The WANTED Thread

101sean · 27-12-2010 12:28AM

I agree, sit back for a couple of months if you can, lot of panic buying going on at the moment I reckon. Otherwise, keep looking at dd or hope someone here offers you something.

Johro · 27-12-2010 02:05AM

101sean wrote: »

I agree, sit back for a couple of months if you can, lot of panic buying going on at the moment I reckon. Otherwise, keep looking at dd or hope someone here offers you something.

That's the plan

Yeah I saw a mint condition Pajero for sale on DoneDeal a little while back, taxed and tested, chrome bullbar and spots, nice looking jeep, located about ten miles from where I live. For a grand. I saw it at about 22:15, though it might be too late to ring and decided I'd ring first thing in the morning.
So I did, and they said 'oh sorry, that was sold late last night'.:(
Couple of people told me a Trooper would be better buy?
Something about parts being easier to get and it being more reliable. ?
Also, they reckon a 3.1 litre is more economical to run than say a 2.5 or 2.8?
Anyway, any offered for sale will be seriously considered.

Seanieke · 29-12-2010 04:49PM

I bouught some of them lights in Trim last week, 2 red ones for €15. You could give em a call, see would they do postage...

http://www.trimmotorfactors.com/cms/publish/homepage.shtml

billyskippy · 02-01-2011 10:03AM

Could anyone tell me where I could get a manual of Hitachi ex75ur5 digger?

Please help Im so frustrated with the german version!!

granpa · 02-01-2011 04:49PM

Could anyone tell me if there is anywhere that an old pull behind mower could be found , the type i mean would be like a single type gang mower for to be pulled . not a modern topper type,

GRANPA

KoNiT · 02-01-2011 08:17PM

Are you on about the cylinder type gang mower?

one here on done deal - but it's an old advert

http://www.donedeal.ie/for-sale/others/1673331

granpa · 02-01-2011 10:07PM

yes that would do if icould get one in need of repair as one one of the gangs would be plenty for me or an older type with only the one roller. thanks for your reply . granpa

marlyman · 03-01-2011 12:17AM

theyre available in every agri parts dealer in the country for peanuts. pm me with your location and ill put you onto one.

murph226 · 03-01-2011 11:18PM

I'm looking for a starter motor for a Deutz single cylinder aircooled engine, its a F1L210D engine.

The engine is currently in a boat and we do not know what it came out of originally, maybe a mini-digger or dumper or could have been driving a pump or compressor.

We've done alot of looking and can't find anything, worse again there is no numbers left on the motor itself.

Just wondering if anyone has any info on theis engine or where a starter could be got for it, the one we have has been reconditioned a few times and is really on its last legs.

Failing that, we might be interested in a similar engine complete, Yanmar, Lister Deutz etc, something around 20hp.

Thanks in advance Murph

101sean · 04-01-2011 10:14AM

I've been a bit slack of late and allowed wanted items to sit around in the main forum, done a bit of tidying up this morning.

Could posters please put simple wanted items straight in this thread in future. If you're not sure it should be here, pm me first.

If a wanted item generates some interesting discussion I'll be happy to move it to it's own thread.

Thanks
Sean
Forum moderator

thierrys other hand · 05-01-2011 07:03PM

hi,
anybody know where to download Hitachi EX30 (not dash2) manual from?
thanks

Seanieke · 05-01-2011 08:44PM

thierrys other hand wrote: »

hi,
anybody know where to download Hitachi EX30 (not dash2) manual from?
thanks

Any use?

http://www.hitachi-c-m.com/global/pdf/products/excavator/mini/ex30/KS-E029.pdf

thierrys other hand · 06-01-2011 12:36AM

unfortunatly thats just the sales brochure but good find and thanks for looking so quick;);). wish mine was as shiney as the one in the brochure

mayhem# · 06-01-2011 11:38AM

Looking for a late 90's Landrover Disco 7-seater if anyone has one for sale or knows of one.

terryjo · 08-01-2011 09:37PM

hi
im looking for a bull bar for a nissan navara 05 model,the old ones that come up as high as the bonnet not like the new pedestrian friendly small rubber coated ones,tnx

jennym2 · 10-01-2011 12:27PM

I love my jeep, but im in bad need for a fuel injector pump for a 1996 Bighorn, 3.1 Diesel. ANyone have any ideas? I've been on the phone to a load of breakers but they dont have the jap import (Electronic Fly by wire) version.
Any suggestions would be greatly appreciated

101sean · 10-01-2011 01:38PM

Try Milners for new http://www.milneroffroad.com/categories.asp?cID=410
Otherwise try UK breakers or get your pump rebuilt by a specialist here.

I've deleted the duplicate post in the old thread.

101sean · 10-01-2011 01:48PM

Mayhem, you still looking for one? There's one going up north - http://www.landroveraddict.com/smf/index.php?topic=392616.0

the drifter · 17-01-2011 01:12PM

Hi all

Chancing my arm here a bit...

Im looking for a used trye..its not for use.. its for some strenght & conditioning training.

I believe im looking or a 23r which is something like this

http://www.oursbiz.com/Products/b/72/Radial-OTR-Tyres-20-5R25-23-5R25-E-3-L-3--240838.jpg

tyre does not have to be new/road worthy...but cant have wires coming out of it...

im in the limerick area.

useeme · 18-01-2011 08:20PM

Looking for a drivers seat for an 04 Landcruiser LC120 commercial (irish).
The seat frame in mine is knackered.

Not to bothered about the upholstery as I can transfer it from the original one.

If anyone spots on please let me know.

DirtyDiesels · 21-01-2011 03:12AM

Does anyone know where i can get a roll of carpet to reline the inside of my jeep. the old carpet is tatty and smelly and just want to redo it...any ideas...

colm_mcm · 21-01-2011 08:32AM

I got the stuff for my shogun in my local carpet place.

mantua · 21-01-2011 09:19AM

Does anyone know where i can get a bullbar/ a-bar for a toyota landcruiser with landcruiser written on it! Have looked around but can't seem to find anything!!

Let me know if you know anyone that sells them!!!:)

ellewood · 21-01-2011 10:15AM

long shot here but broke 1 of these and a new one is nearly as much as the jeeps worth have tried several breakers and no joy all the lamps gone off them all
can they be got as a pattern/spurious part or does any 1 know of any one breaking them
its the drivers side rear lamp i need
any help would be great
thanks

Johro · 22-01-2011 12:25AM

DirtyDiesels wrote: »

Does anyone know where i can get a roll of carpet to reline the inside of my jeep. the old carpet is tatty and smelly and just want to redo it...any ideas...

If ya go to one of the bigger shops like carpet right or places like that they'll have plenty of remnants that would be plenty big enough to do what you want for not too much money. Tell them what you want it for and they should knock off another few quid.
They always have ends of rolls or carpet leftover from fitting jobs.

DirtyDiesels · 22-01-2011 03:31AM

Johro wrote: »

If ya go to one of the bigger shops like carpet right or places like that they'll have plenty of remnants that would be plenty big enough to do what you want for not too much money. Tell them what you want it for and they should knock off another few quid.
They always have ends of rolls or carpet leftover from fitting jobs.

ill try that. thanks

acmatman · 22-01-2011 09:32PM

Looking to buy an ex Irish Army Nissan patrol ? Any body know of one for sale or lying up somewhere ?

valz08 · 26-01-2011 01:13AM

Hi i am looking for a drivers mirror for a volkswagen Touareg 2006. it is due to be tested and am finding it hard to find one. I went to my local VW dealer and they want 200+ euro as it has indicators in it. Any advice on where i could even get a second hand one, anywhere I tried don't seem to have any.I have tried Traynors up the north, they had one but had it just sold before i ordered it. I have all the wiring etc. I just need the actual mirror and unit.
would appreciate any advice on where to get one.

pete_mcs · 26-01-2011 02:31PM

Hi All,
I am looking for a door handle to fit the fibre glass cover on my Ford Ranger. snapped off the manufactures one while pulling the cover off. Any door handle that is lockable would be great, dont really care about size or colour.
Thanks All

jennym2 · 26-01-2011 03:23PM

Have a friend who's bought from these guys, very reliable, and good value. http://www.devon4x4.com/

The **WANTED** Thread

Comments

The WANTED Thread