Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Manuals / Request a manual

1235737

Comments

  • Closed Accounts Posts: 2 ian07


    Great - thanks KoolKid!!!:)


  • Closed Accounts Posts: 1 Chapelfarmer


    Any chance of getting a copy of manual for astec 63. Have problem 61 also couple of contacts very sensitive.
    Thanks in advance.


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I sent you a pm with that.
    61 call engineer is low battery.
    This is the battery you need
    98-138-thickbox.jpg
    Any problems you know where we are.;)


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Any chance of getting a copy of manual for astec 63. Have problem 61 also couple of contacts very sensitive.
    Thanks in advance.

    Sent you a P.M


  • Closed Accounts Posts: 2 Rsethi


    I have a Domonial CMI8 Panel and I also have the TCU LCD keypad. I am trying to program the system using the TCU keypad. I understand that the programming using the TCU keypad is extremely difficult and time consuming but in the absence of DOMOPC software and the cable, this is the only option I have.

    I have been able to reset the system and load default values thereby setting the engineer code to default. I am able to get into the programming mode using the engineer code.

    I have the installation manual for the panel and the code reference for the TCU module. However I am at loss on how and what code to enter. It seems like I am missing a manual on how to program using the TCU keypad. It seems that the code reference, I have is some sort of the apendix to the programming manual.

    It would be great if any of you could provide me a programming manual for the TCU keypad. Your help is much appreciated.

    Rsethi


  • Registered Users Posts: 88 ✭✭Morak Thun


    Hi all,

    Looking for a Aritech CS350 Engineer Manual if anyone can oblige.

    Many thanks in advance


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Rsethi wrote: »
    I have a Domonial CMI8 Panel and I also have the TCU LCD keypad. I am trying to program the system using the TCU keypad. I understand that the programming using the TCU keypad is extremely difficult and time consuming but in the absence of DOMOPC software and the cable, this is the only option I have.

    I have been able to reset the system and load default values thereby setting the engineer code to default. I am able to get into the programming mode using the engineer code.

    I have the installation manual for the panel and the code reference for the TCU module. However I am at loss on how and what code to enter. It seems like I am missing a manual on how to program using the TCU keypad. It seems that the code reference, I have is some sort of the apendix to the programming manual.

    It would be great if any of you could provide me a programming manual for the TCU keypad. Your help is much appreciated.

    Rsethi

    Here is a link to the TCU keypad. Not sure if it is what your looking for.


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Morak Thun wrote: »
    Hi all,

    Looking for a Aritech CS350 Engineer Manual if anyone can oblige.

    Many thanks in advance

    Sent you a P.M


  • Registered Users Posts: 88 ✭✭Morak Thun


    altor wrote: »
    Sent you a P.M

    Many thanks for your help Altor.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Morak Thun wrote: »
    Many thanks for your help Altor.

    Your welcome, any problems let us know.


  • Closed Accounts Posts: 2 Rsethi


    altor wrote: »
    Here is a link to the TCU keypad. Not sure if it is what your looking for.

    This manual does not tell how to use the keypad for programming with the codes. I have this Code Reference document. But how do I use this document to program.

    Thanks for your help.


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Rsethi wrote: »
    This manual does not tell how to use the keypad for programming with the codes. I have this Code Reference document. But how do I use this document to program.

    Thanks for your help.

    I have never used this system before but from looking at the manual you provided it seems you enter engineering at the keypad and use the quick codes provided in the manual to program the system. Is the keypad programmed into the system ?


  • Moderators, Motoring & Transport Moderators Posts: 6,522 Mod ✭✭✭✭Irish Steve


    Need an install manual for this please if anyone has one, I have an 812 manual, but there are significant differences, and I need to find out why a wired PIR that is inhibited is causing an alarm when in full set, and the 812 manual is not close enough for this level of checking.

    For now, I've changed the zone status to unused, to see if that changes anything.

    Also if anyone has one, there's a 4/8CH VLA communicator in the board that is no longer being monitored, and I'd like to know what it can or can not do, and how to default reset that board, as it didn't default reset when the panel was defaulted recently due to a battery failure which it didn't recover from clean when the battery was replaced. The installer is no longer a registered installer, so we can't go down that route to get the info we need.

    Thanks

    Steve

    Shore, if it was easy, everybody would be doin it.😁



  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    The programming of the zones is the same on the 8/12. The dialer is for contacting a monitoring station. Not much programming in it to be honest. On the older types you could of got a text chip to allow it send a text. These where done away with when the 8/12 and the slot on dialer came out. You need to down power the system and remove the link then power it back up with link removed to default the panel if is not engineer locked.


  • Registered Users, Registered Users 2 Posts: 140 ✭✭scottyboy


    Hi

    I am looking for the installation manual for the HKC SW-1070 Securewave alarm. I have the engineers code and wish to install new PIR, RF contacts and 2 fobs.

    Many thanks in advance

    SB


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Sent you a P.M


  • Registered Users Posts: 226 ✭✭selfbuildkk


    Hi Guys first time post in this forum so hope im in the right spot, im looking for the manual for eircom phonewatch wireless alarm. Ive just moved into a new old house and the system doesnt stop beeping. Ive tried turning it off using the code and 30 secs later its off again.
    The alarm isnt monitored any more and i cant even work the menu to find out whats making it go off. Any help greatly appreciated. Thanks.


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Sent you a P.M


  • Closed Accounts Posts: 1 crbb


    Hi Koolkid, Believe it or not, I'm also looking for the Astec 63 dv Installation/ Enginner Manual

    Hope you can help!


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Sent you that. Any problems give us a shout.;)


  • Advertisement
  • Registered Users Posts: 5 megamax


    Hi all:

    I have a very old Scopetronic Vista 5 Alarm. It has worked great over the last number of years since we bought the house. I have added a remote keypad and extra sensors in that time. I did have an engineering manual but have mislaid it somewhere...Anyone got a link to a softcopy of same.

    thanks
    M


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    megamax wrote: »
    Hi all:

    I have a very old Scopetronic Vista 5 Alarm. It has worked great over the last number of years since we bought the house. I have added a remote keypad and extra sensors in that time. I did have an engineering manual but have mislaid it somewhere...Anyone got a link to a softcopy of same.

    thanks
    M

    Sent you a P.M


  • Registered Users Posts: 5 megamax


    PM returned.

    M


  • Closed Accounts Posts: 2 Buster cat


    Hi Koolkid, I'm looking for the Astec 63 d Installation/ Enginner Manual trying to reprogram panel

    thanks


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Sent you that.
    If you need any help with out give me a shout.


  • Closed Accounts Posts: 2 Buster cat


    Thanks got that :D


  • Registered Users Posts: 112 ✭✭paulhac


    Hi Koolkid, I'm looking for the HKC Securewatch Installation/ Engineer Manual
    I have lost power to the keypad and bell box.:)


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I sent you that manual.

    Any problems give us a shout.;)


  • Registered Users Posts: 112 ✭✭paulhac


    Cheers thanks for the manual Koolkid I'll try and sort it out.;)


  • Registered Users Posts: 2 smbutler


    Hi, looking for an Astec 63 installation Manual


  • Advertisement
  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Sent you that. if you need any help give us a shout.


  • Registered Users Posts: 2 smbutler


    KoolKid wrote: »
    Sent you that. if you need any help give us a shout.
    Much appreciated. Thanks.


  • Registered Users Posts: 15 thetowen


    Was wondering would anybody be able to send me Installation/ Engineer Manual for an Astec 63?


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    Sent you a P.M


  • Registered Users Posts: 6 episode1


    Hi

    I'm looking for the Astec 63dv Installation/ Engineer Manual. I'm Getting "battery" flashing in the bottom right corner of display and some times "61 call Engineer". I guess its just a case of replacing the battery but I could do with the Eng manual for guidance on how to do that.
    P.S do I also need an engineer code to change the battery?

    thanks


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I sent you that, any questions you know where we are.


  • Registered Users Posts: 5 megamax


    Hi All, I have a quick query re Scopetronic Vista 5 reset. I cannot remember the Engineer code or I may have changed it and cannot remember. I had it when I added some extra sensors and also an extra keypad. I received a manual a few weeks ago from this board and have read it from cover to cover.

    If I reset the engineer code via the LK1 oprocedure, does that reset all the settings (Passwords and Configuration) that may have been previously set up or will it reset the Engineer and user codes only.

    thanks


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    megamax wrote: »
    Hi All, I have a quick query re Scopetronic Vista 5 reset. I cannot remember the Engineer code or I may have changed it and cannot remember. I had it when I added some extra sensors and also an extra keypad. I received a manual a few weeks ago from this board and have read it from cover to cover.

    If I reset the engineer code via the LK1 oprocedure, does that reset all the settings (Passwords and Configuration) that may have been previously set up or will it reset the Engineer and user codes only.

    thanks

    It will reset the whole system back to factory defaults.


  • Registered Users Posts: 5 megamax


    Altor, PM sent


  • Advertisement
  • Registered Users Posts: 6 wolseley


    Can anyone help me, looking for a europlex identifier install and user manual.

    Much appreciated


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    wolseley wrote: »
    Can anyone help me, looking for a europlex identifier install and user manual.

    Much appreciated

    Sent you a P.M


  • Registered Users Posts: 6 wolseley


    Received the manuals
    Cheers Altor your a star!


  • Registered Users, Registered Users 2 Posts: 11,817 ✭✭✭✭altor


    wolseley wrote: »
    Received the manuals
    Cheers Altor your a star!

    Your welcome wolseley, any problems let us know ;)


  • Closed Accounts Posts: 1 Garr11


    Hi KoolKid, Could you please send us a copy of the engineer/installation manual for the Astec 63.
    Thanks,
    Garr11.


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    PMed you that.
    Any questions you know where we are.;)


  • Advertisement
  • Registered Users Posts: 3 scousekop


    Hi KoolKid, Could you please send us a copy of the engineer/installation manual for the Aritech CD 34
    Thanks a mil!


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    I sent you that. Any questions you know where I am.;)


  • Registered Users, Registered Users 2 Posts: 433 ✭✭coxy123


    Hi KoolKid, is there a SecureWatch install/engineers manual available? Thanks.


  • Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    Sent you that ;)
    Any questions give me a shout..


  • Moderators, Technology & Internet Moderators Posts: 4,621 Mod ✭✭✭✭Mr. G


    I lost my manual, could someone send me a HKC 812 Manual? Thanks


  • Advertisement
This discussion has been closed.
Advertisement