Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

SMOK RPM40-Has anyone tried it?

  • 15-08-2019 9:50pm
    #1
    justinbellford
    Registered Users Posts: 50 ✭✭


    I am a vaper who switches styles depending on my social situations. At home I will be using a straight to lung device, at work or while out, I will use a pod system.

    I just found this kit and in going over it, it sounds like a real winner, especially since I use a Nord already, so I am stocked up on coils. I like the design as well.

    I am just curious if anyone has any pros or cons or info I should know about before I fully commit to a purchase.


«1

Comments

  • #2
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Maybe do some research on it first, lack of youtube reviews doesn't look good. (is it newly released)?

    Very negative comments on that brand on discord.
    Everything by smok is defective
    Heads up for future
    Smok has very poor quality control

    Don't buy a smok product again

    if you dont get burned by smok at least once ur not a true vaper


  • #3
    Thecageyone
    Registered Users, Registered Users 2 Posts: 6,756 ✭✭✭Thecageyone


    corkie wrote: »
    Maybe do some research on it first, lack of youtube reviews doesn't look good. (is it newly released)?

    Very negative comments on that brand on discord.

    Whoever wrote that is a bit of a dope tbh - wth is a "true vaper"? :confused: I bet they wear a snap-back and still post 'hand-checks' :D

    People have been slating Smok for years, yet 2 of the better mods I've owned were made by them. Their tanks - not so much. I still have a Smok Alien that I bought about 3 years back and it's working fine still, also have the Species - cracking little mod, tiny, easy to use, has never failed me .... I don't know why people slam them so much, think it's because they continuously put out similar tanks about 3 times a year, very little difference to them, all aimed at cloud chasers with little dedication to flavour. Their mods though, are hard to fault. I wouldn't go by people ranting on reddit or discord. If you look around you'll find people slating Aspire, VooPoo, Geekvape etc ... because they had one bad experience.

    Smok devices are no worse than any other, I've had worse experiences with Eleaf, IPV, Kangertech and Aspire - they're all thrown together in China and there will be dodgy copies now and then.

    I haven't tried this one, but looks alright. The Nord actually got good reviews from what I've seen, so if you liked that you will probably like this one.


  • #4
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    SMOK RPM40 Pod Mod Review - See the World's FIRST Hands On Review!




    And another alternative?

    They Nailed it. Aspire Breeze NXT AIO Review



    www(dot)aspirecig(dot)com/aspire-kits/aspire-kits609.html

    Downside, only one pod, so changing ejuice flavor would be difficult. Only one type of coil at present.
    5.4 ml tank capacity ~~~ So getting in the EU with regulations, is going to be difficult? <<< Import only.




    I'm Not affiliated with any store or reviewer sites.


  • #5
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Smok RPM 40 Kit The Real Pod Mod FIRST IMPRESSIONS AND UNBOXING




    Or another alternative? But a pain to fill with juice. (or see levels).

    RDTA Pod!! Jester Pod Build & Wicking Tutorial - Vapefly








    I'm Not affiliated with any store or reviewer sites.


  • #6
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie





    ^^^ Not really suitable for MTL! (At present) No airflow control!




    ## I'm Not affiliated with any store or reviewer sites. ##


  • Advertisement
  • #7
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Alternative option if you not invest in SMOK/Nord Coils?

    Vinci Mod Pod by Voopoo!




    Like the caliburn, has button and draw activation.

    Can be got with 5pcs Coils for approx €36.15 on aliexpress.

    https://www.aliexpress.com/item/4000121613186.html
    ^^^ Price around other sellers as well.


    Edit: -
    Compatible with PnP-C1/PnP-R1/PnP-M2 coils and PnP-VM1 Mesh Coil for your pod.

    Although variety of supported coils, they recommend low nic <10mg or High Salt. Put's me off ordering it. Probably wait for more reviews.


    Edit 2: -

    What is the point of these mods that can do 40watts but then limit your use of it based on the coil used. No coils available yet that can handle it, and your blocked from over powering, so you don't burn out the coil. Gimmicky device.

    ## I'm not affiliated with any store or review sites. ##


  • #8
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    ^^^ Ordered the above anyway on Monday. Standard version, not TPD tank(I hope/requested) €22.69
    + Ordered 5 * 'PnP-M2 0.6ohm' €11.14 coils from another seller


    Wicked Vapes in Cork Now stock the 'Caliburn' + pods for it.

    Also the new 'Smok RPM40'

    Haven't a clue of the pricing, because not listed on website yet.
    Saw posts about them on facebook page.




    ## I'm not affiliated with any store or review site. ##


  • #9
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    VOOPOO Vinci Pod System (Best Pod Kit FANTASTIC!!!)




    Smok RPM40 Pod Vape Kit Review vs Voopoo VINCI





    Glad I ordered the 'Vinci'!




    ## I'm not affiliated with any store or review site! ##


  • #10
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    I bought the Smok RPM because it uses the Nord 0.6 coils which I have plenty of & these coils will be in stock everywhere IE/UK.

    The main reason I picked the Smok & not the DeVinci is because there is an RBA for the Smok which those reviewers never mentioned,a very important factor when buying an IOA device.


  • #11
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    corkie wrote: »
    Alternative option if your not invest in SMOK/Nord Coils?
    youdipstick wrote: »
    I bought the Smok RPM because it uses the Nord 0.6 coils which I have plenty of & these coils will be in stock everywhere IE/UK.

    The main reason I picked the Smok & not the DeVinci is because there is an RBA for the Smok which those reviewers never mentioned,a very important factor when buying an IOA device.

    I'm not invested in the Nord system, also don't see myself building coils in the near future. (No tools, i.e. clippers etc).

    I wonder how SMOK is going to implement it. Maybe something like this: -



    Jump to https://youtu.be/C7-6M4NgAI4?t=467 for demo of an adapter for building.




    ## I'm not affiliated with any store or review site. ##


  • Advertisement
  • #12
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    The RBA would be same as the one in the video,10 years ago I did my own builds,I had a roll of kanthal,a set of precision screwdrivers,a lighter & nail clippers,that was my tool set for building.
    I was using any old cotton balls from the chemist & it all worked out great,except for the tanks,they always leaked back then:D:D

    You probably have these tools in your home,buying ready made coils are handy today.


  • #13
    justinbellford
    Registered Users Posts: 50 ✭✭justinbellford


    Sorry I fell off the earth, guys. Thank you so much for all the feedback! I ended up picking up the RPM and so far I am really liking it.


  • #14
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Smok RPM RBA Base for RPM40 & Fetch




    I wish they did an adapter like in the 'Tauren X Pod' above.


    Edit: - Jai Haze rips through this implementation.





    Also checked the the price for RPM40 in 'Wicked Vapes (Cork)' was quoted €50.





    ## I'm not affiliated with any store or review site ##


  • #15
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    Just what I've been waiting for Corkie,shame the rba doesn't have an adaptor to turn it into a 510,no big deal,I'll just space my coils.

    Let me know if you see this rba up for sale anywhere,I'll keep checking myself.

    RPM40,I've been using it for a few weeks with the nord coils & it's perfect.

    I used the RPM coil once but the juice I used was horrible,I binned that juice right away,cheap sh1t.
    Washed out the RPM pod & I'll try vaping through the used coil with another juice to see if it clears,I only have the one RPM coil,I didn't want to buy any because I knew the rba was coming.

    You can buy the RPM40 from Efag for €39 https://www.efag.ie/e-cigarette-starter-kits/1041-e-cigarette-smok-rpm-40-pod-mod-1500mah-starter-kit.html#/84-color-black


  • #16
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    SMOK RPM 40 RBA Coil ~~~ Can be pre-ordered ~~~ or ali


    https://www.heavengifts.com/product/SMOK-RPM-40-RBA-Coil.html €6.74


    Original SMOK RPM RBA Coil DIY Head Evaporator For E Cigarette SMOK RPM40 Pod Vape System Kit Vaping €8.16

    in stock Original SMOK RPM RBA Coil DIY Head Evaporator For Electronic Cigarette SMOK RPM40 Pod Vape System Kit Vaping €8.06


    Updated my post with another review.



    ## I'm not affiliated with any store or review site ##


  • #17
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    I'll wait til they sell them in the UK,I can't stand that crying arsed jai haze,we all know it's not for beginners,I'm amazed he even tried 30 gauge,even 28 is too thin for this,I use 22 or 24 to get the ohms down to .5 ish.
    Maybe he thinks he's talking to primary school kids.


  • #18
    jhonwik630
    Registered Users Posts: 1 ✭jhonwik630


    Yes i tried it in fact i'm currently using it.
    Smok RPM40's structure is suggestive of a contracted down Smok Cuboid box mod and to be completely forthright, it looks smooth, splendidly ergonomic, and pocket-accommodating


  • #19
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Another RBA alternative!? >>> Artery Nugget AIO & RBA Base Tutorial




    includes an adapter so you can dry fire on another mod.


    youdipstick wrote: »
    .... ,I can't stand that crying arsed jai haze,.....

    Include the review, just to give another view point, if you like him or not is beside the point.







    ## I'm not affiliated with any store or review site ##


  • #20
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    corkie wrote: »
    Another RBA alternative!? >>> Artery Nugget AIO & RBA Base Tutorial




    includes an adapter so you can dry fire on another mod.





    Include the review, just to give another view point, if you like him or not is beside the point.







    ## I'm not affiliated with any store or review site ##

    Haze was wrong about the rba,Fagan built a contact coil & was able to fire up the coil.Smok RPM seems to be the only one that can lock the up n down buttons.

    https://www.youtube.com/watch?v=ZROc49iadJE&t=0s


  • #21
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    ^^^ Saw that, but he built it on the FETCH, where it was possible to test the coil by looking down the drip tip.

    Wonder if the same could be done on the RPM40?


    Also on the 'Vinci' you can lock the device, but also able to 'Draw' activate the device while locked (if in draw/both mode).

    Don't think you can fire the RPM40 when locked?


  • Advertisement
  • #22
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    There's 2 ways to lock the RPM...

    Up n Down button pressed simultaneously will lock the wattage but you can still fire it...

    Press the fire button 3 times & nothing will work,just completely locked & safe.


  • #23
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Received my 'Vinci' on Monday! Possibly a faulty device.

    After half a day of use the auto draw feature stop functioning. I put down to eliquid/moisture getting into the mechanism.

    I received the alternative coils (PnP-M2 supported) to day for it. But wouldn't register on the device/fire when placed on tank. Coils are fine, because I place on the contacts without them in the tank and they register fine.

    Even the alternative coil supplied (PnP-R1) seems to be not reading as well now. Even with it working yesterday.


    Have to contact the aliexpress seller, didn't get around to acknowledging receipt of order yet. So could still raise a dispute, if the seller is not responsive.




    Other than possibly faulty device, I like the compactness of it and the vape from it. Just reluctant to order more coils for it.


  • #24
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    ..... Could you please send us a video to describe your problem? Please send video on Yutobe, and give us the link......

    Message shortened above.

    Here is the video, i created as requested. Recorded on my laptop. (Don't have other cameras, other than phones).

    That video will be removed, taken down once they reply.


  • #25
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    ^^^ Just to follow up, got a replacement tank €5 in local vape store and it resolved my problem. So faulty tank shipped with device.

    This looks interesting: -



    Hotcig Marvel RBA Coil. Looks like it maybe compatible with the Vinci?

    As it is so new, not readily available yet. Some sites say the coil is suppose to be compatible with the RPM40 RBA, but from that video, I don't see how. That would mean the RPM40 coils would fit in the vinci?


    Edit: - Forgot to mention that 'Wicked Vapes (Cork)' had (sold out at present) 'Vinci' @€;45 in stock.

    Or [e-shop.ie] VOOPOO VINCI Mod Pod VW Kit 1500mAh Price Eur 44.99

    ## I'm not affiliated with any store or review site ##


  • #26
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    Just ordered the RPM40 RBA from here https://djvape.co.uk/products/smok-rpm-40-rba-coil-0-6ohm


  • #27
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Turn your Smok RPM40 pod into an adapter for your rba, it works!!



    3pc/6pc SMOK RPM40 Empty Pod Cartridge 4.3ml from €7.33






    Just as a followup, I'm really enjoying the vape from my 'VooPoo Vinci'.

    PnP-VM1 0.3Ω 32-40W <10mg (have used with 6 and 12)
    ^^^ Warmer vape with good flavor.

    PnP-R1 0.8Ω 12-18W Nic Salt < 35mg
    ^^^ Colder vape and muted flavor (maybe using wrong pg/vg ratio), small wicking holes.

    PnP-M2 0.6Ω 20-28W ≤ 25mg
    ^^^ My preferred coil, nice flavor and not as warm as 0.3

    Other coils available PnP-C1, PnP-M1 and also newer


    Powered By A Single 18650 Battery 'VINCI X Mod Pod' with also PnP-VM4 0.6Ω

    That VM4, gives the same power range as the M2?


  • #28
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    RBA base due out with the 'Vinci X', which should be compatible with the 'Vinci' & 'R' as they use the same tanks and coils.


    https://i.imgur.com/LmAvQwI.jpg

    75174686_1385198814982333_7210490181420318720_n.jpg?_nc_cat=102&_nc_oc=AQmoKk_4uIoY-5C_4LVtNiXVO7kMzcdvOjFXiL49GL5BxkGmrOua-JXTGLVTuIyKpYI&_nc_ht=scontent-dub4-1.xx&oh=0af8a44bf46282d9bf4d1b2dfe2dc674&oe=5E4A2F26










    ## I'm not affiliated with any store or review site. ##


  • #29
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    VooPoo Vinci Fam: - PnP-RBA ~~ listed on website ~~ Not yet available to order.

    pnpCoils1-pic3.jpg
    PnP-RBA
    MTL/Half-DL
    Resistance：DIY
    Type：DIY

    Applicable Products：VINCI / VINCI R / VINCI X

    www(dot)voopoo(dot)com/pnp-coils

    Get a select coupon €1.83 (29th - 3rd) from voopoo(dot)aliexpress(dot)com/store/5065244







    ## I'm not affiliated with any store or review site. ##


  • #30
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Got a set of tools (11/11) for PnP-RBA due out.
    youdipstick wrote: »
    The RBA would be same as the one in the video,10 years ago I did my own builds,I had a roll of kanthal,a set of precision screwdrivers,a lighter & nail clippers,that was my tool set for building.
    I was using any old cotton balls from the chemist & it all worked out great,except for the tanks,they always leaked back then:D:D

    You probably have these tools in your home,buying ready made coils are handy today.
    youdipstick wrote: »
    I'll wait til they sell them in the UK,I can't stand that crying arsed jai haze,we all know it's not for beginners,I'm amazed he even tried 30 gauge,even 28 is too thin for this,I use 22 or 24 to get the ohms down to .5 ish.
    Maybe he thinks he's talking to primary school kids.



    XFKM X9 Mini Vape DIY Tool Bag Tweezers Pliers Wire Heaters Kit Coil Jig Winding For Packing Electronic Cigarette Accessories
    Picked:- Package of Electronic Cigarette DIY Tool Kit 3: @ €7.73

    Came with 26Gauge A1 wire. Hopefully suitable for the PnP-RBA?

    I will see how I get on with rebuilding the RBA and in the future might invest in a dual battery mod.

    How are you getting on, building with the RPM RBA?


  • Advertisement
  • #31
    youdipstick
    Registered Users, Registered Users 2 Posts: 2,555 ✭✭✭youdipstick


    corkie wrote: »
    Got a set of tools (11/11) for PnP-RBA due out.







    XFKM X9 Mini Vape DIY Tool Bag Tweezers Pliers Wire Heaters Kit Coil Jig Winding For Packing Electronic Cigarette Accessories
    Picked:- Package of Electronic Cigarette DIY Tool Kit 3: @ €7.73

    Came with 26Gauge A1 wire. Hopefully suitable for the PnP-RBA?

    I will see how I get on with rebuilding the RBA and in the future might invest in a dual battery mod.

    How are you getting on, building with the RPM RBA?

    I bought the rba base a month ago & it's still in the box,I've been in & out of hospital for the past month,no time for builds yet,I'm still using the same coil that came with it,I also have 2 x rba's for the 2 Smoant Pasito's & still using the coils that came with it,been using the Smoant's & the Breeze2 in hospital,fantastic vape from them both,the RPM coil & Nord coil are great as well,they say the rba's are even better.


  • #32
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    VooPoo: PnP-RBA been released from today!!

    496923.png

    ^^^ From above, looks like a post-less deck?




    Visit: - https://www.voopoo.com/service and update the firmware on the device to support the RBA mode. <<< For 'Vinci'.
    after u upgrade your device , tick it 4x times to toggle rba on off

    From a post on facebook, maybe not available to order yet.

    Edit: - In RBA mode, your watts are not locked to recommended max by the coil in the device.





    ## I'm not affiliated with any store or review site ##


  • #33
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Unofficial RBA for RPM/Vinci

    Came across this when looking for PnP-RBA



    Mechlyfe COMPACT RBA Atomizer Coil Head 510 thread connection design Cores for rpm pod/vinci pod Vaping tank

    or

    1pcs/2pcs/3pcs Electronic Cigarette COMPACT RBA Atomizer Cores 510 thread design Coil Head for rpm pod/vinci pod


    9717700-3.jpg

    rba3-550x550.png



    Above maybe a better option for the RPM, than official !!??






    ## I'm not affiliated with any store or review site ##


  • #34
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Been pricing around for the PnP-RBA kit!


    VOOPOO PnP RBA Coil DIY MTL Half-DL Resistance & PnP-RBA prebuilt Wire 0.6ohm for VINCI/VINCI R/VINCI X

    €7.57 for One or €10.57 for two.

    Package includes: -
    PnP-RBA Coil:
    2 x Screw
    1 x Screwdriver
    2 x Silicone loop
    1 x 0.6Ω Heat wire
    1 x Coiling Pole
    1 x Cotton

    €5.41 for 10 * PnP-RBA Prebuilt Wire


    H38a3ed3a5e2a43638749377dc904643e3.png


    ^^^ Above seller is the only one, i found so far that listed contents.

    Edit: -

    Video posted today on FB for the building on it.
    https://www.facebook.com/Voopootech/videos/993272187708206/






    ## I'm not affiliated with any store or review site. ##


  • #35
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Also a

    VXV 510 Adapter for Smok RPM 40 Kit

    20191205164936.jpg

    or

    VXV 510 Adapter for VOOPOO VINCI / VINCI X

    vxv_510_adapter_for_voopoo_vinci_vinci_x_kit_1_.jpg


    Have been reported on FB. If you go with the 'Mechlyfe' RBA you could dry fire them on the devices or put another tank on top?



    Edit:-

    Found this seller for: - 510 adapter For Vinci / Vinci X pod RTA RDA Atomizer Vape Accessories €4.57 (or €7.31 for 2) (+ Shipping costs).






    ## I'm not affiliated with any store or review site. ##


  • #36
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    corkie wrote: »
    Found this seller for: - 510 adapter For Vinci / Vinci X pod RTA RDA Atomizer Vape Accessories €4.57 (or €7.31 for 2) (+ Shipping costs).

    Above link also has a version for the RPM!


    Another clone of the RPM40, with flashing lights (battery draining!!??).
    ReeWape also do a RBA with 510 connector for the RPM40.

    Also for Vinci: - http://www.reewape.com/ruok-rba-coil-for-vinci-vinci-x-p0241.html






  • Advertisement
  • #37
    jonski
    Registered Users, Registered Users 2 Posts: 6,401 ✭✭✭jonski


    I know this is slightly off topic but the Aegis Boost is a pod mod that has a Rba that looks like it could be interesting ........ being Aegis I just have to wait 6 months until they bring out a version with removable battery ;)


  • #38
    Dr Bill V1.5
    Registered Users, Registered Users 2 Posts: 1,185 ✭✭✭Dr Bill V1.5


    I'm expecting this tomorrow

    https://www.ecigone.co.uk/pod-kits/think-vape-zeta-aio-60w-pod-kit

    and also the rba setup

    https://www.ecigone.co.uk/think-vape-zeta-aio-rba-coil

    The last pod/aio I had was the Smoant Pasito which was a disappointment so hopefully this is an improvement.
    It has a nice selection of stock coils,an rba, single removable 18650 and wattage adjustable upto 60w.

    More to follow :)


  • #39
    jonski
    Registered Users, Registered Users 2 Posts: 6,401 ✭✭✭jonski


    Dr Bill V1.5 wrote: »
    I'm expecting this tomorrow

    https://www.ecigone.co.uk/pod-kits/think-vape-zeta-aio-60w-pod-kit

    and also the rba setup

    https://www.ecigone.co.uk/think-vape-zeta-aio-rba-coil

    The last pod/aio I had was the Smoant Pasito which was a disappointment so hopefully this is an improvement.
    It has a nice selection of stock coils,an rba, single removable 18650 and wattage adjustable upto 60w.

    More to follow :)


    Ok , that looks interesting ....must have a look on youtube for a review . The Zeta name rings a bell .

    Edit: it was the Xeta I was thinking of


  • #40
    Dr Bill V1.5
    Registered Users, Registered Users 2 Posts: 1,185 ✭✭✭Dr Bill V1.5


    jonski wrote: »
    Ok , that looks interesting ....must have a look on youtube for a review . The Zeta name rings a bell .

    Edit: it was the Xeta I was thinking of

    jonski I'll let you know my thoughts on it and then promptly sell it to you:)


  • #41
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Catch all thread for AIO!
    jonski wrote: »
    I know this is slightly off topic but the Aegis Boost is a pod mod that has a Rba RDTA that looks like it could be interesting ........ being Aegis I just have to wait 6 months until they bring out a version with removable battery ;)

    Nothing really off topic, I been posting alternatives since the start of the thread.



    Dr Bill V1.5 wrote: »
    I'm expecting this tomorrow

    https://www.ecigone.co.uk/pod-kits/think-vape-zeta-aio-60w-pod-kit

    and also the rba setup

    https://www.ecigone.co.uk/think-vape-zeta-aio-rba-coil

    Billet Box Style/Clones probably should have there own thread. But not knocking its post here?
    i.e. Dotmod dotAIO






    ## I'm not affiliated with any store or review site. ##


  • Advertisement
  • #42
    corkie
    Registered Users, Registered Users 2 Posts: 7,631 ✭✭✭corkie


    Mechlyfe RBA base for Voopoo Vinci presentation ~~~ Another AIO alternative!



    Handy video for anyone who ordered this RBA!
    Answered some questions on the type of wraps + diameter etc.



    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




    Or Vaping with vic review/build: - https://www.youtube.com/watch?v=6VxsQH6i_5c






    ## I'm not affiliated with any store or review site. ##


  • #43
    jonski
    Registered Users, Registered Users 2 Posts: 6,401 ✭✭✭jonski


    Atmizoo , who make the Vapeshell rba for the BilletBox are now making a RBA for the DotAIO called Dotshell .

    And while I am mentioning the Dot AIO they are bringing out another version called the SE which will be around the 60 euro mark ...... the original being around the 100 euro mark .


  • #44
    conjon
    Registered Users Posts: 457 ✭✭conjon


    jonski wrote: »
    Atmizoo , who make the Vapeshell rba for the BilletBox are now making a RBA for the DotAIO called Dotshell .

    And while I am mentioning the Dot AIO they are bringing out another version called the SE which will be around the 60 euro mark ...... the original being around the 100 euro mark .

    Ordered the SE yesterday. Its a looker. That Atmizoo is released tomorrow.


  • #45
    jonski
    Registered Users, Registered Users 2 Posts: 6,401 ✭✭✭jonski


    conjon wrote: »
    Ordered the SE yesterday. Its a looker. That Atmizoo is released tomorrow.

    Where did you order from ?


  • #46
    conjon
    Registered Users Posts: 457 ✭✭conjon


    jonski wrote: »
    Where did you order from ?

    https://www.lepetitvapoteur.com/en/all-our-kits/7752-dotaio-se-dotmod.html

    Free delivery and they've 5 free coils with it too. If you create an account it's 1 euro for every 10 spent. It's a real looker Jonski.


  • #47
    conjon
    Registered Users Posts: 457 ✭✭conjon


    conjon wrote: »
    https://www.lepetitvapoteur.com/en/all-our-kits/7752-dotaio-se-dotmod.html

    Free delivery and they've 5 free coils with it too. If you create an account it's 1 euro for every 10 spent. It's a real looker Jonski.

    NOUVELAN20

    For 20% off.


  • #48
    jonski
    Registered Users, Registered Users 2 Posts: 6,401 ✭✭✭jonski


    conjon wrote: »
    Ordered the SE yesterday. Its a looker. That Atmizoo is released tomorrow.

    How are you getting on with the SE ? And how is it holding up ?


  • #49
    conjon
    Registered Users Posts: 457 ✭✭conjon


    jonski wrote: »
    How are you getting on with the SE ? And how is it holding up ?

    Still waiting on it Jonski. I thought it would have been here today, but I'm waiting on other orders too, so seems to be a
    postal backlog. Did you order it in the end? LPV also have the replacement panels and also had the Atmizoo RBA. It must have come in and gone straight away. Their sale is on for another week.

    Judging my what I'm seeing, that RBA is meant to be v good


  • #50
    jonski
    Registered Users, Registered Users 2 Posts: 6,401 ✭✭✭jonski


    conjon wrote: »
    Still waiting on it Jonski. I thought it would have been here today, but I'm waiting on other orders too, so seems to be a
    postal backlog. Did you order it in the end? LPV also have the replacement panels and also had the Atmizoo RBA. It must have come in and gone straight away. Their sale is on for another week.

    Judging my what I'm seeing, that RBA is meant to be v good


    I'm still mulling it over ....I don't need it.... and last year I was very good at not buying things I don't need .


  • #51
    Shinobollo
    Registered Users Posts: 472 ✭✭Shinobollo


    I got a Think Vape Zeta. Love it so much I've another on the way with a couple of spare tanks for swapping in / out once I find a suitable stopper for the tops
    Got the RBA for it as well, but not sure I'll be using it. Very small deck for my shaky hands :)
    It's tiny, so small it makes my hotcig r-aio look like a beast


  • Advertisement
Advertisement