Today I did something to my car (volume 2)

Wait what… It's the annual oil change for the S60 already?! In the same location? With the same cars in the background? Better get the only person I can think of to do the job… The king

Having trouble with a bulb holder too but bah, I'll root out a spare holder and plough on. It is a 24 year old car after all

Had a small problem with the power brakes/vacuum servo on the E34, so I altered things a little bit by adding an elec vacuum pump (from some generic non specific VW of some sort) triggered by a vacuum switch when the vacuum drops too low (now take a glass of brandy and port every time you read the word vacuum). To compliment this much improved and genuinely fantastic setup (I'm being serious, the brakes have never felt as consistently good since) I fitted a small breathing apparatus to the exhaust manifold, along with some mix and match pipework to make it all breathe better

I'll drop in another time soon… Soon…

Not something I chose to do but had no choice, went to remove wheels on the missus car only to find the locking wheel nut key with a load of material taken off the top, wouldn't engage with the nut. Garage wanted 80 quid to remove 4 of them.

Didnt have the special tools for it so resorted to brute force and ignorance which worked quite well.

Firstly hammered off the outer "spinner" on the locking wheel nuts.

Then put the key in a vice and hammered from the opposite side, the corresponding outer part of the key is just splined in place.

Could still just about get the key to engage with a bit of horizontal force held while undoing, but they all came off happy days.

Took about 15mins all in all, now off to buy regular lug nuts..

If you didn't have the locking wheel nut key you could remove the outer spinner and get a rounded bolt socket with the teeth on the inside would work well aswell.

Coming from someone with the amount of work you've been doing on your cars that's high praise.

Got brownie points in the bag from the missus as I came back into the house and slowly revealed the locking wheel nuts in my hand. Something tells me Adam Sandler won't be the only person swinging a club as we watch Happy Gilmore 2 tonight 😂

Replaced front discs and pads, rear pads, and a CV boot on the missus MK3 Focus. 3 relatively simple jobs but what an absolute Ballache.

So..All 8 caliper slide pins seized in place, had to use flathead and a fair whack of a hammer to pop them out, greased up and ran a wire brush drill attachment through the holes. Both rear callipers quite tight, especially the left side, which also had a seized in retaining spring, had to leave it in and managed to change the pads with leaving it in place, spent too much time on it trying to remove.

Front brake discs were welded onto the hub, had to break out the size 4 Thor hammer.

Then the outer CV boot on drivers side looked like this.

All cleaned up

Fresh grease and the stretch boot went on pretty easy, easiest part of the job and I thought it'd be the hardest,went onto the cone no bother.

Didnt last long, the clamp supplied wouldn't close down, I have the correct tool and used multiple times, but just would not grab it, had to send the missus to woodies to buy a bag of €25 cable ties, madness.

Anyway its held in the meantime until I get a proper clamp.

If anyone can relate, it was one of those times where I was sitting on the couch after getting cleaned up, deflated, telling the missus im sick to death of cars 😅

The entire thing from setting up to having tools away and clean myself up was 5hrs. Had planned to bleed 4 corners but I just had nothing left by the end of it

Did an oil change and belt and tensioner last week which gave me awful trouble aswell