Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

DEAP Factor for Thermal Bridging

  • 06-07-2008 10:11pm
    #1
    tipperary
    Registered Users, Registered Users 2 Posts: 447 ✭✭


    Hi all

    Have been going through the DEAP spreadsheet trying out various scenarios for by build. Our house if ICF, one of the benefits of which is improved thermal bridging. Is there any guidance on a suitable value for the 'Factor for Thermal Bridging' for an ICF house?


Comments

  • #2
    Gumbo
    Moderators, Society & Culture Moderators Posts: 39,783 Mod ✭✭✭✭Gumbo


    if its different to the standard 0.17, isint there a formula to follow for each ope, and thermal bridge location iirc


  • #3
    ardara1
    Closed Accounts Posts: 495 ✭✭ardara1


    THe UK Planning portal has 'Accredited Details for Construction' for the following construction types

    Partial Fill Cavity Wall
    Full Fill Cavity Wall
    Internal Insulation system
    External Insulation Systems
    Timber Frame
    Steel Frame

    No ICF I'm afraid - what makes you say ICF is one of the best for Thermal Bridging have you seen any results you can point me to?


  • #4
    tipperary
    Registered Users, Registered Users 2 Posts: 447 ✭✭tipperary


    I'm not aware of any independent testing, but as it is externally insulated I would have thought that the majority of the thermal bridges would be eliminated? Would be open to being proved wrong!


  • #5
    ardara1
    Closed Accounts Posts: 495 ✭✭ardara1


    tipperary wrote: »
    I'm not aware of any independent testing, but as it is externally insulated I would have thought that the majority of the thermal bridges would be eliminated? Would be open to being proved wrong!

    Depends on quantity and placement of insulation alright - but any structure that's built directly onto the floor slab will have difficulty even hitting the 0.16 psi value needed be able to use the Y-value of 0.08 in DEAP - but then again I haven't seen this actual situation tested - but a similar one with a reinforced slab sitting on the inner leaf - VERY difficult to get even a reasonable value.


  • #6
    sas
    Registered Users, Registered Users 2 Posts: 1,282 ✭✭✭sas


    ardara1 wrote: »
    ... but any structure that's built directly onto the floor slab will have difficulty even hitting the 0.16 psi value needed be able to use the Y-value of 0.08 in DEAP

    Can you explain this please ? I have no idea what this means and am interested in ICF.


  • Advertisement
Advertisement