Today I ordered

Deank · 06-02-2014 09:27PM

I've been eyeing up the iTaste VTR for a while, I finally bought one on Fasttech today along with 2 batteries for €67 and free delivery, the only downside being the 2 plus week wait and the probable tax on top of what I've already paid, will still be worth it though.

Neil_Sedaka · 06-02-2014 09:30PM

Got mine here http://www.vapefreaks.com/Innokin_iTaste_VTR/p2486621_11701904.aspx

I'm loving it! Fantastic bit of kit.

Free delivery on it now too for €74 from Ireland

Deank · 06-02-2014 09:41PM

Neil_Sedaka wrote: »

Got mine here http://www.vapefreaks.com/Innokin_iTaste_VTR/p2486621_11701904.aspx

I'm loving it! Fantastic bit of kit.

Free delivery on it now too for €74 from Ireland

Am looking forward to trying it with with some nice Hawk Sauce or Solar Flare.

Hal1 · 06-02-2014 09:59PM

Bremisis on the way from fast tech

.

M00lers · 06-02-2014 10:06PM

VTR is 70 euro after discount on Vaperus.ie. I can understand grabbing a Nemesis clone or RDAs etc but a VTR is crazy. Customs and an An Post charge make it not worth bothering with IMO.

Deank · 06-02-2014 10:10PM

moolers2000 wrote: »

VTR is 70 euro after discount on Vaperus.ie. I can understand grabbing a Nemesis clone or RDAs etc but a VTR is crazy. Customs and an An Post charge make it not worth bothering with IMO.

The batts I ordered with it are included in the price and they were $15 they'd cost about €20 here, if I get nabbed by customs it'll cost me no more or less than ordering locally.

M00lers · 06-02-2014 10:17PM

Im not convinced dude. Hope it works out but there's no way I'd do it just to save a few quid.

EGriff · 06-02-2014 11:03PM

Have fasttech gotten over their problem shipping batteries?

Deank · 06-02-2014 11:13PM

EGriff wrote: »

Have fasttech gotten over their problem shipping batteries?

Yup. They had a varied choice of shipping options, some wouldn't ship batteries, there were 3 that did, one was a free shipping option, DHL option was $42, extortion.

MonstaMash · 07-02-2014 01:14AM

Neil_Sedaka wrote: »

Got mine here http://www.vapefreaks.com/Innokin_iTaste_VTR/p2486621_11701904.aspx

I'm loving it! Fantastic bit of kit.

Free delivery on it now too for €74 from Ireland

I don't know

It has a great rep as a good piece of kit

But...I just can't get my head around the aesthetics of it, I'm so shallow

Reminds me of fookn breathalyser :pac:

"Would you mind blowing into this please sir?" :eek:

Mr. Chrome · 07-02-2014 01:20AM

Its pretty cool with the ring cut off so it takes any size atty.

Neil_Sedaka · 07-02-2014 01:22AM

MonstaMash wrote: »

Reminds me of fookn breathalyser :pac:

"Would you mind blowing into this please sir?" :eek:

LOL

Fratton Fred · 07-02-2014 08:29AM

I've bitten the bullet and ordered a Kayfun clone from fasttech.

I wanted the Russian, but they were all in long lead times, so opted for the sandblasted lite. This is more an experiment to see how I get on with these before buying the real deal.

The Nemesis is next on my shopping list.

DirtyBollox · 07-02-2014 09:16AM

Just ordered the Tesla mod from ezsmoke, a 900mah ego for backup, new protank and some syringes for diy from Vaperus and some protank heads and some Kamikaze from e-smokeireland.

Happy out.

eirewhite · 07-02-2014 10:34AM

From fastteech

2 18350s
2 18500s
1 kick module
1 30ml bottle liqua bright tobacco 18mg
1 10ml bottle hangsen butterscotch 16mg
1 6pack vase style 510 drip tips
2 meter lengths of nichrome wire 33gauge
1 launcher v2 telecopic mech mod
1 fatty v3 rebuildable atty

Im taking the plummet into the world of mechs, dripping and rebuildables.

I broke the order up into seperate 25euro or less orders.

How am i doing with this order. Did i miss anything? Rda's and mechs are all new to me

Green Hornet · 07-02-2014 10:52AM

Wick?

eirewhite · 07-02-2014 11:00AM

Green Hornet wrote: »

Wick?

I was planning on using cotton ive got loads in the house. I was told its best for flavour?

Green Hornet · 07-02-2014 02:56PM

Yeah, cotton works well. Just remember that you don't need a whole lot. Best to make your coil up using a screwdriver shaft or something as a support and then feed cotton through. Trial and error though if you're starting out.

Chris Dolmeth · 07-02-2014 03:35PM

Ordered a Nemesis clone and a Russian 91% clone from FT.

Should have 'em by Easter lol.

Gryzor · 07-02-2014 04:12PM

Chris Dolmeth wrote: »

Ordered a Nemesis clone and a Russian 91% clone from FT.

Should have 'em by Easter lol.

Waiting on a Russian myself. You won't be disappointed with the Nemesis clone, great piece of kit..

eirewhite · 08-02-2014 12:45PM

Green Hornet wrote: »

Yeah, cotton works well. Just remember that you don't need a whole lot. Best to make your coil up using a screwdriver shaft or something as a support and then feed cotton through. Trial and error though if you're starting out.

yea ive been watching videos of grim green doing it this way. how many wraps would i need to do with that 33 nichrome for a 1.5ish coil or in around there. want to play safe and just enjoy dripping for a while before i start going into sub ohm madness

grindle · 08-02-2014 03:29PM

eirewhite wrote: »

yea ive been watching videos of grim green doing it this way. how many wraps would i need to do with that 33 nichrome for a 1.5ish coil or in around there. want to play safe and just enjoy dripping for a while before i start going into sub ohm madness

You need to know the width of whatever you're coiling around to know how many wraps.
Not many though, 0.18mm Nichrome is quite thin.

eirewhite · 09-02-2014 03:22PM

grindle wrote: »

You need to know the width of whatever you're coiling around to know how many wraps.
Not many though, 0.18mm Nichrome is quite thin.

Ah yea that makes sense. I think it said it was 0.46 ohms per cm

grindle · 09-02-2014 03:53PM

eirewhite wrote: »

Ah yea that makes sense. I think it said it was 0.46 ohms per cm

That's how people should be trying to get resistance -> length.

1.5ohm = 3.26cm length of that wire. Add a few mm on each side for the legs.

Maybe 4/5 wraps around a 2mm diameter screwdriver?

eirewhite · 09-02-2014 05:56PM

grindle wrote: »

That's how people should be trying to get resistance -> length.

1.5ohm = 3.26cm length of that wire. Add a few mm on each side for the legs.

Maybe 4/5 wraps around a 2mm diameter screwdriver?

Cool. Yea that sounds grand so. Waiting on my fatty clone to arrive and as it my first rda, trying to suss out as much as possible before it gets here.

dball · 09-02-2014 07:53PM

grindle wrote: »

That's how people should be trying to get resistance -> length.

1.5ohm = 3.26cm length of that wire. Add a few mm on each side for the legs.

Maybe 4/5 wraps around a 2mm diameter screwdriver?

Grindle, Have you a link to a chart for the diff lengths of different wires etc?

Ionised · 09-02-2014 08:27PM

dball wrote: »

Grindle, Have you a link to a chart for the diff lengths of different wires etc?

https://docs.google.com/spreadsheet/ccc?key=0AgApP0yL41EzdHFOa0FybG43U3c2WG5ERmc3RWJmYWc#gid=5

http://www.tasteyourjuice.com/wordpress/2013/06/17/resistance-wire-calculator/

Eoin · 12-02-2014 01:03PM

Had 3 dud XL carts in a row so want to try something new:

Innokin iClear-30-S
HS USA Mix 100ml -
Cone for Vivi or similar Tank
Smok EMAX VV/VW 1300mah

Eoin · 13-02-2014 01:04PM

Well, that was a waste of money. Great vapour from the battery & tank, but a pretty regular burnt taste.

eirewhite · 13-02-2014 01:37PM

Bounty hunter, buds blend and banofee from e smoke ireland. Along with an 18350 so i can get me svd into stealth mode :-D a couple of iclear 16s, a vivi nova, and a 306 bridgeless for taste testing.

On first impressions the vivi nova and i clear 16s work well, good flavour and vapor, wick well and work perfect. Time will tell if anything leaks.

The 306 is my first dripper. Have just discovered i need a 306 drip tip tho.

As for the juice- the moms and pops buds blend i have to steep for a day or two.

The banoffee is delicious, real bananna taste, not artificial at all, just enough toffee so it doesnt make it over bearing. Really like it. Flavour very good, th good. Not too strong. Its a 20mg juice but hits like between 16 and 18

The bounty hunter - again a great flavour. The wingnuts juice is very impressive. I would say that the flavour and th is the same as the other.
One thing though, this one i could only vape for an evening or so, its a bit much, the coconut is very strong

Today I ordered

Comments