Change Eircom Phonewatch Alarm Code

blahblah06 · 06-07-2010 6:55pm #1

Hi guys ive tried looking through past threads but wonder does anyone have a step by step guide on how to change the alarm code on a eircom alarm?

altor · 06-07-2010 8:54pm

blahblah06 wrote: »

Hi guys ive tried looking through past threads but wonder does anyone have a step by step guide on how to change the alarm code on a eircom alarm?

Hi blahblah06,

What type panel do you have installed ?

blahblah06 · 07-07-2010 2:52am

Hey man it's a hkc alarm?

altor · 07-07-2010 9:02am

blahblah06 wrote: »

Hey man it's a hkc alarm?

If your user management is set up you should be able or else by going into engineering, then the user menu. Have you got the engineer code ?

blahblah06 · 07-07-2010 9:21am

Oh god no idea. I presume it's just 0000

altor · 07-07-2010 9:22am

I have sent you a pm with some info..

blahblah06 · 08-07-2010 2:50pm

Guys anyone looking for info contact altor. great man cheers for your help

altor · 08-07-2010 7:13pm

blahblah06 wrote: »

Guys anyone looking for info contact altor. great man cheers for your help

Always happy to help

bananaman8 · 20-02-2012 12:57pm

Hi Altor,

Im trying to do the same thing, access the programming menu on the HKC Eircom Alarm console. Would you mind sending me the info you had on how to go about it? I'd like to change the activation code for the alarm system.

Thanks

altor · 20-02-2012 7:58pm

bananaman8 wrote: »

Hi Altor,

Im trying to do the same thing, access the programming menu on the HKC Eircom Alarm console. Would you mind sending me the info you had on how to go about it? I'd like to change the activation code for the alarm system.

Thanks

More than happy too, sent you a P.M

Ianbritchfield · 03-02-2013 1:52pm

Hi Altor,

Sorry to bother you but I would be grateful if you could also me PM re the alarm code issue.

Thanks,

Ian

altor · 04-02-2013 10:51pm

Ianbritchfield wrote: »

Hi Altor,

Sorry to bother you but I would be grateful if you could also me PM re the alarm code issue.

Thanks,

Ian

No bother at all, P.M. sent.

PaddyCar · 06-02-2013 2:36pm

Hey Altor,
I would be greatful if you could sort me out with the alarm code issue posted previously.
Thanks

altor · 06-02-2013 2:45pm

PaddyCar wrote: »

Hey Altor,
I would be greatful if you could sort me out with the alarm code issue posted previously.
Thanks

More than happy too, sent you a P.M.

tommy_boy · 07-02-2013 1:37pm

Hi Altor,
I'd really appreciate this PM as well if you don't mind. I have a GE Simon panel.

Thanks
Tom

altor · 07-02-2013 8:39pm

tommy_boy wrote: »

Hi Altor,
I'd really appreciate this PM as well if you don't mind. I have a GE Simon panel.

Thanks
Tom

No problem, sent you a P.M.

Muller_1 · 25-02-2013 6:35pm

altor wrote: »

No problem, sent you a P.M.

Any chance you could PM me too, cheers,

altor · 03-03-2013 9:01pm

Muller_1 wrote: »

Any chance you could PM me too, cheers,

No Problem, sent you a P.M.

ocelot741 · 20-03-2013 4:49pm

hi altor, would you have the procure for the interactive technologies eircom alarm (ITI)?

Thanks.

altor · 20-03-2013 10:47pm

ocelot741 wrote: »

hi altor, would you have the procure for the interactive technologies eircom alarm (ITI)?

Thanks.

What are you looking for?

ocelot741 · 21-03-2013 8:16am

I want to change the activation number that yo use when you leave or return to the house.

bluman · 21-03-2013 6:45pm

Hi there
Could you send me a pm of how to change the code please? Thanks

altor · 22-03-2013 11:44am

ocelot741 wrote: »

I want to change the activation number that yo use when you leave or return to the house.

Press the menu button and enter your user code. In this menu you can change the code.

altor · 22-03-2013 11:45am

bluman wrote: »

Hi there
Could you send me a pm of how to change the code please? Thanks

Sent you a P.M.

reni10 · 01-07-2013 3:18pm

I have A Simon phonewatch system so how do I change the code to arm and disarm the unit?

altor · 01-07-2013 3:22pm

reni10 wrote: »

I have A Simon phonewatch system so how do I change the code to arm and disarm the unit?

Drop the front lid and enter your user code.
Press ADD-ACCESS CODE-DONE. Enter new code-Press DONE.
It is the master code you will be changing.
Close up the lid and its done

Jimski · 12-07-2013 11:07am

Hi alto, I am looking for instructions on how to change my eircom alarm code

Thanks

Evolution1 · 12-07-2013 12:46pm

Jimski wrote: »

Hi alto, I am looking for instructions on how to change my eircom alarm code

Thanks

What system have you got ?

Jimski · 12-07-2013 12:53pm

Evolution1 wrote: »

What system have you got ?

HKC

Evolution1 · 12-07-2013 1:06pm

Jimski wrote: »

HKC

Have you the engineer code ?
If you type your user code in does a menu come up ? Arm , disarm

Jimski · 12-07-2013 1:10pm

Evolution1 wrote: »

Have you the engineer code ?
If you type your user code in does a menu come up ? Arm , disarm

No engineer code, once I type my code it automatically goes to arming

Evolution1 · 12-07-2013 1:11pm

Jimski wrote: »

No engineer code, once I type my code it automatically goes to arming

Have you the paper work off the system ? Is it still monitored by phone watch ?

Jimski · 12-07-2013 1:13pm

Evolution1 wrote: »

Have you the paper work off the system ? Is it still monitored by phone watch ?

I do the paperwork but no longer an eircom customer

altor · 12-07-2013 2:11pm

Jimski wrote: »

I do the paperwork but no longer an eircom customer

I sent you a P.M. re the code.

Put in your engineer code.
Service menu comes up.
Scroll using the # key to users, press yes.
User codes, press yes.
User 1, press yes.
Input the new user code, press yes.
Verify Code, press yes.
Press quit until you see exit engineering.

Test code and that is it done.

Jimski · 12-07-2013 2:51pm

altor wrote: »

I sent you a P.M. re the code.

Put in your engineer code.
Service menu comes up.
Scroll using the # key to users, press yes.
User codes, press yes.
User 1, press yes.
Input the new user code, press yes.
Verify Code, press yes.
Press quit until you see exit engineering.

Test code and that is it done.

Thank you so much , it did work

altor · 12-07-2013 3:47pm

Jimski wrote: »

Thank you so much , it did work

Your welcome, any other problems let us know..

pipman · 24-08-2013 3:54pm

Hi Altor,

Can you please send code via pm also. It's a HKC unit no longer monitored by Eircom etc.

altor wrote: »

I sent you a P.M. re the code.

Put in your engineer code.
Service menu comes up.
Scroll using the # key to users, press yes.
User codes, press yes.
User 1, press yes.
Input the new user code, press yes.
Verify Code, press yes.
Press quit until you see exit engineering.

Test code and that is it done.

blahblah06 · 29-08-2013 1:25pm

Altor
Sorry to bother u but time to change the code again and can't remember the engineer code and they want €110 call out few to change the code

altor · 04-09-2013 10:42pm

blahblah06 wrote: »

Altor
Sorry to bother u but time to change the code again and can't remember the engineer code and they want €110 call out few to change the code

Hi blahblah06,

That is no problem, sent you a P.M.

whizbang · 04-09-2013 11:29pm

Hi Altor, can I trouble you for the installer/dealer code for simon XT. I have all the paperwork, with a heap of different numbers, but none of them work.
thanks

altor · 04-09-2013 11:32pm

whizbang wrote: »

Hi Altor, can I trouble you for the installer/dealer code for simon XT. I have all the paperwork, with a heap of different numbers, but none of them work.
thanks

Sent you a P.M.

dobsdave · 16-09-2013 3:11pm

I also have a simon unit, do I have to do a full reset/set-up to add a sensor or other maintenance?
I dont have the engineer code and it is no longer monitored.

Vonwiller · 20-10-2013 9:19pm

Hi I wonder could you help me with the engineering code- recently cancelled contract and Eircom are saying they need to send an engineer to disconnect system at a charge - would be grateful if u could help me out with how to disconnect but still use as normal alarm . Thanks- meant to say. Model is simon xt

KoolKid · 20-10-2013 9:44pm

I sent you a PM re the engineer code & the manual.
Hope it helps.;)

Vonwiller · 21-10-2013 3:02pm

Thanks a million will give it a go

JFKIRELAND · 22-10-2013 5:22pm

Guys,
I wonder if you can help? I have a Phonewatch simon system (now not monitored). I have just had building works done in the house and 2 of the motion sensors were removed during the build. I put them back up earlier on myself. I am getting lots of tamper and system alerts on the system now.
Is there a code to reset the system to clear these alerts?
Any thoughts or help appreciated.
Thanks

altor · 22-10-2013 10:19pm

JFKIRELAND wrote: »

Guys,
I wonder if you can help? I have a Phonewatch simon system (now not monitored). I have just had building works done in the house and 2 of the motion sensors were removed during the build. I put them back up earlier on myself. I am getting lots of tamper and system alerts on the system now.
Is there a code to reset the system to clear these alerts?
Any thoughts or help appreciated.
Thanks

Can you press the status button a few times to listen to all events then press disarm.
Now start again pressing the status button to see what the faults are.
Just post what they are and I will tell you how to sort them

JFKIRELAND · 22-10-2013 10:23pm

Thanks Altor,
I will do it tomorrow evening - Do not want to wake the kids up! (again)
JK

altor · 22-10-2013 10:29pm

JFKIRELAND wrote: »

Thanks Altor,
I will do it tomorrow evening - Do not want to wake the kids up! (again)
JK

No worries, if you want to turn off the trouble beeps tonight. Drop the front lid, put in your user code, press, delete, option, 01, done

JFKIRELAND · 26-10-2013 4:07pm

Hi Altor,
If I try to set the alarm now the messages I get are:
System low battery
System Phone Comm Failure and
System Access alarm..

I was getting statuses of the different sensors earlier in the week - no sign now

Many Thanks
JFK

JFKIRELAND · 29-10-2013 7:46pm

Bump....

Change Eircom Phonewatch Alarm Code

Comments