Arcade 1Ups replica cabs thread

CiDeRmAn · 17-08-2018 4:05pm

Inviere wrote: »

Are they going to be hard to get do people think?

Impossible to say, I mean it's one thing to join a retro game group on FB, and be all proud of Sonic 2 running off of a raspberry pi onto a 55" flat panel set to 16:9 and quite another to invest in a arcade cab for €400,b even if it is scaled down.

Inviere · 17-08-2018 4:33pm

CiDeRmAn wrote: »

Impossible to say, I mean it's one thing to join a retro game group on FB, and be all proud of Sonic 2 running off of a raspberry pi onto a 55" flat panel set to 16:9 and quite another to invest in a arcade cab for €400,b even if it is scaled down.

In the eyes of collectors/enthusiasts, there’s prob not much in it

At the end of the day, it’s all emulation...albeit, one isn’t presented in a nice nostalgic envelope.

I don’t think it’ll be too hard to get these, perhaps I’m wrong but I would assume they’ll be made in quantities that’ll mean deman doesn’t outstrip supply. If Nintendo made them however....

Optimus Prime · 17-08-2018 4:39pm

I know from my own friends over the years a few of them have said they would love a cab but take up too much room, cost too much or are too much effort to fix when they break, so these might be a good option, if you can add games to them.. somehow.

Restricting them to a couple of games could be a deal breaker. something that big with only a few games on, in "normal" peoples houses might not be worth the space its taking up.

XsApollo · 17-08-2018 4:45pm

I’m definatley buying one.
Love all the retro arcade stuff , have a pi with a lot of Roms for mame, Mega Drive and SNES,
Wouldn’t be into having actual retro consoles but definatley would love a cab like this.

Skerries · 17-08-2018 4:55pm

I might wait till the guys on here do all the heavy lifting and figure a way to bodge a MAME Pi onto it

Doge · 17-08-2018 5:23pm

This review shows flimsy wood in the vertical panel on the front of the base. More of an issue if you buy one pre assembled and have it shipped, the flat pack should be fine.
And the speaker is only mono and on the player 2 side.

https://www.youtube.com/watch?v=8JWrqkCkN18

He kinda screwed up when he said the LCD panel is better than a CRT though. :pac:

Inviere · 17-08-2018 6:50pm

Doge wrote: »

He kinda screwed up when he said the LCD panel is better than a CRT though. :pac:

How he came to that conclusion is laughable. More so considering it appears to be a vanilla output on the screen, with zero filtering or processing going on (at least none I could make out on this tablet). Unfortunately if so, the display visuals are going to look pig ugly

Only a matter of time before the guts of this are ripped out and beefed up. Depending on what’s needed for this, it may still prove worth buying. At 17” though, it’s a bit small

Steve X2 · 17-08-2018 7:25pm

The whole thing looks very cheap and cheerful. Except it isn’t really that cheap for a few thin bits of wood, low quality looking 17” lcd and I assume low power Pi or system on a chip brains.

Optimus Prime · 17-08-2018 9:54pm

also if you where planning on taking out the insides and upgrading or whatever to hold more games, you are essentially just paying 400 for the shell, artwork and a few buttons.

Doge · 17-08-2018 11:14pm

Optimus Prime wrote: »

also if you where planning on taking out the insides and upgrading or whatever to hold more games, you are essentially just paying 400 for the shell, artwork and a few buttons.

And still stuck with a 17 inch monitor.

CiDeRmAn · 18-08-2018 9:17am

Might be as handy for me to add a spinner to my control panel.

o1s1n · 18-08-2018 12:44pm

The lack of any kind of scanlines or even attempt to emulate how the games should actually look would be more of a dealbreaker to me than the monitor size.

Is that broken piece of wood around towards the bottom at the front, where your feet would be? If so you'd very easily put your foot through that accidentally. I know I would anyway :pac:

Doge · 18-08-2018 2:37pm

After all the researching I'd love to build a sit down Mortal Kombat II cabinet with red t molding.

There's no space in the attic at the moment though so it would involve a clear out.

I'd have to get custom cab designed by Rich or someone, with a larger marquee than the bartops and 100mm speaker holes facing down. I've even sourced a 19" 5:4 IPS monitor that can be had cheap and has 6:ms response time. Getting a bezel made and having Raden showing in the sideart would need the right shape cab and would be a bit costly but worth it.

Ah one can dream!

CiDeRmAn · 18-08-2018 2:39pm

o1s1n wrote: »

The lack of any kind of scanlines or even attempt to emulate how the games should actually look would be more of a dealbreaker to me than the monitor size.

Is that broken piece of wood around towards the bottom at the front, where your feet would be? If so you'd very easily put your foot through that accidentally. I know I would anyway :pac:

And then...

eddhorse · 19-08-2018 5:34pm

€400 isn't that bad really considering.
There's a lot of home made cabs on adverts that are double that price.
Probably be extra for shipping though.

Doge · 19-08-2018 8:12pm

I was extremely close to buying pc components on eBay for a cab build today. But decided against it at the last minute as the cab would be against a shelving unit so would be a bit cramped and he side art wouldn't be seen. I'd love to build one just for the project but it would probably get little use.

Hyzepher · 22-08-2018 10:15am

Doge wrote: »

After all the researching I'd love to build a sit down Mortal Kombat II cabinet with red t molding.

There's no space in the attic at the moment though so it would involve a clear out.

I'd have to get custom cab designed by Rich or someone, with a larger marquee than the bartops and 100mm speaker holes facing down. I've even sourced a 19" 5:4 IPS monitor that can be had cheap and has 6:ms response time. Getting a bezel made and having Raden showing in the sideart would need the right shape cab and would be a bit costly but worth it.

Ah one can dream!

Actually just finished one myself a couple of weeks ago

KevW24601 · 22-08-2018 1:11pm

Hyzepher wrote: »

Actually just finished one myself a couple of weeks ago

That's cool! Could you fill us in on how you did that? I'd be very interested to know!

On the topic, I saw this video on YouTube this morning. Basically it confirms that the control panel is indeed mod-able so the sticks and buttons can be swapped out to suit one's preference. However, it doesn't seem possible to add more games directly onto the hardware because of its "bespoke" nature.

Still, this confirms that gutting it to a JAMMA cabinet seems pretty feasible. :P

Doge · 22-08-2018 6:36pm

Hyzepher wrote: »

Actually just finished one myself a couple of weeks ago

Any chance you'd upload some pics?

Would love to see it. I think MKII has the nicest artwork Ive seen besides the control panel.

Doge · 23-08-2018 4:39pm

This video gave me a few laughs.

The control panel is mame of shame worthy though,far too big, joysticks far too apart, too many controls and RGB illuminated joysticks and buttons.

https://www.youtube.com/watch?v=oTydZBIGAuk

Inviere · 23-08-2018 4:53pm

^^ ugh

The only thing decent about that is the open source frontend it’s running

Doge · 23-08-2018 6:04pm

Inviere wrote: »

^^ ugh

The only thing decent about that is the open source frontend it’s running

At least he used a CRT!

The RGB thing is a running joke with him btw.

KevW24601 · 23-08-2018 6:08pm

Doge wrote: »

At least he used a CRT!

The RGB thing is a running joke with him btw.

Hm.

The one thing I never get with these self-builds is the fascination with the LED light-up buttons. Or using obscene amount of buttons.

Inviere · 23-08-2018 6:47pm

Doge wrote: »

At least he used a CRT!

True enough

I knew the first crt wouldn’t work out though, svideo looks like cack when using it as a pc output.

Doge · 23-08-2018 8:29pm

Inviere wrote: »

True enough I knew the first crt wouldn’t work out though, svideo looks like cack when using it as a pc output.

Yeah thats true, I remember hooking an old dell laptop to our CRT via s-video and it was extremely blurry.

Inviere · 23-08-2018 9:48pm

Doge wrote: »

Yeah thats true, I remember hooking an old dell laptop to our CRT via s-video and it was extremely blurry.

Same here. Back when I added a dvd drive to my first ever pc, I figured sure I’ll just use the svideo out to watch the dvds on the big tv.....turned it off quick enough, looked awful.

Hyzepher · 27-08-2018 10:31am

Doge wrote: »

Any chance you'd upload some pics?

Would love to see it. I think MKII has the nicest artwork Ive seen besides the control panel.

Quality not great but shows enough. Pics of both the MK2 and Galaga I built from scratch.

Doge · 27-08-2018 10:36am

Hyzepher wrote: »

Quality not great but shows enough. Pics of both the MK2 and Galaga I built from scratch.

Excellent work and gorgeous cabs!

Thanks for posting them.

Inviere · 27-08-2018 10:56am

That's how you do it alright, really nice work

DaveyDave · 05-09-2018 12:57am

Wow I didn't think these cabs would be so small. I was expecting something like the Space Invaders cab in Token where I have to duck to see the screen. Nope, much smaller. Suppose it isn't all bad as it's more likely to fit in a bedroom or something.

Arcade 1Ups replica cabs thread

Comments