Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.
Hi all, please see this major site announcement: https://www.boards.ie/discussion/2058427594/boards-ie-2026

Number 29 Error On Sky Plus Box

  • 29-09-2011 04:59PM
    #1
    Closed Accounts Posts: 422 ✭✭


    Right folks any help with this would be appreciated. My daughter turned on her sky plus box last night and got the message 'no satellite signal been received' with 29 on the screen.

    I had a look and discovered the connecter going to number 1 was broken. I swapped the cable from number 2 to number 1 so she could watch TV.

    Today I got a new connecter but when I connect that cable to number 1 the 'no satellite signal been received' and the 29 are still on the screen.

    I hope I've explained this properly and I hope someone may have a solution.


Comments

  • Registered Users, Registered Users 2 Posts: 747 ✭✭✭mafiaboy


    Right folks any help with this would be appreciated. My daughter turned on her sky plus box last night and got the message 'no satellite signal been received' with 29 on the screen.

    I had a look and discovered the connecter going to number 1 was broken. I swapped the cable from number 2 to number 1 so she could watch TV.

    Today I got a new connecter but when I connect that cable to number 1 the 'no satellite signal been received' and the 29 are still on the screen.

    I hope I've explained this properly and I hope someone may have a solution.
    I'm in the same boat but I unplugged mine as I was moving the tv and when I plugged it back in it's now saying no signal been received and there is a 29 error showing up + iv cheeked every cable and all is connected up right but still no joy even cheeked the dish outside ???


  • Registered Users, Registered Users 2 Posts: 33,709 ✭✭✭✭Cantona's Collars


    Error 29 is a no-signal error message,check the cable where you plugged it out from the box,it may have become loose in the f-connector or if you pulled it out you could have the outer strands of cable coming into contact with the main central copper wire which will cause signal loss.

    Sometimes doing a reboot of the box can help.


  • Registered Users, Registered Users 2 Posts: 747 ✭✭✭mafiaboy


    zerks wrote: »
    Error 29 is a no-signal error message,check the cable where you plugged it out from the box,it may have become loose in the f-connector or if you pulled it out you could have the outer strands of cable coming into contact with the main central copper wire which will cause signal loss.

    Sometimes doing a reboot of the box can help.
    By rebooting you mean unplug from the mains for 15min and then plug it back in, yeah done that still no joy


  • Registered Users, Registered Users 2 Posts: 33,709 ✭✭✭✭Cantona's Collars


    mafiaboy wrote: »
    By rebooting you mean unplug from the mains for 15min and then plug it back in, yeah done that still no joy

    Check cables the way I described in my previous post,the slightest thing could cause a problem especially if it was working before you took the cables out.

    http://www.satcure.com/tech/fconn.htm

    plugF03.jpg


  • Closed Accounts Posts: 422 ✭✭qhe0i9zvfgdou8


    I've checked the connections several times with no joy. I've also turned the power to the LNB on and off but nothing works. Looks like she will have to book a service call.


  • Advertisement
Advertisement
Advertisement