The **WANTED** Thread

Slidey

This thread will be for all the wanted requests.

Please put any relevant 4x4 wants in here.

The idea of this is to tidy up the front page and cut down on clutter.

EDIT:If you can help anyone out please reply OFF thread. Thanks

macadam

I am looking for a mf 35/35x or a 135 or even a ford 2000, engine and hydraulics must be in good condition .

Pm me if you are selling or know where one is for sale.

seoirse1980

Lookin to get a spare wheel cover and an A bar for a silver 04 landcruiser,
Does anyone know where might be the best place to pick them up cheapish? Breakers yard or the like.

In dublin, Wicklow area

Cheers,

Seoirse

Turbury

Lads the radio in my Ex100 digger has stopped working. The origonal is made by Fujitsu Ten and as you can see in the photo it is not as deep as an ordinary car/tractor radio. Any ideas where I might get a replacement?

Ps - an ordinary size car/tractor radio wont work - there isn't enough clearance behind - pilot pipes from levers in the way.

raher1

i am looking for a yamaha big bear 4x4 engine block and gears but more a an engine block

Farls

seoirse1980 wrote: »

Lookin to get a spare wheel cover and an A bar for a silver 04 landcruiser,
Does anyone know where might be the best place to pick them up cheapish? Breakers yard or the like.

In dublin, Wicklow area

Cheers,

Seoirse

Traynors will have them, their based in Armagh but deliver via courier at very keen rates.

http://www.traynors.biz/

Slidey

Turbury wrote: »

Lads the radio in my Ex100 digger has stopped working. The origonal is made by Fujitsu Ten and as you can see in the photo it is not as deep as an ordinary car/tractor radio. Any ideas where I might get a replacement?

Ps - an ordinary size car/tractor radio wont work - there isn't enough clearance behind - pilot pipes from levers in the way.

If you are anywhere near Roscommon McSharrys there have a lot of Hitachi machines broken. I'd be fairly confident they would have one.

dave.mc.

Does anyone know of a cheap transport box for sale.Thanks

Slidey

Location, size and condition?

ji

Looking for a cheap hilux/defender for off road condition not important w.h.y????????????? must be cheap..

superfear

Hi all, im looking for a tow bar for my jeep, its a 04 Mitsubishi Pajero

Farls

superfear wrote: »

Hi all, im looking for a tow bar for my jeep, its a 04 Mitsubishi Pajero

Try scrap yards like trainors as mentioned in a post above or buy new from witter. If you bring your Paj to a Mitsubishi garage its a witter towbar they will fit.

http://www.witter-towbars.co.uk

Farls

Wanted, a 1 or 2 ton dumper must be in good condition and 4 wheel drive with an electric start. And reasonably priced too

ji

Farls wrote: »

Wanted, a 1 or 2 ton dumper must be in good condition and 4 wheel drive with an electric start. And reasonably priced too

I might no of a 2.5ton twaithes 4x4 if it would be of use to you let me no and i'll get a contact no.

cormywormy

Hi, anybody know where i might get a jcb narrow vee shaped bucket or a 12" bucket or 9"bucket.Would be looking for a used one.
Thanks

oflynno

wanted for a 580g

grading bucket,12" bucket and maybe a 2 foot

what you got?

hollyfox

do anyone Know where i could get a International 440 nbaler for scrap
I LENT mine to my first cousin 2 years ago and he broke a swirly bit in the Knotters, i priced the part it in the region of 650 euro new. the cousin dosent call often now when he found out the price of it. i need to get baler up and running again. help much appreciated.:mad::rolleyes:

FairyCake87

hi does anyone no where i could pick up a small square wrapper anywhere??????

adne

Im looking for a 91-97 Fiat 90 90 4 wd.... would also consider a 100-90 and a 110-90

FairyCake87

hi i no wheres there a fiat 110-90 i can price for ya

bushy...

Turbury wrote: »

Lads the radio in my Ex100 digger has stopped working. The origonal is made by Fujitsu Ten and as you can see in the photo it is not as deep as an ordinary car/tractor radio. Any ideas where I might get a replacement?

Ps - an ordinary size car/tractor radio wont work - there isn't enough clearance behind - pilot pipes from levers in the way.

(Some?) older Toyota Hiluxs had a radio like that , removed a non-working one lately - stuck in my mind because it looked a bit unusual

oflynno

also wanted a landcruiser bj40 in any condition except perfect

Rujib1

Wanted JCB 3CX. Needs to be good tight condition. 4WD preferred, but might consider 2WD. PM if you know of anything!

Farls

Wanted, good clean plant trailer, has to be 3.5 ton suitable for ball hitch. Ideally a 10*6 double axle or 12*6 double or tri axle ifor williams but will look at others.

DarrenGT4

im looking to buy a lorry in the next two weeks. im looking for the older scania model. its a 143 450hp. very hard to get a clean one nowadays so if you no of anyone with a good one pm me thanks

ormondprop

well lads i'm lookin for a mini digger, preferably zero swing, we already have a hitachi zx50u which is a great digger already but looking for something smaller aswell like a komatsu pc27 that we traded in for the hitachi, or a 3-4 ton hitachi, komatsu or teakuchi, we're stuck 4 a 2nd one and need it within 2 weeks, recession me hole:D, just wonderin do ye know where i can find a good clean 2nd hand 1 or some good dealers ye know off close to tipperary or munster,

MOD EDIT Moved to the wanted thread.

raher1

donedeal.ie have a few for sale of different states

hollyfox wrote: »

do anyone Know where i could get a International 440 nbaler for scrap
I LENT mine to my first cousin 2 years ago and he broke a swirly bit in the Knotters, i priced the part it in the region of 650 euro new. the cousin dosent call often now when he found out the price of it. i need to get baler up and running again. help much appreciated.:mad::rolleyes:

mossy2

Hello there

Does anyone know where I might get a part for the Hurth gearbox of a 1987 Benford Dumper with a Deutz Hurth. I understand that the synchro hub of the forward / reverse gearbox needs replacing.

If the part isnt available I'd be interested in a scrapped gearbox or actual dumper.
Thanks

oflynno

mossy2 wrote: »

Hello there

Does anyone know where I might get a part for the Hurth gearbox of a 1987 Benford Dumper with a Deutz Hurth. I understand that the synchro hub of the forward / reverse gearbox needs replacing.

If the part isnt available I'd be interested in a scrapped gearbox or actual dumper.
Thanks

try kmurphy dumpers,i think its in kilkenny0868240306

Loobz

Hi,

Im in the middle of a job and I need a price for a Rubber Track for Peljob EB30.4 Mini Digger (mine just broke). Or does anybody know online where I can order one?

Please PM me if you have any info, need one in a hurry. Cheapest price.

oflynno

A1 plantspares in the north are the cheapest and will deliver

www.4ni.co.uk/40250x158x11_a-i-plantspares-newtownabbey-antrim.htm

if you are in cork and can collect,eamon long

www.eamonlong.com/

Rujib1

Wanted, Backhoe Digger / Loader.

Thinking late eighties JCB3CX 4WD 4 in 1 front bucket, or similar.
Must be tidy.

R1

colm_mcm

Canopy for a Mazda B2500/Ford Ranger double cab. (pref navy and v.cheap!)

oflynno

oflynno wrote: »

wanted for a 580g

grading bucket,12" bucket and maybe a 2 foot

what you got?

still looking for a grading bucket and a 3 foot,a 9" or 12" too.

anyone,anyone?

jamie2000

hi iam looking for four wheel drive tractor any make concidered around 100hp and around mid eightys price

roryq69

Currently restoring an old t20 diesel and looking for a few bits and pieces! Hoping someone here might be breaking one or know where i should look for parts! Need an instrument panel and the airbox and hoses and pre-cleaner! Based in donegal so the closer i can get parts the better. thanks for any help.

RORY.

oflynno

try this fella,its close to your parish then it is to mine

http://www.donedeal.ie/for-sale/trucks/935783

DanFindy

Tractor wanted must be on the button with cab fit t lift round bales and in reasonable nick, up to 2500 offered, anything considered, as close to Donegal as possible, cheers:D

Id ideally like a Zetor 6011 6211 7011 7211 or DB 1290 1390 will pay bit more for the right tractor

MyStubbleItches

I need a check-valve block for the main boom ram on a '98 1637 if anyone is breaking the same or similar.

whalemeat

looking too buy MF 165/188 square axel in good con .


cheers

DanFindy

DanFindy wrote: »

Tractor wanted must be on the button with cab fit t lift round bales and in reasonable nick, up to 2500 offered, anything considered, as close to Donegal as possible, cheers:D

Id ideally like a Zetor 6011 6211 7011 7211 or DB 1290 1390 will pay bit more for the right tractor

bump...........id consider a tidy zetor crystal too

gavinO668

hi im lookin for set of spot lights for th efront of my pajero. its a jap import and has the yellow spots. so im lokkin fo replace them. all sets ive looked at are between 200 & 250...

Any cheaper one's about the place?!

ormondprop

lookin for a hilux around the 03 mark or a golf van, preferably 05 upwards model and around munster area

oflynno

now looking for a jcb 3cx 4wd

1985 to 1993 model type with 4in1 bucket

thanks

the drifter

Looking for Defender 90 closed back..not pickup...budget 10-12k anyone point me in the right direction?

Fizman

Hi lads,

Not sure if this is the correct place to post but my dad needs a forklift for his warehouse. Nothing over the top or shiny and new, he's just looking to get something functional to replace the old one.

He said to have a look up on eBay which I will, but thought I'd post here to see if anyone had any recommendations or contacts. Any links to reputable sellers etc?

His place is in Limerick city.

Any info appreciated.

oflynno

ford 5000 engine wanted

looking for an engine for a ford 5000

the one it came with is out of a 6610 apparantly

i'm in cork

aoife2k

WANTED

White spare wheel cover to suit Isuzu Trooper... Preferably with 'Isuzu Trooper' written on it. If you have one or know where I can get one, please P.M me.

Thank-you

slaxbolts

Alright lads, looking for a load of stuff!

izuzu trooper 4/2wd any condition no tax/log book needed just for off roading. round 500 quid

tractor wanted 4wd only any make/condition under 800

hymac 580c wanted any condition but has to be running under 1000

hay shed wanted ( shouldn't really be n this section) 3 bay with lean two(s) preferably has to be round 500 in good nik.

dexta clutch

david broown 1210 4wd water pump, front axle




i could swap you something for some of that stuff.

have here jcb 3c 2wd for scrap sitting outside 15 years good for bits.

oflynno

slaxbolts wrote: »

Alright lads, looking for a load of stuff!

izuzu trooper 4/2wd any condition no tax/log book needed just for off roading. round 500 quid

tractor wanted 4wd only any make/condition under 800

hymac 580c wanted any condition but has to be running under 1000

hay shed wanted ( shouldn't really be n this section) 3 bay with lean two(s) preferably has to be round 500 in good nik.

dexta clutch

david broown 1210 4wd water pump, front axle




i could swap you something for some of that stuff.

have here jcb 3c 2wd for scrap sitting outside 15 years good for bits.

where in the country are you
i will check on a trooper for you

slaxbolts

well im in dublin but the trooper will be in the country (mayo)! what year, colour, long or short model, any pics, commercial or seated and whats he looking?

thanks