vu+ duo

givecredit

RogerThis wrote: »

I'm having problem doing a DTT scan. Does anybody know what frequency or other setting to set for Truskmore? I tried doing a complete scan but that didn't work either.

Make sure to switch off and back on duo after install dtt, Also ensure set to europe dtt, not eurupe cable or Australia.

irishchris

yes as givecredit correctly says reboot is essential after installing driver for dvb-t. assumed you had set it up but if not then is like he said you need to go into system/service searching/tuner cofiguration and select tuner c then move region to europe dvb-t and save.

then try rescanning

byte

Oooooooh!

I shall be installing this! Though not until I'm prepared to start from scratch with my settings etc.

I'm wondering, will this work with a WinTV Nova TD? Or maybe TD is the same as T? I think the D is for Dual, as it's dualtuner.

Apogee

Up and running with a Nova-T here - came in use for recording 'An Píopa' doc on TG4. Looks pretty good so far. The change of function of the central button will require a bit of relearning.

Can't get cam up for reading FTV card however. If someone finds an .ipk file for CCcam which works OK, could they post details (or pm)?

TIA

dnme

**taps fingers on table**

tap tap tap
tap tap tap
tap tap tap tap

bastards, the lot a ye:cool:

Gipo3

Some Screenshots








My quick epg is different than Apogee's.

kierank01

It seems to be working really well for me.

My epg looks like Gipo3's, but I haven't activated pip yet.

Does anyone know how to get picons working for the dtt channels?

irishchris

right click and save as the name it comes up with - which will be the correct channel references for the dtt channels. i have the radio ones as well if you want them

irishgeo

kierank01 wrote: »

It seems to be working really well for me.

My epg looks like Gipo3's, but I haven't activated pip yet.

Does anyone know how to get picons working for the dtt channels?

any idea of a nova-t usb stick will work in castlebar

dfdream

Irishgeo,

Go to this web site and check the map.

Not sure how accurate it is but it seems fine for me.

http://www.mpeg4ireland.com/aerial-setup

Gipo3

When i mean quick epg i mean the info bar is different.
DTT is available from Castlebar channel 22.

Gipo3

Here is info for cam, im using 2.2.1

stanley1

can't seem to find multi-epg, used to be on red button. Using vix 2.0

irishchris

stanley1 wrote: »

can't seem to find multi-epg, used to be on red button. Using vix 2.0

keep epg button pressed fpr few seconds and will give you option of vix epg , multiepg or single epg

stanley1

ok, thanks chris, working fine now.

dfdream

Lads,

Is the infinity_HD skin in the downloads for Vix 2.0.

D

stanley1

no, not on plugin downloads.

Apogee

irishchris wrote: »

right click and save as the name it comes up with - which will be the correct channel references for the dtt channels. i have the radio ones as well if you want them

Which folder do you put these into?

stanley1

picon foder, can be on usb stick (preferable) internal flash or hard disc.

irishgeo

my vu + is in germany now, i cant wait to start playing around with it.

so does it support any sata hard drive?

if i used the image above everyone else is using above, is it possible to set it to record something remotely via an android phone.

finally can anyone point to what my reading material should be?

jgc115

Fantastic, my Sundtek DTT stick has just arrived so will be checking this new Vix 2.0 when time permits.

byte

Any opinion on the best value DTT stick to get? Ideas on good places to look would be nice too (I've browsed eBay, but quite a few UK sellers seem to charge a LOT for delivery to Ireland).

dnme

dnme wrote: »

byte, the Nova is a fine piece of kit, got mine off ebay delivered for 30 quid and he threw in a second bigger aerial. You can buy em new for 40-50. They already work with pli and are promised (to a model) in 1.4. Sound investment. Also come with full size aerial slot so no annoying adapter etc

Possible steal - Spain (no customs, only a few hrs left)

byte, did you not bid on this link I gave you a few days ago? I think it went for buttons

j4vier

elara have the nova t stick for 36e to collect, i am getting mine tomorrow, got that one because i plan to add it to a dm500hd and it seems to be one of the most supported by the groups like dream elite
handy if you are around dublin i guess otherwise everyone charges around 10e delivery

otherwise amazon has it for 32 gbp
http://www.amazon.co.uk/Hauppauge-WinTV-NOVA-T-USB-Stick-freeview/dp/B000F8RPQE/ref=sr_1_1?ie=UTF8&s=computers&qid=1297380684&sr=8-1
i think you get free postage

byte

dnme wrote: »

byte, did you not bid on this link I gave you a few days ago? I think it went for buttons

No, as a Vix 1.3 user, I had left it until I was sure the new ViX would support it. It was a good price alright...

That said, it's not that much different to a new one from the Amazon link posted by j4vier (thanks).

I think I shall order it over the weekend.

RogerThis

ViX 2.0 have went backwards with permanent timeshift and the latest EPG.

Without me installing OpenPLI and checking myself. What are the advantages of using ViX 2.0 over OpenPLI 2?

irishchris

There does seem top be an issue with the pts at the moment as it is a pli issue and has affected vix which will be looked at. No issue with epg on vix??? What epg issue are you having mate?

joolsveer

RogerThis wrote: »

ViX 2.0 have went backwards with permanent timeshift and the latest EPG.

Without me installing OpenPLI and checking myself. What are the advantages of using ViX 2.0 over OpenPLI 2?

What is the issue with permanent time shift?

RogerThis

joolsveer wrote: »

What is the issue with permanent time shift?

To be able to rewind, you need to press 'Pause' then 'Play' and finally 'Rewind'.

This has always been the way in OpenPLI.

stanley1

network test shows local connection as failed but I have been able to download updates with no issues.