: »
    Discovered that my fuel relay switch is fooked after I just got a new fuel pumped installed :mad:

    That's a pian in the arse, problem solved now though?


  • #2288
    Fiona
    Registered Users, Registered Users 2 Posts: 2,363 ✭✭✭Fiona


    Gary ITR wrote: »
    That's a pian in the arse, problem solved now though?

    No himself car got towed home today by the aa man, he took out the relay box and the back seat and was checking out the pump, pump is fine cos it's only new, ruled out alternator issue and starter motor.

    He says it's an intermittent problem with the switch, was saying something about a problem with the switching sensor for the relay??

    He was of the opinion that my fuel pump might not have need to be changed after all, going to have to have a 'friendly' chat with my mechanic to find out what investigative work he did before he changed the pump.

    Think I might bring it to Courtneys on the North St, they come highly recommended, pain in the arse to get to though. The AA man did tell me that the fella who put my alarm on my E30 Gary is a whiz at bmw electrics so I will drop him a text as well.

    Fooking hate fooking stupid cars right now :mad::mad::mad::mad::mad:


  • #2289
    dgt
    Closed Accounts Posts: 12,978 ✭✭✭✭dgt


    Winter salt rusts cars...

    This is a pig of a job to do. A pig because the bolt is usually seized in the arm and unless you have a cutting torch, forget it!

    Image1812.jpg

    Image1813.jpg

    Image1816.jpg

    Image1825.jpg

    Image1828.jpg

    Image1829.jpg

    All the rustproofing was done by me. When I got it first, it had none atall. The back was going crusty, I got it in time :eek:
    Image1831.jpg

    I think the axle has had it :rolleyes: have a few to choose from and put in so I'm not too worried. Just the job to do this again :mad:

    Just need to put in the bigger arb, new handbrake cables, fix the trailer socket and job done :)

    That old arm ate up a relatively good tyre too :mad:


  • #2290
    PaulKK
    Registered Users, Registered Users 2 Posts: 2,263 ✭✭✭PaulKK


    -Corkie- wrote: »
    Its back on again after a lot of swearing...:)

    The ones on the Passat are a right PITA, they should do them like BMW and have a handy little flap in the undertray that you just open with one screw to reveal the sump plug:

    oil_10.jpg


  • #2291
    -Corkie-
    Closed Accounts Posts: 10,021 ✭✭✭✭-Corkie-


    I suppose one could improvise and cut open a small flap.


  • Advertisement
  • #2292
    conzy
    Subscribers Posts: 6,408 ✭✭✭conzy


    I put the car up on a lift to check out my rear springs, it appears to be sitting about 10mm lower on one side and cracked springs in the E46 is common but I couldnt see any problems :confused: I might get the Eibach Pro Kit anyway to stiffen up the suspension a bit. Painted the hubs and calipers silver while it was on the lift, makes it look a lot cleaner


  • #2293
    PaulKK
    Registered Users, Registered Users 2 Posts: 2,263 ✭✭✭PaulKK


    conzymaher wrote: »
    I put the car up on a lift to check out my rear springs, it appears to be sitting about 10mm lower on one side and cracked springs in the E46 is common but I couldnt see any problems :confused: I might get the Eibach Pro Kit anyway to stiffen up the suspension a bit. Painted the hubs and calipers silver while it was on the lift, makes it look a lot cleaner

    Is she lower on the drivers side?

    They all sit a little lower on that side, full fuel tank ;)


    -Corkie- wrote: »
    I suppose one could improvise and cut open a small flap.

    It'd probably save a lot of swearing alright :D


  • #2294
    conzy
    Subscribers Posts: 6,408 ✭✭✭conzy


    PaulKK wrote: »
    Is she lower on the drivers side?

    They all sit a little lower on that side, full fuel tank ;)

    Yeah 2/3 of the tank or more is on the drivers side but theres only 30 litres or so in it. The main reason I noticed that something was not right was when I went for a spin yesterday with a few of the lads at midway and going over a hump in the road it would bottom out in the back and the wheels would rub the arches :o


  • #2295
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    conzymaher wrote: »
    I put the car up on a lift to check out my rear springs, it appears to be sitting about 10mm lower on one side and cracked springs in the E46 is common but I couldnt see any problems :confused: I might get the Eibach Pro Kit anyway to stiffen up the suspension a bit. Painted the hubs and calipers silver while it was on the lift, makes it look a lot cleaner

    Pics or GTFO :P


  • #2296
    conzy
    Subscribers Posts: 6,408 ✭✭✭conzy


    MetzgerMeister wrote: »
    Pics or GTFO :P

    I didnt go red or green or anything mad! Just looks better than rust :)

    2c634.jpg


  • #2297
    [Deleted User]
    Posts: 0 ✭ [Deleted User]


    Great job! It looks like electroplating.

    Did you use primer and lacquer too or just paint?


  • #2298
    EPM
    Closed Accounts Posts: 13,822 ✭✭✭✭EPM


    Decided to swap from 18s to 17s, just put my wanted advert up:(

    Needs to be done to increase comfort as much as possible. Also looking at leather recaros too if they'll fit.


  • #2299
    Top Dog
    Registered Users, Registered Users 2 Posts: 4,180 ✭✭✭Top Dog


    EPM wrote: »
    Decided to swap from 18s to 17s, just put my wanted advert up:(

    Needs to be done to increase comfort as much as possible. Also looking at leather recaros too if they'll fit.
    Want a set of 16" steels? I'm sure I could convince my dad that 18's would look well on his Octy .... then again, probably not. He didn't even notice that I'd gone from 17's to 20's :rolleyes:

    Curious though - what profile are the tyres? Used to have 18's on the Laguna with 45 series tyres, and didn't find them much different to the factory 17's over 15k miles (apart from the 18's being stronger and not buckling every other month)


  • #2300
    vectra
    Registered Users, Registered Users 2 Posts: 15,672 ✭✭✭✭vectra


    EPM wrote: »
    Decided to swap from 18s to 17s, just put my wanted advert up:(

    Needs to be done to increase comfort as much as possible. Also looking at leather recaros too if they'll fit.

    Don't do anything drastic like that just yet. Come and drive my car first. You decide then what's best for you ;)


  • #2301
    whyulittle
    Registered Users, Registered Users 2 Posts: 3,878 ✭✭✭whyulittle


    whyulittle wrote: »
    Bloody annoying, I need my horn!

    Fixed with a good frustrating thump of the steering wheel today! :D


  • Advertisement
  • #2302
    EPM
    Closed Accounts Posts: 13,822 ✭✭✭✭EPM


    Top Dog wrote: »
    Want a set of 16" steels? I'm sure I could convince my dad that 18's would look well on his Octy .... then again, probably not. He didn't even notice that I'd gone from 17's to 20's :rolleyes:

    Curious though - what profile are the tyres? Used to have 18's on the Laguna with 45 series tyres, and didn't find them much different to the factory 17's over 15k miles (apart from the 18's being stronger and not buckling every other month)

    Same width, would go from a 40 to 45 profile. 16s won't work with the brakes I'm currently bidding on...


  • #2303
    Gary ITR
    Closed Accounts Posts: 16,800 ✭✭✭✭Gary ITR


    EPM wrote: »
    Same width, would go from a 40 to 45 profile. 16s won't work with the brakes I'm currently bidding on...

    Why are you going bigger brakes?


  • #2304
    Top Dog
    Registered Users, Registered Users 2 Posts: 4,180 ✭✭✭Top Dog


    EPM wrote: »
    Same width, would go from a 40 to 45 profile. 16s won't work with the brakes I'm currently bidding on...
    Oooohhh big brakes - loverly :cool:


  • #2305
    dgt
    Closed Accounts Posts: 12,978 ✭✭✭✭dgt


    EPM wrote: »
    Same width, would go from a 40 to 45 profile. 16s won't work with the brakes I'm currently bidding on...

    Leon Cupra R brakes?

    Brakes1.jpg


  • #2306
    EPM
    Closed Accounts Posts: 13,822 ✭✭✭✭EPM


    Gary ITR wrote: »
    Why are you going bigger brakes?

    Watch this space;)


  • #2307
    vectra
    Registered Users, Registered Users 2 Posts: 15,672 ✭✭✭✭vectra


    EPM wrote: »
    Same width, would go from a 40 to 45 profile. 16s won't work with the brakes I'm currently bidding on...


    Hmmm. I saw some lovely big brakes for sale today :P


  • #2308
    EPM
    Closed Accounts Posts: 13,822 ✭✭✭✭EPM


    vectra wrote: »
    Hmmm. I saw some lovely big brakes for sale today :P

    You might know the advert...


  • #2309
    conzy
    Subscribers Posts: 6,408 ✭✭✭conzy


    MetzgerMeister wrote: »
    Great job! It looks like electroplating.

    Did you use primer and lacquer too or just paint?

    God no! Just plastered on a load of hammerite :p I dont think other paint would last as well, hammerite goes on well on that rough metal too. Will get better pics in the daylight next weekend. Just waiting on my smoked indicators and angel eyes now :)


  • #2310
    CianRyan
    Registered Users, Registered Users 2 Posts: 14,730 ✭✭✭✭CianRyan


    dgt wrote: »
    Leon Cupra R brakes?

    Brakes1.jpg

    They look like people.


  • Advertisement
  • #2311
    eringobragh
    Registered Users, Registered Users 2 Posts: 3,661 ✭✭✭eringobragh


    CianRyan wrote: »
    They look like people.

    I really shouldn't:

    wigflipsaywhat.jpg


This discussion has been closed.
Advertisement