Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Pimp My Knife

2456720

Comments

  • Registered Users, Registered Users 2 Posts: 77 ✭✭baldyshane


    If there is still a place left please COUNT ME IN. Followed your last project here and it was class. Let me know how you want the €50 if I make a place. Cheers.


  • Registered Users, Registered Users 2 Posts: 563 ✭✭✭davymoore


    1. moby30
    2. customrifle
    3. skippey
    4. EPointer=Birdss
    5. Mauser 308
    6. dwighet
    7. belowaverageiq
    8. Bibio
    9. riflehunter77
    10. Dupont
    11. .220 Swift
    12. underthethumb
    13. 650gs
    14. garveyjg
    15. baldyshane
    Entries Closed

    That's it guys entries are closed we have 15 and that's all I can manage.
    With regards to deposits etc. I'll contact everyone via PM to see what suits each of you. Paypal works best for me but we'll work something out for everyone.

    I had planned to leave the entries open till the 5th of September but it has filled up mighty quick. It will be a week or two before I start contacting people re the deposits etc. so don't worry if you haven't heard from me. Your spot is safe.

    Thanks again I'm flattered with the response

    Regards

    Davy

    BTW Hibrion your project is still number one priority :)


  • Registered Users, Registered Users 2 Posts: 2,399 ✭✭✭dwighet


    Your going to be a busy boy Davy....
    Stock up on the coffee...A few late nights ahead of you.:cool:


  • Registered Users, Registered Users 2 Posts: 1,102 ✭✭✭Hibrion


    Looking forward to seeing how this one turns out, guys. Best of luck with it, Davy.


  • Registered Users, Registered Users 2 Posts: 2,070 ✭✭✭EPointer=Birdss


    Would love to see the Bowie when it's done


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,102 ✭✭✭Hibrion


    I will of course post a picture when it's done. I had intended putting a few up with my new Winchester 30-30 in the thread I started a good while ago.


  • Registered Users, Registered Users 2 Posts: 682 ✭✭✭demonloop


    COUNT ME IN

    Crap, just noticed it's full. If anyone drops out count me in for 100% certain! Paypal at the ready

    I'm frigging ripping I missed this, RIPPING !!!

    Come on lads, someone needs one of these less than me surely!!!


  • Registered Users, Registered Users 2 Posts: 563 ✭✭✭davymoore


    Hi demonloop

    Sorry you missed out, If anyone falls out You may have the first reserve spot

    Davy


  • Registered Users, Registered Users 2 Posts: 11,392 ✭✭✭✭Vegeta


    Can I be second reserve please. :D

    Love these kind of projects


  • Registered Users, Registered Users 2 Posts: 563 ✭✭✭davymoore


    You Got Second Reserve Spot


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 682 ✭✭✭demonloop


    Come on lads, some of you must have kids that need new shoes or something :D

    Better to drop out now whilst you have time :P


  • Registered Users, Registered Users 2 Posts: 1,078 ✭✭✭gunhappy_ie


    Beautiful knife :).... and I just realised that I missed out ... crap !

    Good luck to all involved !

    GH


  • Registered Users, Registered Users 2 Posts: 584 ✭✭✭Mauser 308


    Guys everyone who missed out will still be able to buy the knife or have Davy design another one, just not at this very discounted price.
    Have a look at his web site for ideas.


  • Registered Users, Registered Users 2 Posts: 563 ✭✭✭davymoore


    Lads I'm posting this just to give you an idea of how I will keep tabs over who wants what options in the competition.

    You will be able to see what everybody wants using the table below.
    As options are added columns will be added to the right.

    #|USER NAME|DEPOSIT|L/R Hand|Option |Option
    1|moby30|No|||
    2|customrifle|No|||
    3|skippey|No|||
    4|EPointer=Birdss|No|||
    5|Mauser 308|No|||
    6|dwighet|No|||
    7|belowaverageiq|No|||
    8|Bibio|No|||
    9|riflehunter77|No|||
    10|Dupont|No|||
    11|.220 Swift|No|||
    12|underthethumb|No|||
    13|650gs|No|||
    14|garveyjg|No|||
    15|baldyshane|No|||
    |RESERVES||||
    *|demonloop||||
    *|Vegeta||||


    First option ......... Are you Left or Right Handed?
    Decide whether you would like a Left Handed or Right Handed Knife.
    Picking either one triggers two steps in the build of your knife. The first one is probably obvious in the fact that it decides whether you get a Left or Right handed Sheath. But the second step is one you may not be aware of if you have never had a custom knife built. This step dictates is where I put my makers mark on your blade. Imagine you are holding the knife, by it's handle, in a normal cutting position, in your chosen hand. Then if you turn the knife to look at the blade you should be able to see my makers mark. For left handed people the mark must go on the right hand side of the blade and vise versa.

    So do you want a left handed or right handed knife?


    For this and all options Please don't attempt to insert into the table yourself(it's a tricky job).
    Please don't PM me with options but feel free to PM me if you have any questions or need to discuss something privately.
    All options must be kept public. So choose now and post it here in the forum.
    I will then post your choice into the table.


    Remember ...Once you post, you cannot reverse your decision


    BTW: Nobody has been asked to pay a deposit yet


  • Registered Users, Registered Users 2 Posts: 2,070 ✭✭✭EPointer=Birdss


    Right hand Davy thanks.
    Now it's starting to get interesting :D


  • Closed Accounts Posts: 506 ✭✭✭moby30


    I will go with a right handed knife please Davy.
    Thanks


  • Registered Users, Registered Users 2 Posts: 2,399 ✭✭✭dwighet


    Right hand mate


  • Registered Users, Registered Users 2 Posts: 59 ✭✭skippey


    Right hand cheers


  • Registered Users, Registered Users 2 Posts: 563 ✭✭✭davymoore


    #|USER NAME|DEPOSIT|L/R Hand|Option|Option
    1|moby30|No|Right||
    2|customrifle|No|Right||
    3|skippey|No|Right||
    4|EPointer=Birdss|No|Right||
    5|Mauser 308|No|Right||
    6|dwighet|No|Right||
    7|belowaverageiq|No|Left||
    8|Bibio|No|||
    9|riflehunter77|No|Right||
    10|Dupont|No|Right||
    11|.220 Swift|No|Right||
    12|underthethumb|No|Right||
    13|650gs|No|Right||
    14|garveyjg|No|Right||
    15|baldyshane|No|Right||
    |RESERVES||||
    *|demonloop||||
    *|Vegeta||||

    First option ......... Are you Left or Right Handed?
    Decide whether you would like a Left Handed or Right Handed Knife.
    Picking either one triggers two steps in the build of your knife. The first one is probably obvious in the fact that it decides whether you get a Left or Right handed Sheath. But the second step is one you may not be aware of if you have never had a custom knife built. This step dictates where I put my makers mark on your blade. Imagine you are holding the knife, by it's handle, in a normal cutting position, in your chosen hand. Then if you turn the knife to look at the blade you should be able to see my makers mark. For left handed people the mark must go on the right hand side of the blade and vise versa.

    So do you want a left handed or right handed knife?.


    For this and all options Please don't attempt to insert into the table yourself(it's a tricky job).
    Please don't PM me with options but feel free to PM me if you have any questions or need to discuss something privately.
    All options must be kept public. So choose now and post it here in the forum.
    I will then post your choice into the table.


    Once you post you cannot reverse your decision.

    BTW: Nobody has been asked to pay a deposit yet


  • Registered Users, Registered Users 2 Posts: 419 ✭✭customrifle


    Right handed please Davy.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 951 ✭✭✭Dupont


    right handed for me


  • Registered Users, Registered Users 2 Posts: 789 ✭✭✭650gs


    Right hand for me Davy


  • Registered Users, Registered Users 2 Posts: 24 garveyjg


    right handed please:)


  • Registered Users, Registered Users 2 Posts: 782 ✭✭✭riflehunter77


    Right handed Davy let us know when you need that deposit.


  • Registered Users, Registered Users 2 Posts: 77 ✭✭baldyshane


    Right handed please Dave. Just say the word and I'll sort out your deposit.
    BTW if I am lucky enough to win I do NOT need you to call it baldyshane.


  • Registered Users, Registered Users 2 Posts: 216 ✭✭underthetumb


    right handed too please davy, cant believe we have no lefties


  • Registered Users, Registered Users 2 Posts: 35 .220 swift


    right hand please davy


  • Registered Users, Registered Users 2 Posts: 584 ✭✭✭Mauser 308


    I am Right Handed Davy but perfer to carry a knife on my left side, I assume that wont matter.. Cheers.


  • Registered Users, Registered Users 2 Posts: 563 ✭✭✭davymoore


    Mauser 308 wrote: »
    I am Right Handed Davy but perfer to carry a knife on my left side, I assume that wont matter.. Cheers.

    That's up to you.... would you prefer a left handed sheath for your right handed knife?
    This is custom building afterall


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 584 ✭✭✭Mauser 308


    Yep, sounds ideal Davy...As a matter of interest do many right handed people carry their knives on the left?


Advertisement