WETEK Play/OPENELEC user discussion, tips n' tricks

The_Shotz

Allyall wrote: »

In Kodi, openelec, or in general?

Try MX Player from the play store for Android, a new rom or reinstall openelec.

Ye I am using openelec, flashed android initially but I was only using kodi so I switched back to openelec

drunkmonkey

Anyway to get Netflix on openelec, all I've done is install ares wizard and the beast build, want to be be able to get all the cloud channels and Netflix app, have a sky sub at the moment so not worried about tuning in channels through the dish?

randombar

Got the picons working with tvheadend.

Settings:

https://www.dropbox.com/s/hxw12l6foni2p43/Screenshot%202016-04-04%2022.29.49.png?dl=0

Downloaded from here:

https://picons.xyz/

EPG is a bit slow and buggy all right, wondering is there a better source.

bromley52

tommycahir wrote: »

I'm currently putting together a guide on setting up pbnigma on a msd card on the following forum, if that is the route you are taking any feedback on the guide would be appreciated as it is currently a work in progress.

http://forum.kodicommunity.com/viewtopic.php?f=53&t=499

Thanks for your guide as without it I would have been lost. I managed to add picons using the following.

I took the picons from here
and loaded them into root\usr\share\enigma2\picon. They have a nice blue background.
I used 7-zip to extract them.

Change the picon path to usr\share\enigma2
Go to menu/setup/system/picon path

They are not perfect but good enough for me. I installed Rats updater plugin but I am not sure if it works.


Edit: I only just saw GaryCocs post. His source might even be better and possibly allow for a plugin along the lines of Rats. Some genius with time could possibly edit it for such. I used 7-zip to have a look and I can't see why it wouldn't be possible.

tommycahir

bromley52 wrote: »

Thanks for your guide as without it I would have been lost. I managed to add picons using the following.

I took the picons from here
and loaded them into root\usr\share\enigma2\picon. They have a nice blue background.
I used 7-zip to extract them.

Change the picon path to usr\share\enigma2
Go to menu/setup/system/picon path

They are not perfect but good enough for me. I installed Rats updater plugin but I am not sure if it works.


Edit: I only just saw GaryCocs post. His source might even be better and possibly allow for a plugin along the lines of Rats. Some genius with time could possibly edit it for such. I used 7-zip to have a look and I can't see why it wouldn't be possible.

Thanks mate will look into that picon topic now, which skin were you using to get the picons showing?

bromley52

tommycahir wrote: »

Thanks mate will look into that picon topic now, which skin were you using to get the picons showing?

Sorry I can't remember. I'm sure I just followed your guide.

randombar

Anyone have any better source for EPG for TVheadend?

bromley52

tommycahir wrote: »

Thanks mate will look into that picon topic now, which skin were you using to get the picons showing?

I am using the slyk-1-hd skin.

Euphoriasean

Anyone using openelec and finding the wetek constantly freezes. No way to reboot apart from pulling the plug.

Allyall

Euphoriasean wrote: »

Anyone using openelec and finding the wetek constantly freezes. No way to reboot apart from pulling the plug.

That could be a number of different things. It may be one of your addons. Try removing a few that you don't need and then remove one at a time until you get the culprit.
Unless you've got a ton of stuff installed. In that case I'd wipe it and install what I needed one by one.

Euphoriasean

Allyall wrote: »

That could be a number of different things. It may be one of your addons. Try removing a few that you don't need and then remove one at a time until you get the culprit.
Unless you've got a ton of stuff installed. In that case I'd wipe it and install what I needed one by one.

Ill give that a go and wipe if necessary. Thanks.

batistuta9

GaryCocs wrote: »

Anyone have any better source for EPG for TVheadend?

what do you use, opentv:sky uk?

Euphoriasean wrote: »

Anyone using openelec and finding the wetek constantly freezes. No way to reboot apart from pulling the plug.

yep, happens a good bit with me. are you using it for tv, with tvheadend etc. setup?
i don't think it's any addons causing it, i think it's either tv or external hdd related

i must look at the crash logs sometime

niallb

I'm on OpenELEC and I haven't had major freezing problems.
Running tvheadend as a PVR backend.

jakdublin

niallb wrote: »

I'm on OpenELEC and I haven't had major freezing problems.
Running tvheadend as a PVR backend.

Same here. I'm wondering why people don't stick with Openelec. Can't see any major advantage to flashing images and it looks like most problems posted here are related to that.
Had a few freezing problems initially but started again from scratch and built my set up slowly over time, just adding stuff I actually use. Reckon those early problems were conflicting Kodi add ons.

RossieMan

If you've used pbnigma, or any enigma2 image, it's just much better and easier to use.

niallb

RossieMan wrote: »

If you've used pbnigma, or any enigma2 image, it's just much better and easier to use.

That's a matter of opinion only. Freezing is something you can measure.

There are plenty alternative skins for KODI which give you a sky style EPG if that's what you're looking for - Eminence works well here.

theduffer

Hi Folks,

Can someone recommend a USB DVB-T tuener that works out of the box with pbnigma..

I understand some of them need you to install driver support, not to hot on linux so if someone could confirm one that works easy that would be great!

Also a link to how i enable the adapter or does this simply work and integrate with epg etc..

Thanks for any help

Theduffer

jakdublin

RossieMan wrote: »

If you've used pbnigma, or any enigma2 image, it's just much better and easier to use.

I've heard that said a few times, but in what way is it better? I'm just curious to know if it would be worth the trouble considering the amount of hassle some people seem to be having with it.

AnCatDubh

Anyone using the all4 app on wetek/android?

I had this configuration working fine. As you loaded the app it would moan about the box being rooted and not being supported but that was only a pop up and the content played fine. When you allowed it to go further, it played the content.

But the app updated in recent times (last week - 10days i guess), and [only] since the update it refuses to stream anytthing saying you can't download (this, not using the download button - i'm just trying to stream).

Anyhow, has anyone any success with it currently or has it just 'advanced' to a point where it won't work with the WeTek as it is a rooted box??

Thanks.

RossieMan

It gives you a channel list, very similar to sky once you set it up that way.

The channels do not take 2-3 seconds to change.

It has a fully loaded EPG. Once set up.

It has kodi on the side. You have to enter and exit it.

Its absolutely perfect.

Allyall

AnCatDubh wrote: »

Anyone using the all4 app on wetek/android?

Anyhow, has anyone any success with it currently or has it just 'advanced' to a point where it won't work with the WeTek as it is a rooted box??

Thanks.

I've not used this but I think it's also in Kodi and there are some apps available to trick other apps into thinking that a device isn't rooted.

For example - Hide My Root

I don't know if that one in particular will work, I've not tried it.

jakdublin

RossieMan wrote: »

It gives you a channel list, very similar to sky once you set it up that way.

The channels do not take 2-3 seconds to change.

It has a fully loaded EPG. Once set up.

It has kodi on the side. You have to enter and exit it.

Its absolutely perfect.

I have all that with the Openelec, although I did notice the channels taking a couple of seconds to change but that doesn't bother me. Looking on YouTube, using enigma2 images looks way nicer but to be honest, it took me so long to get the set up I have working the way I want it that I'd be afraid to start messing around with flashing images as I know little about it. FOMO might get the better of me one of these days though

branners69

RossieMan wrote: »

It gives you a channel list, very similar to sky once you set it up that way.

The channels do not take 2-3 seconds to change.

It has a fully loaded EPG. Once set up.

It has kodi on the side. You have to enter and exit it.

Its absolutely perfect.

I have to agree with this, especially the delay in changing the channels. That 2-3 seconds delay cracked me up!

When using Pbnigma I get the odd freeze when I am exiting out of Kodi but nothing too major! I can most times reboot the Wetek using a tablet or phone!

Euphoriasean

jakdublin wrote: »

Same here. I'm wondering why people don't stick with Openelec. Can't see any major advantage to flashing images and it looks like most problems posted here are related to that.
Had a few freezing problems initially but started again from scratch and built my set up slowly over time, just adding stuff I actually use. Reckon those early problems were conflicting Kodi add ons.

So are you still having the freezing issues? I'm still having them. I've only tvheadend,Oscam and exodus installed along with the stock kodi addons.

Also if I plug it in over night when I return the box is still on but the tv is showing no device input.

Have ordered the enigma remote so I will give e2 a whirl. What image are people using?

GY A1

look back a couple pages,
there was one linked by allyall for about 6 euro,
its been posted loads now

theduffer wrote: »

Hi Folks,

Can someone recommend a USB DVB-T tuener that works out of the box with pbnigma..

I understand some of them need you to install driver support, not to hot on linux so if someone could confirm one that works easy that would be great!

Also a link to how i enable the adapter or does this simply work and integrate with epg etc..

Thanks for any help

Theduffer

AnCatDubh

Allyall wrote: »

I've not used this but I think it's also in Kodi and there are some apps available to trick other apps into thinking that a device isn't rooted.

For example - Hide My Root

I don't know if that one in particular will work, I've not tried it.

Worked a treat. Thanks a mil.

jakdublin

Euphoriasean wrote: »

So are you still having the freezing issues? I'm still having them. I've only tvheadend,Oscam and exodus installed along with the stock kodi addons.

Also if I plug it in over night when I return the box is still on but the tv is showing no device input.

Have ordered the enigma remote so I will give e2 a whirl. What image are people using?

No freezing now. I don't use Oscam. Maybe it's related to that. Be interested to hear how you get on with a new set up.

The_Shotz

The_Shotz wrote: »

Hi lads are they any settings on the box to improve streams.

A lot of stuff plays perfectly but a few hd streams play in slow motion and as a result the sound is out of sync,

The same streams which stream in slow motion stream perfectly on my tablet, possibly could be the box not able to handle the stream?

Just an update for anyone who may have experienced similar problem

Checked settings and changed the display from 720p to 1080p and turned back on the acceleration setting and streams in hd are working perfectly.

tommycahir

I remember seeing it in some thread before but the picture on TV3 seems to be in the wrong aspect ratio, does anybody know how to change it to "stretch" to fill the entire screen?

wiz569

tommycahir wrote: »

I remember seeing it in some thread before but the picture on TV3 seems to be in the wrong aspect ratio, does anybody know how to change it to "stretch" to fill the entire screen?

Although it will affect all 4:3 ratio broadcasts you can change it in audio/video settings