Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Quoted €400 for discs and brakes on BWM 320D

  • 28-02-2009 10:35am
    #1
    Registered Users, Registered Users 2 Posts: 9,559 ✭✭✭


    I got a quote of €400 to replace the discs and brake pads (x4) on my E46 320D by a local garage.

    Rip, or not?


«1

Comments

  • Closed Accounts Posts: 7,563 ✭✭✭leeroybrown


    That doesn't sound too bad. Assuming they're the correct BMW parts they're likely to cost a very large chunk of that price.


  • Registered Users, Registered Users 2 Posts: 7,748 ✭✭✭Bluefoam


    you can get the parts for about €120 - then bring them to a local mechanic...

    http://www.buypartsby.co.uk/


  • Registered Users, Registered Users 2 Posts: 10,511 ✭✭✭✭guil


    Bluefoam wrote: »
    you can get the parts for about €120 - then bring them to a local mechanic...

    http://www.buypartsby.co.uk/
    check again, the discs alone would be more than that, it says they are priced individually but sold in pairs


  • Moderators, Politics Moderators Posts: 40,774 Mod ✭✭✭✭Seth Brundle


    GSF will privode OEM quality brakes at a fraction of the BMW cost. However, I's say that the quote provided to the OP was for non BMW sourced parts and the balance is made up of labour.
    Seems reasonable enough tbh!


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    That is a complete rip off.

    You can buy the parts (Pads and discs) on Ebay for £100 (incl 20 p+p) quid stg from a genuine part company.

    A mechanic would charge €50-80 to change them. it is not a big job.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 3,282 ✭✭✭Bandara


    That is a complete rip off.

    You can buy the parts (Pads and discs) on Ebay for £100 (incl 20 p+p) quid stg from a genuine part company.

    A mechanic would charge €50-80 to change them. it is not a big job.


    No company in this country could survive if they charged €50 to change the pads and discs on a car. And they will stand over the job afterwards.

    Have you any idea how much wages, insurance, rent, equipment etc cost?

    Sorry, but you need to get real here.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Hammertime wrote: »
    No company in this country could survive if they charged €50 to change the pads and discs on a car. And they will stand over the job afterwards.

    I said €50-80 which is 2 hours labour in 2 different garages, I just had mine done and paid 50, the job took 1hr 15 mins in total.
    Hammertime wrote: »
    Have you any idea how much wages, insurance, rent, equipment etc cost?

    Yes to all. Thats why 40 per hour labour at max is a fair price, do not forget that the majority of garages would be getting a kickback of 25% on parts.
    Hammertime wrote: »
    Sorry, but you need to get real here.

    €25 to €40 per hour labour is a fair price.

    Escpecially when the job only took 1 and 1/4 hours to do.

    Is this not real?


  • Registered Users, Registered Users 2 Posts: 3,282 ✭✭✭Bandara


    I said €50-80 which is 2 hours labour in 2 different garages, I just had mine done and paid 50, the job took 1hr 15 mins in total.



    Yes to all. Thats why 40 per hour labour at max is a fair price, do not forget that the majority of garages would be getting a kickback of 25% on parts.



    €25 to €40 per hour labour is a fair price.

    Escpecially when the job only took 1 and 1/4 hours to do.

    Is this not real?

    ducati do a excerise for me ...

    1. Take 13.5% away from the €25 an hour figure you think is fair.

    Write down the hourly wage rate for a mechanic, then add 18.5% to it, then write down a % figure that you think goes towards covering each of the following rent, electricity, insurance, rates, equipment, miscellanous etc etc.

    Now take that total percentage figure away from the figure you got after point 1

    What are you left with?

    A minus figure?


  • Registered Users, Registered Users 2 Posts: 9,248 ✭✭✭Plug


    Another rip off garage thread, can we just drop it lads?:rolleyes:


  • Registered Users, Registered Users 2 Posts: 22,815 ✭✭✭✭Anan1


    Plug wrote: »
    Another rip off garage thread, can we just drop it lads?:rolleyes:
    This is the motors board, people have a right to discuss the cost of work.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 937 ✭✭✭Mr.Diagnostic


    That is a complete rip off.

    You can buy the parts (Pads and discs) on Ebay for £100 (incl 20 p+p) quid stg from a genuine part company.

    A mechanic would charge €50-80 to change them. it is not a big job.


    €25 to €40 per hour labour is a fair price.


    Absolutely agree, parts are easily available for €120 so no need to buy for any higher price. Brakes are brakes, all the same quality and sure not that important at all.

    As regards labour, any grease monkey will fit these in 20 minutes. There is no need to look at the rest of the braking system, sure wouldn’t you know if there was a problem with the rest of it anyway. Besides, if another part of the system fails soon after the garages insurance will cover it and there is very little chance that someone could get killed. Its not worth doing right at all.
    €25 an hour! No way is that justified. Sure what overheads has a garage got that they need to charge such outrageous prices. Anyone would think they have to pay for tools, diagnostic equipment, insurance, rent, software updates, light, heat, Vat etc.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    I do not see why we have to drop this.

    The OP asked a question.

    The answer to that question is €200 is a fair price for new pads and disks all round.

    Thats €90 labour for 1 1/4 hrs work, and €110 for the OEM parts.

    This is a very fair price to pay.

    The garage is ripping him off by €200.


  • Registered Users, Registered Users 2 Posts: 38,247 ✭✭✭✭Guy:Incognito


    I do not see why we have to drop this.

    The OP asked a question.

    The answer to that question is €200 is a fair price for new pads and disks all round.

    Thats €90 labour for 1 1/4 hrs work, and €110 for the OEM parts.

    This is a very fair price to pay.

    The garage is ripping him off by €200.

    Theres nothing stopping you posting links to the parts BTW.

    The cheapest discs GSF have are stg£28.60 +vat. For comparison. Thats near €160 there anyway, more depending on exchange rate fluctuations.

    B60124 BRAKE DISC-VENTED E46 (320D 1998>09/2001) 28.60


    Pads are stg£37.30 plus vat. so thats another €90 anyway.

    B64029 BRAKE PAD SET-TEXTAR E46 330d 37.30


  • Registered Users, Registered Users 2 Posts: 3,282 ✭✭✭Bandara


    I do not see why we have to drop this.

    The OP asked a question.

    The answer to that question is €200 is a fair price for new pads and disks all round.

    Thats €90 labour for 1 1/4 hrs work, and €110 for the OEM parts.

    This is a very fair price to pay.

    The garage is ripping him off by €200.

    EITHER DO I, SO GO ON ANSWER MY QUESTION....


    ducati do a excerise for me ...

    1. Take 13.5% away from the €25 an hour figure you think is fair.

    Write down the hourly wage rate for a mechanic, then add 18.5% to it, then write down a % figure that you think goes towards covering each of the following rent, electricity, insurance, rates, equipment, miscellanous etc etc.

    Now take that total percentage figure away from the figure you got after point 1

    What are you left with?

    A minus figure?


  • Registered Users, Registered Users 2 Posts: 22,815 ✭✭✭✭Anan1


    €400 for four discs & pads fitted doesn't sound particularly over-the-top to me, TBH.


  • Registered Users, Registered Users 2 Posts: 10,511 ✭✭✭✭guil


    I do not see why we have to drop this.

    The OP asked a question.

    The answer to that question is €200 is a fair price for new pads and disks all round.

    Thats €90 labour for 1 1/4 hrs work, and €110 for the OEM parts.

    This is a very fair price to pay.

    The garage is ripping him off by €200.
    i'd love to know where ya get ur prices from


  • Registered Users, Registered Users 2 Posts: 38,247 ✭✭✭✭Guy:Incognito


    Hammertime wrote: »
    EITHER DO I, SO GO ON ANSWER MY QUESTION....


    ducati do a excerise for me ...

    1. Take 13.5% away from the €25 an hour figure you think is fair.

    Write down the hourly wage rate for a mechanic, then add 18.5% to it, then write down a % figure that you think goes towards covering each of the following rent, electricity, insurance, rates, equipment, miscellanous etc etc.

    Now take that total percentage figure away from the figure you got after point 1

    What are you left with?

    A minus figure?

    I wouldnt take a lack of specific answers personnally. I seem to remember on the parts thread a couple of weeks back, inconcenient questions got "forgotten" in the confusion of the thread in favour of the ones that certain people felt like answering.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    I got a quote of €400 to replace the discs and brake pads (x4) on my E46 320D by a local garage.

    Rip, or not?

    Can you get a quote from the garage and breakdown the charges for us.

    I would love to know what they are charging for the parts.

    How many hours labour are they asking for?


  • Closed Accounts Posts: 2,376 ✭✭✭54kroc


    I do not see why we have to drop this.

    The OP asked a question.

    The answer to that question is €200 is a fair price for new pads and disks all round.

    Thats €90 labour for 1 1/4 hrs work, and €110 for the OEM parts.

    This is a very fair price to pay.

    The garage is ripping him off by €200.

    That sounds about right to me although if your any way handy at all
    you should give it a go yourself, it's fairly easy and a very satisfying job to do.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Hammertime wrote: »
    ducati do a excerise for me ...

    1. Take 13.5% away from the €25 an hour figure you think is fair.

    Write down the hourly wage rate for a mechanic, then add 18.5% to it, then write down a % figure that you think goes towards covering each of the following rent, electricity, insurance, rates, equipment, miscellanous etc etc.

    Now take that total percentage figure away from the figure you got after point 1

    What are you left with?

    A minus figure?

    What should the labour charge be then?


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 4,406 ✭✭✭PirateShampoo


    cork45 wrote: »
    That sounds about right to me although if your any way handy at all
    you should give it a go yourself, it's fairly easy and a very satisfying job to do.


    I would never touch my brakes myself. I always go to a garage and let some one whos 100% who knows what they are doing.

    400 sounds about right.

    I bought 4 serated disks and mintex pads all round for my car off ebay for same price.


  • Registered Users, Registered Users 2 Posts: 5,399 ✭✭✭DublinDilbert


    I got a quote of €400 to replace the discs and brake pads (x4) on my E46 320D by a local garage.

    Rip, or not?

    Are you having all 4 discs replaced? or Just the front discs, but having all 4 brake pads replaced?? Its not clear form the post above....

    Are they replacing the brake wear sensors? Probably best to replace them, they are about €5 from GSF. The cable goes on these, and you end up with a warning light on the dash, which is a pain.

    The rear discs shouldn't need to be replaced, they only do 25% of the work! In saying that they might be in bad condition, who knows.....


    Conservative prices including VAT would be:-
    Front Pads €25
    Rear Pads €20
    Brake wear sensors €5 x 2
    Front discs €85
    Rear discs €70

    Total: €210

    Then labour wise, the others here would be better able to advise, but if your doing the rear shoes the hand brake will have to be adjusted + tested... .I'd say 1.5 hours....... Say @ €60/hour, would be €90 + VAT = €110

    I presume a BMW dealer would charge something like €110/hour, which would be €220+VAT = €260 (aprox).


  • Registered Users, Registered Users 2 Posts: 1,346 ✭✭✭darealtulip


    I would never touch my brakes myself. I always go to a garage and let some one whos 100% who knows what they are doing.

    400 sounds about right.

    I bought 4 serated disks and mintex pads all round for my car off ebay for same price.

    brakes are really easy to do yourself, it was one of the first things I did myself and it is not rocket sience. You can get really cheap stuff from GSF carparts


  • Registered Users, Registered Users 2 Posts: 1,081 ✭✭✭su_dios


    I find it worrying to see that people are trying to spend the least amount possible on their brakes!

    Sure you don't want to be ripped off but if you're paying 25eur an hour for labour at a 1hr 15min job you cannot be expecting much.


  • Registered Users, Registered Users 2 Posts: 3,282 ✭✭✭Bandara


    What should the labour charge be then?

    I have no experience of garages, I do however have a lot of experience in employing people, you seem to know exactly how much a garage should charge, yet you are unable to back it up with anything.

    Just to enlighten you. I'll assume a mechanic earns 15 an hour (I doubt I'm too far off but I'm open to be corrected).

    So that mechanic at €15 an hour costs an additional €1.57 an hour in Employer PRSI contributions, you must then factor an additional 8% cost an hour in holiday pay- which is another €1.20.

    So your basic mechanic is costing €17.77 an hour to employ. So that leaves us with €7.23 an hour from which to pay for rent, electricity, insurance, equipment, training, rates etc etc etc etc.

    And then in order to stay in buisness and pay their bills the company has to turn a profit.

    Seeing as rent would normally run at about 6%, electricity about 1.5%, rates average about 1% etc etc etc I would roughly estimate that a garage charging €25 an hour would be making a rather large loss per hour working at what you suggest.

    Unless of course you know a lot more than you seem too and care to enlighten us?


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Hammertime wrote: »
    I have no experience of garages, I do however have a lot of experience in employing people, you seem to know exactly how much a garage should charge, yet you are unable to back it up with anything.

    Just to enlighten you. I'll assume a mechanic earns 15 an hour (I doubt I'm too far off but I'm open to be corrected).

    So that mechanic at €15 an hour costs an additional €1.57 an hour in Employer PRSI contributions, you must then factor an additional 8% cost an hour in holiday pay- which is another €1.20.

    So your basic mechanic is costing €17.77 an hour to employ. So that leaves us with €7.23 an hour from which to pay for rent, electricity, insurance, equipment, training, rates etc etc etc etc.

    And then in order to stay in buisness and pay their bills the company has to turn a profit.

    Seeing as rent would normally run at about 6%, electricity about 1.5%, rates average about 1% etc etc etc I would roughly estimate that a garage charging €25 an hour would be making a rather large loss per hour working at what you suggest.

    Unless of course you know a lot more than you seem too and care to enlighten us?

    You did not answer the question!


  • Closed Accounts Posts: 12,401 ✭✭✭✭Anti


    . Brakes are brakes, all the same quality and sure not that important at all.


    Sorry, but the brakes are probably the most important part of the car in all fairness. I'd personally much rather pay 400€ to a BMW garage to fit the discs and pads, than buy them on ebay and have some backstreet mechanic who is probbly only there as he failed his JC and LC.


  • Registered Users, Registered Users 2 Posts: 10,511 ✭✭✭✭guil


    Anti wrote: »
    Sorry, but the brakes are probably the most important part of the car in all fairness. I'd personally much rather pay 400€ to a BMW garage to fit the discs and pads, than buy them on ebay and have some backstreet mechanic who is probbly only there as he failed his JC and LC.
    i think ya missed the sarcasm anti


  • Registered Users, Registered Users 2 Posts: 3,282 ✭✭✭Bandara


    Hammertime wrote: »
    I have no experience of garages, I do however have a lot of experience in employing people, you seem to know exactly how much a garage should charge, yet you are unable to back it up with anything.

    Just to enlighten you. I'll assume a mechanic earns 15 an hour (I doubt I'm too far off but I'm open to be corrected).

    So that mechanic at €15 an hour costs an additional €1.57 an hour in Employer PRSI contributions, you must then factor an additional 8% cost an hour in holiday pay- which is another €1.20.

    So your basic mechanic is costing €17.77 an hour to employ. So that leaves us with €7.23 an hour from which to pay for rent, electricity, insurance, equipment, training, rates etc etc etc etc.

    And then in order to stay in buisness and pay their bills the company has to turn a profit.

    Seeing as rent would normally run at about 6%, electricity about 1.5%, rates average about 1% etc etc etc I would roughly estimate that a garage charging €25 an hour would be making a rather large loss per hour working at what you suggest.

    Unless of course you know a lot more than you seem too and care to enlighten us?

    Oh the irony, not to quick on the answers yourself....


  • Advertisement
  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Anti wrote: »
    Sorry, but the brakes are probably the most important part of the car in all fairness. I'd personally much rather pay 400€ to a BMW garage to fit the discs and pads, than buy them on ebay and have some backstreet mechanic who is probbly only there as he failed his JC and LC.

    What is wrong with you all.

    I can get full set of Mintex pads and discs for 100stg. These are excellent quality and come from the exact same source that the Irish garages will use.

    Even if I go to dealership and pay 60 euro per hour it is still cheaper.

    Many garages charge 25-40 per hour labour and they make extra 25% clear profit on souring parts.

    Ten years ago €20 labour per hour would have been laughed at.

    This is one of the reasons we have priced our country out of competitiveness.


  • Registered Users, Registered Users 2 Posts: 338 ✭✭DM-BM


    Anti wrote: »
    Sorry, but the brakes are probably the most important part of the car in all fairness. I'd personally much rather pay 400€ to a BMW garage to fit the discs and pads, than buy them on ebay and have some backstreet mechanic who is probbly only there as he failed his JC and LC.


    This has do be one of the most ignorant posts i've read here.

    If you think that the cost of labour equates to the quality of labour your deluded.

    I have worked in the motor trade and some of the stuff that goes on in dealerships would surprise a lot of people as would the ignorance and apathy of a lot of the staff in there.

    And as for the back street machanic comment, what makes you say that, do you think you need 600 points to become an apprentice in a BMW garage.


  • Registered Users, Registered Users 2 Posts: 4,406 ✭✭✭PirateShampoo


    Hammertime wrote: »
    Oh the irony, not to quick on the answers yourself....


    Did you just flame your self?


  • Registered Users, Registered Users 2 Posts: 38,247 ✭✭✭✭Guy:Incognito


    I can get full set of Mintex pads and discs for 100stg..

    Again with the selective reading of posts.

    Link?


  • Registered Users, Registered Users 2 Posts: 1,608 ✭✭✭Victor_M


    Did you just flame your self?

    I was thinking the same myself.
    Hammertime, I hope you didn't flame yourself with your own quote earlier, cos you are putting forward a very good argument otherwise.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    DM-BM wrote: »
    This has do be one of the most ignorant posts i've read here.

    If you think that the cost of labour equates to the quality of labour your deluded.

    I have worked in the motor trade and some of the stuff that goes on in dealerships would surprise a lot of people as would the ignorance and apathy of a lot of the staff in there.

    Well said

    from personal experience as a mechanic most dealerships will be pawing the work off on some poor apprentice, who is only as good as the people who are training him.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 38,247 ✭✭✭✭Guy:Incognito


    Well said

    from personal experience as a mechanic most dealerships will be pawing the work off on some poor apprentice, who is only as good as the people who are training him.

    If your not goign to back up your price claims would you not at least say so?


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Stekelly wrote: »
    If your not goign to back up your price claims would you not at least say so?

    FFS


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Stekelly wrote: »
    If your not goign to back up your price claims would you not at least say so?

    Any F*ckin moron who uses forums should be able to use ebay and check for themselves, I bought my parts already, I know the price I paid, read the f*ckin post by another who quotes the price and site he used.:mad::mad::mad::mad:


  • Registered Users, Registered Users 2 Posts: 38,247 ✭✭✭✭Guy:Incognito


    Any F*ckin moron who uses forums should be able to use ebay and check for themselves, I bought my parts already, I know the price I paid, read the f*ckin post by another who quotes the price and site he used.:mad::mad::mad::mad:

    So thats a no then?



    If you've already bought them then it's even easier, you dotn even have to go looking.


  • Subscribers Posts: 16,602 ✭✭✭✭copacetic


    Any F*ckin moron who uses forums should be able to use ebay and check for themselves, I bought my parts already, I know the price I paid, read the f*ckin post by another who quotes the price and site he used.:mad::mad::mad::mad:

    well if so, even you should be able to manage it? making laughable claims, not backing them up then throwing a hissy fit isn't normally the sign of anyone who knows what they are talking about.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 3,651 ✭✭✭Captain Slow IRL


    from personal experience as a mechanic most dealerships will be pawing the work off on some poor apprentice, who is only as good as the people who are training him.

    So if the apprentice is working under the supervision of the master technician, he's as good?!

    @ OP - if it's a reputable garage and the cost covers labour along with putting new pads and discs on each wheel it's pretty good. The bmw's have a set of shoes for the handbrake so check if these will be replaced as well - if the discs are being replaced, you're as well to have these renewed as well.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Stekelly wrote: »
    So thats a no then?



    If you've already bought them then it's even easier, you dotn even have to go looking.

    I have read a lot of your posts and TBH ....

    13,000+ posts, all f*ckin air and pointless +1's.


    The link is in an earlier post in this thread


  • Registered Users, Registered Users 2 Posts: 38,247 ✭✭✭✭Guy:Incognito


    I have read a lot of your posts and TBH ....

    13,000+ posts, all f*ckin air and pointless +1's.


    The link is in an earlier post in this thread

    Still no link?

    We are talking about your claim of a full set of Mintex discs and pads for a 320D for stg£100.


  • Registered Users, Registered Users 2 Posts: 4,406 ✭✭✭PirateShampoo


    Would also like to c the prices.

    When i bought new disks, bradid hoses and mintex extreme pads for a Impreza they cost me roughly 400 euro off ebay.


  • Registered Users, Registered Users 2 Posts: 17,819 ✭✭✭✭peasant


    I have read a lot of your posts and TBH ....

    13,000+ posts, all f*ckin air and pointless +1's.

    What's that got to do with anything?

    Stick to the topic (and post a link to the prices you quote)


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    So if the apprentice is working under the supervision of the master technician, he's as good?!

    I was only making a comment on training.
    The bmw's have a set of shoes for the handbrake so check if these will be replaced as well - if the discs are being replaced, you're as well to have these renewed as well.

    This is a good point, just make sure they show you how to adjust them, because you will need to after a few weeks.

    http://cgi.ebay.co.uk/BMW-320-D-325-328-E46-FRONT-BRAKE-DISCS-MINTEX-PADS_W0QQitemZ370158590106QQihZ024QQcategoryZ10374QQtcZphotoQQcmdZViewItem

    http://cgi.ebay.co.uk/BMW-320-320D-323-E46-REAR-BRAKE-DISCS-MINTEX-PADS-8_W0QQitemZ320321522370QQihZ011QQcategoryZ10374QQtcZphotoQQcmdZViewItem


  • Registered Users, Registered Users 2 Posts: 4,406 ✭✭✭PirateShampoo


    Well u backed it up.

    They seem awfully cheap though.


  • Registered Users, Registered Users 2 Posts: 937 ✭✭✭Mr.Diagnostic


    Anti wrote: »
    Sorry, but the brakes are probably the most important part of the car in all fairness. I'd personally much rather pay 400€ to a BMW garage to fit the discs and pads, than buy them on ebay and have some backstreet mechanic who is probbly only there as he failed his JC and LC.


    I have to say its not often I suffer from subtlety issues :) sorry about that. I was merely attempting to maintain the standard set by loveducati.



    from personal experience as a mechanic

    But you claim to be an accountant too.

    A mechanic might have some idea of the costs to run a business, an accountant should.

    So lets see if I have this right. First you were a mechanic, then you became an accountant and finally you qualified as an internet troll.

    Well done, you have 4 pages out of it so far and I would guess its not over yet.


  • Closed Accounts Posts: 379 ✭✭LoveDucati2


    Well u backed it up.

    They seem awfully cheap though.

    Thanks for the comment, I have the parts so I knew exactly.

    These are exactly the same parts that some dealers are using here.

    When I see a garage charging 400 quid, (150 labour and 250 parts) it drives me insane.

    I know the job in a proper garage with ramp and all the tools should take an hour to 1 1/2 hrs or a little bit more if you have problems.


  • Closed Accounts Posts: 2,376 ✭✭✭54kroc


    nice find i'll be getting a few bit's from that crowd.


  • Advertisement
This discussion has been closed.
Advertisement