Replacing bathroom strip light with mirror with inbuilt light

vicwatson · 27-01-2023 02:05PM #1

Strip light only has Neutral and Live connections, new mirror with LED lights has an Earth connection.

Does a new cable need to be run for this install?

The strip light has a built in on/off switch and the mirror also has an on/off touch switch

Thinking aloud, I wonder if the cable is earthed to the spur and they just took a Neutral and Live off it.

meercat · 27-01-2023 05:07PM

https://www.boards.ie/discussion/2058281608/replacing-bathroom-strip-light-with-mirror-with-inbuilt-light

Yes a new cable is required

the circuit should also be rcd protected

only a rec is permitted to do electrical work in bathrooms

vicwatson · 27-01-2023 10:02PM

Yea I’m aware of that thanks for post

vicwatson · 27-01-2023 10:03PM

https://www.boards.ie/discussion/comment/120166395#Comment_120166395

Wouldn’t the existing light be RCD protected already

meercat · 28-01-2023 07:33AM

https://www.boards.ie/discussion/comment/120167956#Comment_120167956

Depends on the age of the installation

id say it is unlikely if there’s no earth

vicwatson · 28-01-2023 09:49AM

https://www.boards.ie/discussion/comment/120168706#Comment_120168706

12 years

10-10-20 · 28-01-2023 10:01AM

https://www.boards.ie/discussion/comment/120168933#Comment_120168933

Surely you can see the CU and tell if it's an RCD?

vicwatson · 28-01-2023 11:06AM

No, there's no markings on the Consumer Unit

meercat · 28-01-2023 01:06PM

https://www.boards.ie/discussion/comment/120168933#Comment_120168933

Then it’s unlikely to have rcd protection. If a new cable is installed then it has to conform to current regulations

vicwatson · 30-01-2023 02:21PM

Well there are no markings on the CU for any of my circuits

vicwatson · 21-02-2023 06:19PM

What’s going on here?

meercat · 21-02-2023 07:52PM

https://www.boards.ie/discussion/comment/120271570#Comment_120271570

Sparks used the wrong coloured cable

theyll need to be replaced anyway as there’s no earth. Post #2 covers it.

vicwatson · 21-02-2023 10:52PM

Why did they use 3 neutral cables I wonder, hmmmm

kirk. · 22-02-2023 12:34PM

https://www.boards.ie/discussion/comment/120273132#Comment_120273132

Probably used blue for all the lighting , not very clever

jumbone · 23-02-2023 04:26PM

https://www.boards.ie/discussion/comment/120169167#Comment_120169167

any test buttons?

3 neutrals could be loop in, loop out and feed to the light just like a standard ceiling rose. would need to see more of the wiring to be sure e.g. where the red cable was coming from/going to

vicwatson · 23-02-2023 09:06PM

https://www.boards.ie/discussion/comment/120279929#Comment_120279929

The red cable is part of the strip light. The strip light just has neutral and live connections

Replacing bathroom strip light with mirror with inbuilt light

Comments