The WANTED Thread

DWG · 03-11-2015 11:33PM

bbsrs wrote: »

Hi All ,

I'm looking for a Scania R series (2004 - present) workshop manual. I've done all the google searches but haven't turned up anything , can anyone point me in the right direction?

Thanks.

Try here, some good PDF's

http://www.docs-library.com/pdf/1/scania-r-series-service-manual.html

hino john · 22-11-2015 08:48PM

looking for a good cab for a Renault 155-54 tx

hino john · 22-11-2015 08:57PM

HI LOOKING FOR A CAB FOR A RENAULT 155--54 MUST BE IN GOOD CONDTION IF ANY BODY KNOWS OF ONE

Wegian · 14-12-2015 11:46PM

Looking for someone to price the job of transporting a JCB 3CX from Dublin to Galway.

have2flushtwice · 29-02-2016 10:16AM

Wanted:
air conditioning radiator for a 1999 New Holland 8360, the one under the bonnet.

Testacalda · 12-05-2016 12:50PM

Looking for an older model Suzuki Vitara / Escudo. The '88 - '98 model. Really just want it for mechanical parts so something on the cheap end of the spectrum. Prefer a SWB 1.6 petrol but a LWB or a diesel would do.

Anybody have one in the leinster area or close to. Not many on donedeal or adverts and Id rather not treck to Donegal for one!

kerry cow · 15-05-2016 08:41PM

Looking for lowest hour jd 7810 or jd 7710 in ireland , genuine hours only

farmerjj · 19-05-2016 08:17AM

kerry cow wrote: »

Looking for lowest hour jd 7810 or jd 7710 in ireland , genuine hours only

Pointless, clocks can be easily stopped

kerry cow · 17-07-2016 02:43PM

Agree with you .but was hoping someone would come on here and say they have one or their neighbour has one . That way you know what you are getting . Got a 6820 last year with 1800 hrs on clock from a builder .good buy

Matt_Trakker · 09-08-2016 03:02PM

Hello

Anyone know where I could order some Zetor merch online?
Tried the company site in Czech but they only deliver within Czech, same goes for the German website

Something like this for me auld lad:

$_1.JPG

TalkingBull · 17-08-2016 10:25PM

Matt_Trakker wrote: »

Hello

Anyone know where I could order some Zetor merch online?
Tried the company site in Czech but they only deliver within Czech, same goes for the German website

Something like this for me auld lad:

ww w.ebay.ie/sch/i.html?_odkw=&_osacat=52365&_from=R40&_trksid=p2045573.m570.l1313.TR10.TRC0.A0.H0.Xzetor.TRS0&_nkw=zetor&_sacat=52365

www.

Stoning by Robbie 2011 · 26-09-2016 11:51PM

Looking for track machine with the blade and motors at same end, cash waiting.

stock> · 27-09-2016 05:25AM

Stoning by Robbie 2011 wrote: »

Looking for track machine with the blade and motors at same end, cash waiting.

Is that to go with the radiator for the 60's VW beetle?
They are not made,it is to do with the wear of the track and sprocket. If you look at a dozer the track is driven from the rear and the same principle.
In the civil industry the sprocket is considered the rear of the track.

http://www.heavyequipmentforums.com/forum.php

oceanman · 11-09-2017 05:32PM

hi, I am looking for a very cheap digger to clean up my garden and a few other small jobs over the next few months, old jcb or similar, looks not important as long as its mechanically ok. thanks.

Maggie Marie · 18-12-2017 11:34PM

Cheap 4x4 wanted for farm use. Munster area preferred.

John J. Lyons · 29-12-2017 10:21AM

Maggie Marie wrote: »

Cheap 4x4 wanted for farm use. Munster area preferred.

Hsve s Land rover Freelander, clean jeep,
2L diesel, rear canopy can be opened like pick-up €500

micko38 · 06-01-2018 03:21PM

rear seats for MK1 Pajero

kadman · 03-04-2019 01:26PM

Wanted.

Hydraulic pump for a cherry picker. Its 1997 Iveco 2.8 5Speed gearbox.
Also looking for a manual for the cherry picker. Its a Reachmaster12.5

Thanks

stock> · 03-04-2019 09:03PM

kadman wrote: »

Wanted.

Hydraulic pump for a cherry picker. Its 1997 Iveco 2.8 5Speed gearbox.
Also looking for a manual for the cherry picker. Its a Reachmaster12.5

Thanks

Try Nelson hydraulics or Hipower, you will need to get the numbers off your existing pump for them............................................

kadman · 03-04-2019 09:33PM

stock> wrote: »

Try Nelson hydraulics or Hipower, you will need to get the numbers off your existing pump for them............................................

Thanks, i've just sent an e mail and pics to both companies.

Thanks again.
Tim

148multi · 05-09-2019 02:27PM

Stoning by Robbie 2011 wrote: »

Looking for track machine with the blade and motors at same end, cash waiting.

Why

Wilsongreenlee · 09-12-2020 10:43AM

Hi. Ive an old mini digger which has broken down. Final drive is broken beyond repair. Its such an old machine im finding it difficult to source a drive for it. Again, due to the age i would much prefer a 2nd hand final drive. Could anyone point me in the right direction for a used (or new if need be) final drive for an IHI IS 14 G. Serial number BAS 247?

Thanks

The WANTED Thread

Comments

Welcome!

The **WANTED** Thread

Comments

Welcome!

The WANTED Thread