Farming Chit Chat III

sea12 · 01-01-2014 10:18PM

Conmaicne Mara wrote: »

Either the missus cut his internet cable or he's being reincarnated.

Probably both. He must have lived on the god phone. He will be back though. Will find it hard not to be involved.

Conmaicne Mara · 01-01-2014 10:29PM

SS MkII watch has officially commenced so.

delaval · 01-01-2014 10:29PM

biddy2013 wrote: »

suitable for us so:D

Pump 200
Service kit 100€

darragh_haven · 01-01-2014 11:29PM

bob charles wrote: »

He was a mole, and when I joined all the dots I confronted him about it. Once his cover was blown he had no better to do.

Tinker tailor/soldier spy is it. I know sharpshooter was the soldier. Bob, are you the tinker or the spy. (Don't take you for a tailor)

flat out !! · 01-01-2014 11:49PM

Way to do it....
https://www.facebook.com/photo.php?v=590520141003566

Conmaicne Mara · 01-01-2014 11:56PM

flat out !! wrote: »

Way to do it....
https://www.facebook.com/photo.php?v=590520141003566

Know nothing about diggers, are the legs supposed to be used that way, am thinking not

Nekarsulm · 02-01-2014 12:06AM

Conmaicne Mara wrote: »

Know nothing about diggers, are the legs supposed to be used that way, am thinking not

All good till a pipe bursts.

Reggie. · 02-01-2014 12:27AM

Nekarsulm wrote: »

All good till a pipe bursts.

dont think they think like that in developing countries

Farmer Pudsey · 02-01-2014 01:18AM

moy83 wrote: »

If I ever close my account , I'd say it will be because the missus giving out about all the time I spend on the internet .

When I close my account I will either be bored with this discussion or be sucking daisy's from the wrong end.

Goodnight and a belated Happy & Prosperous New year to yee all.

Last year I was told that every New year the good fairy tap on the shoulder on the New Years Eve of all those that will prosper the following year. I hope that he walloped sh!t out of yee last night.:D

PS I think my own is bollaxed he must have used either a hurley or baseball bat

biddy2013 · 02-01-2014 08:58AM

first calf of the new year, a dead fr bull, coming head first, cow wasnt due for a few weeks

dzer2 · 02-01-2014 10:14AM

biddy2013 wrote: »

first calf of the new year, a dead fr bull, coming head first, cow wasnt due for a few weeks

Tough that Biddy

delaval · 02-01-2014 12:28PM

biddy2013 wrote: »

first calf of the new year, a dead fr bull, coming head first, cow wasnt due for a few weeks

That's it for the year, we all have a few starting off. Onward and upward

If the cow is ok that calf will probably be the most profitable of the year!!

moy83 · 02-01-2014 12:41PM

I just spent an hour sledging out a pin out of a loader . Does anyone know if the matbro 3 ( I think ) have a bearing or bushin on the top pin for rolling out the bucket ? There was alot of play in it but the pin is not worn much at all and the ould lad reckons it might be a bearing that was in it originally

jersey101 · 02-01-2014 12:45PM

delaval wrote: »

That's it for the year, we all have a few starting off. Onward and upward

If the cow is ok that calf will probably be the most profitable of the year!!

I've about 5 here getting big bags already and there not due for another 3 weeks

freedominacup · 02-01-2014 12:46PM

moy83 wrote: »

I just spent an hour sledging out a pin out of a loader . Does anyone know if the matbro 3 ( I think ) have a bearing or bushin on the top pin for rolling out the bucket ? There was alot of play in it but the pin is not worn much at all and the ould lad reckons it might be a bearing that was in it originally

Is there much of a difference between the bore of pin and the mounting. A bearing would be unlikely but a bushing would be quite possible. Try this crowd if you need a bushin made off size. They import and refurb track machines and teleporters all the time and are well used to "making up ground" IYKWIM.

http://ferrybridge.ie/

moy83 · 02-01-2014 01:07PM

freedominacup wrote: »

Is there much of a difference between the bore of pin and the mounting. A bearing would be unlikely but a bushing would be quite possible. Try this crowd if you need a bushin made off size. They import and refurb track machines and teleporters all the time and are well used to "making up ground" IYKWIM.

http://ferrybridge.ie/

Thanks freedom , I'd say there could be 30mm difference . I dont know why he thinks there was a bearing in it but either way its more than likely going to get a bushing now any how .
Ill probably get a local lad to make it up

freedominacup · 02-01-2014 01:14PM

moy83 wrote: »

Thanks freedom , I'd say there could be 30mm difference . I dont know why he thinks there was a bearing in it but either way its more than likely going to get a bushing now any how .
Ill probably get a local lad to make it up

You might be as well to let him install it too for the extra few quid.

dzer2 · 02-01-2014 01:22PM

moy83 wrote: »

Thanks freedom , I'd say there could be 30mm difference . I dont know why he thinks there was a bearing in it but either way its more than likely going to get a bushing now any how .
Ill probably get a local lad to make it up

A long ball bearing could fit in there just measure the shaft and bore then check against book for size.

Reggie. · 02-01-2014 01:27PM

bushing might be a better job as it surly would last longer than a bearing

randomperson12 · 02-01-2014 01:31PM

this isnt really a chit chat page

moy83 · 02-01-2014 01:33PM

freedominacup wrote: »

You might be as well to let him install it too for the extra few quid.

Will you stop ! The old lad will go to get it made and stand over the poor bastard making it , then let the fun begin at home fitting it . He bought it before christmas without a bucket or forks , then he bought a bucket from a loading shovel with teeth and has spent the christmas making brackets for the pin and cone head and cutting off the teeth and putting a clean edge on it .
I told him the tilt is too slow for buckraking so thats why he is tightening up the brackets . Its still not going to be used !
Any wonder I dont like machinery much

Reggie. · 02-01-2014 01:35PM

moy83 wrote: »

Will you stop ! The old lad will go to get it made and stand over the poor bastard making it , then let the fun begin at home fitting it . He bought it before christmas without a bucket or forks , then he bought a bucket from a loading shovel with teeth and has spent the christmas making brackets for the pin and cone head and cutting off the teeth and putting a clean edge on it .
I told him the tilt is too slow for buckraking so thats why he is tightening up the brackets . Its still not going to be used !
Any wonder I dont like machinery much

know plenty of lads just like that

moy83 · 02-01-2014 01:36PM

randomperson12 wrote: »

this isnt really a chit chat page

Did you see the soccer last night ? Tis great weather for this time of the year . Have you the turkey finished ?
Is that better ?

jersey101 · 02-01-2014 02:10PM

http://youtu.be/aQBuuOLlgIA
What a legend

delaval · 02-01-2014 02:14PM

jersey101 wrote: »

http://youtu.be/aQBuuOLlgIA
What a legend

Is that the bosman??

hugo29 · 02-01-2014 02:25PM

randomperson12 wrote: »

this isnt really a chit chat page

very true, its only had around 27,000 posts,

vibe666 · 02-01-2014 02:32PM

randomperson12 wrote: »

this isnt really a chit chat page

and you're not really the 12th random person are you?

biddy2013 · 02-01-2014 03:22PM

randomperson12 wrote: »

this isnt really a chit chat page

IT IS A "FARMING CHIT CHAT " THREAD, there are no rules on what is posted in it, It saves alot of people starting up threads asking questions, what do you think is the problem with it?

jersey101 · 02-01-2014 04:04PM

The ifj is a good read this week.

Strathroy in talks with WMP. could be an interesting year milk wise......

exercise is the antidote · 02-01-2014 04:09PM

just got off the phone to one ignorant f'''k of a man.. how can you expect to sell animals if you are not prepared to answer a few questions on the phone.. I was actually interested in them.. he can go runn and jump now..ha

Farming Chit Chat III

Comments