Triax TSC114 channels question

Videos from the lads here ….. how to add a transponder is the one your looking for.

E4 and Film 4 are on the same transponder

https://www.freetv.ie/triax-tsc114-saorview-combo-user-manual/

I would be rescanning 28.2 to pick up new transponders are and see if the box is actually getting a good signal and be using the HD versions if working ,some are not and you have to view SD versions.

Its an old video but shows the way to get your channels .

Might your dish have moved then if not picking up those channels .

My e4 is working on that setting

Do you have the ITV in Hd working?

Does not make sense picking it up in opposite direction .

Any new movements are picked up on a fresh scan and info on Kingofsat for all sats.

Your doing an auto scan. But the channels your looking for are on a transponder that's new enough on astra (well new in relation to that triax receiver so the preloaded default transponders are out of date. Long story short follow that video above but change auto scan to blind scan and your good to go. Just remember to delete all channels first to make sure the ones you get are from your fresh install. That particular receiver has given me plenty of nightmares but take the time (and you'll need it) to set it up right using favourites and it makes it a tiny teeny weeny bit more tolerable 🤣

My boxes never updated firmware and all i ever did was erase all channels on both sat and saorview and rescanned to bring up the new lists.