Lidl Parkside 20V 1000M2 robot mower review

The app is not working properly on my mower, this year's model. I can pause and restart but the Go to station and Spot mode buttons don't do anything. Because the pause and restart buttons work in the app I'm assuming that there's no issue with connecting my phone to the mower. Maybe I'm not doing something right somewhere? Thanks.

Can I ask is it worth it? What's the difference between the expensive one and the cheaper one? The expensive one doesn't have Lidar right?

I got a "Motor stall" error on mine and the wifi hasn't been working for a while and Novo, the service company, want me to send it to Germany for repair. Has anyone had to do this?

I need to box it up and bring it to a post office. Base station, charger and all. Some amount of hassle

I have the 1000m² wired version working away since early Spring. I took the front comb off while the grass was long, i did a few cuts with the ride on first, as the grass was just too long, its also about 700m² area. After about a month, the grass is looking great and ive the comb back on. Ive had a few issues, software related where the mower seems to power down or goes offline while at the docking station. A power off on cycle does the trick.

I recently purchased the 1250m² smart vision mower for an area about 1100m². Its certainly a more solid unit with a bit of heft to it. It's quicker and seems to be more powerful at cutting. But im having a few issues with it. It struggles with a messy border, say where grass merges into a ditch or hedge, it was constanly driving into it and getting stuck. As tempory measure ive had to pin down about 100m of hazard tape and its worked perfectly and detecting it. It recognises the transition from grass to driveway/kerbs very well. Another issue I am having is a cutter motor error, where it leaves the base station and after 5 seconds of driving only it stops and displays cutter motor error. Only fix is to remove the battery and power back up and it works away. Sounds software related. Hopefully an update will be pushed out soon to fix this as i dont want to have to send it back.

I got 2 of the 500m2 ones last year. One is no longer turning the blade unit. It drives around fine, but not much use if not cutting the grass. Any ideas before I return it?