Zgemma H7s Guide

greasepalm

SSD and HHDS need to be seen is why i asked if you removed and inserted it while powered off.

Did you setup your recording device as ext4 to be seen by the box .

I also use Vix and simple 1080.

I have lost recordings many times and if a reboot does not fix it a powering off at rear does and storage device is then seen in menu.

swoofer

would need the version in use, can you do menu information about. Also do you know how to flash an image to another slot? you could try openatv. The ssd could be gone, have you a spare to try?

egal

https://www.boards.ie/discussion/comment/123527259#Comment_123527259

How do I set up recording device as ext4? I haven't come across anything resembling ext4.

swoofer

egal I can only help when I have sufficient information. You cant do anything with ext4 when SSD is not recognised and it may be a software problem. The latest version of vix is 6.7.011, I'm on 6.6.012.

egal

Sorry, swoofer, I don't understand. And, anyway, my box is not connected to the Internet. We'll have to leave it there, then. Thanks again for taking an interest.

greasepalm

Would be handier if you had an internet connection

egal

https://www.boards.ie/discussion/comment/123529672#Comment_123529672

If I had an internet connection would that help solve my problem? Bear in mind that I'm a novice when it comes to these things.

greasepalm

https://www.boards.ie/discussion/comment/123531513#Comment_123531513

Yes it makes life handier as to download images straight to box and flash new images to box from remote.

That box has 4 slots and would flash a new image to a different slot and maybe then your storage device is seen and works again.