Photos of your Airsoft equipment.(NO DISCUSSION)

OzCam

Yes, it's still a really stupid logo but I wanted one anyway to remember a great Olympics by.

Darth Phoenix

GnP 870 Maddog



The weird and wonderful, I got this recently the other day simply because it was weird looking. A mate tolded me it was based on a real steel version. A Mossberg 500 Bullpup. I've no idea of make of this particular one but instead of a tri-shot this is a quad shot .



Pic of the quad shot barrel's



Just thought I show ye..


DP

OzCam

A little something for the black ensemble, for those occasional SWAT roles. Black is always fashionable.


Some gold old British pluck.

This was photographed during those few minutes of bright sunlight this morning. The rhubarb-and-custard colour scheme is more subdued in normal light than it appears here.

The one and only Strike-Hold! One of my favourite sites.

If anything, this one is too subdued. The brown and green could do with a smidge more contrast. There are other colour options too, though I think all of them could be tweaked.

Finally, the legendary Op Lion Claws.

Sorry about the blue tint. The patch is actually just black and white.

thermo

Attachment not found.

Stercus Accidit

thermo wrote: »

Attachment not found.

On that note...

hightower1

The new GBB TM mp7 arrived today. Rock solid build quality, nice blowback and astonishing accuracy. Would highly recommend to anyone.

jayod30

EXTERNALS

Dytac Vltor II uppper, G&P LMT lower receiver, Magpul trigger gaurd, Dytac Vltor Gas block, Magpul UBR stock & ladder rails, G&P TD pistol grip, outer barrel, Vltor flash hider & iron sights, Madbull charging handle, anti rotational pins, Surefire 5" silencer.

INTERNALS

G&P shell, Kanzen 8mm bearings, Systema cut off lever & ported cylinder, AWS Stealth Mosfet, G&P shims, tappet plate, selector plate & air nozzle, G&P ARL, KA spring set, X-High Tech Aluminium double o'ring piston head, Azimuth hard piston (full steel teeth), Ultimate cylinder head, Prometheus Neo Hop unit, G&G green rubber & TM nub, Prometheus 6.03 363 tbb, Tienly GT40000 motor and last but not least SeigeTech 10:44:1 gear set.









Finally joined the C.R.C club:D All jokin aside, built from scratch by Rooky1 and all I can say is what a piece, I'm in heaven:P Cheers Carl, your a f**king legend

DJDylan106

Well, a few months ago i decided to sell my SRC M4 Shorty,
But then, a life changing event differed me from my decision, i skirmished it for the first time and fell in love.
There was a noise in the gearbox so i decided to get it serviced and got the motor replaced
Now i have decided to keep it and turn it into the gun i always wanted. As of now i have turned it from this :



To this :





• A Swiss Arms Lunette 4 x 40 Scope
• A Blackwater Compact Extendable Bipod
• A Spartan 290mm Suppressor

I know it's not much but it's enough to keep me going for the moment,
have another few bits on the way aswell, just couldn't hold myself back.
And i know it's nothing compared to yer' own amazing machines but i thought i'd give yas a look anyways,
Amazing guns lads,

Dylan

stigmau5

A family photo
from left to right

kev-Oakridge

well I finally got my new toy, can't wait to try it out this weekend

Stercus Accidit

SRC Tokarev - Heres a quick review http://samsairsoft.blogspot.ie/2012/11/src-tt-33-tokarev-review.html

Summary is that it works but is rough around the edges.

Rooky1

Just finished putting this together:D



Externals;
GnP KAC rear sight post
GnP MRE Rail System
GnP Outer Barrel plus sight post
GnP M4 Upper Receiver
Magpul MIAD Pistol Grip
Magpul PTS Lower Receiver
Rail Covers (can't remember the make)
Madbull DNTC FSC 556 Flash hider
Magpul PTS CTR Battery Stock (The large battery cover removed and replaced with medium stock cheek riser)
Gear short front grip (much comfier than it looks)
Acog 4x sight with Doctor red dot sight
Magpul PTS modular sling adapter





Internals;
Guarder hop unit and 6.02 TBB
Madbull blue hop rubber and nub
Full Systema gearbox
16:1 hi-speed flat Systema gears
X-High Tech piston
Systema Magnum motor
AWS Raptor mosfet



Performance;
Using a Turnigy Nano Tech 7.4v 2000mah 15-25c lipo battery and .2 bbs
Firing at 326fps @ 23 a sec

Rooky1

I picked this used Magpul Masada up a while ago and was trying out a few gear sets in it.
Finally put it back together.:rolleyes:



Magpul rear sling hook.
Magpul folding adjustable stock.
Magpul AAC m4-2000 silencer.
Magpul CQB barrel set.
Magpul MVG Front grip.





Internals;
Wii Tech hop unit and air nozzle.
Prometheus 6.03 tbb.
Prometheus red hop rubber.
X-High Tech full metal tooth piston. (short strokeed)
Unknown bearing piston head.
Systema Magnum motor.
SiegeTek 14.09:1 gears. (short stroked)

Thehandviolent

New Hk 417:





Tm AUG high cycle:



**** quality pics, will prob replace with better.

Nuke1973

Just arrived today, need to put in a spring and chrono. Will post up better pics soon.

thermo

010.JPG

011.JPG

012.JPG


inokatsu 1911, without a doubt the nicest airsoft pistol i have ever shot.

Just a Plinker

Just finished modding an Ares ag80 launcher to fit my G&G l85
http://pix.ie/plinker/album/455777

zerohamster

My DMR project.

CpcRc

My latest and possibly last incarnation of my M4. Better quality pics of it and the rest of my collection will be posted when I have the time this month or next.

cascar

Next generation tm scar came in today, absolute great gun to shoot. Scar silencer, pdi 6.01 barrel fitted. Cant wait to test out the range

Nuke1973

Nuke1973 wrote: »

Just arrived today, need to put in a spring and chrono. Will post up better pics soon.

swiftblade

Not the most original thing ever, but meh. I still like it.

King Arms "1928" Thompson.

Nuke1973

G&P VLTOR Sentry with SOCOM ACE stock, Gemtech Halo Silencer & G&P 4X ACOG


G&P Stoner 63a LMG


GSG 522 blowbackwith UMG Stock, folding foregrip and PEQ

stigmau5

New items in collection



TM MP7


VFC HK417D


TM SCAR H Recoil Engine


Celcius CTW MX2
Madbull PWS 556 Flash hider
- Magpul PTS ASAP plate
- Dytac 10.5" Nighthawk Dimpled Outer Barrel in Black
- FCC Gen 2.0 Motor
- eTiny Mosfet board
- Action Railed Gas Block
- Madbull JP Rifles 7" Handguard in Black
- Dytac Short Rail Section
- G&P Polymer Trigger Guard in Black
- FCC Reinforced Sun Gear
- STTS/MDD Hop Unit for CTW/PTW with Celcius Reformation II Barrel 6.00mm
- FCC/Velocity M90 Cylinder with Systema Cylinder Head/Nozzle set (300fps)
- FCC/Velocity Magpul MOE Pistol Grip in Black
- ACM ACOG 4x Scope

biz96

G&G GR15 TAN
After a few hours...:eek:

E Deans

005.JPG

006.JPG

007.JPG

008.JPG

KwackerJack

G17 Spring

M15A Electric

[IMG][/img]

stigmau5

Standard GnP parts used (cylinder head/air nozzle/selector plate/cut off lever/tappet plate) Cylinder head fitted with a sorbo pad.


GnP Gearbox shell (polished)


Modify ceramic bearings (x4) Stainless bearings (x2)

Trigger modified for shorter pull

Siegetek 14.09:1 short stroked(2) gears


AWS Stealth mosfet


Element bearing spring guide


Element POM piston head with AOE spacer

SHS O’ring

Systema Area 1000 Teflon ported cylinder


Systema piston (modified)

New GnP shims

Ultimate M100 spring with Siegetek spacer

Modified GnP ARL plus spring

Systema Energy Motor

Using standard barrel and hop unit (modified arm)

Guarder clear hop nub

Madbull Blue hop rubber.

Firing at 326fps and 26 a second on a 7.4v 2000mah 15-25c lipo battery.

Big thanks to Carl

Darth Phoenix

Howdy ,

Bought this pistol secondhand for a pressie for a buddy of mine and did a small bit of sanding to little area's to make it pop a bit but not too much.

Just messing around really,


Here's the before:





Now the after:








Thanks for looking

DP

stigmau5

My new KWA KRISS






it is savage, i mean its S**t dont get one :P