Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

iBoost+ running very occasionally at night?

  • 06-04-2022 3:16pm
    #1
    mustang68
    Registered Users, Registered Users 2 Posts: 1,116 ✭✭✭


    I have a solar set up with battery and iBoost, and a few times I've caught it heating the hot tank by a few watts (2->14w) at night for maybe 5 to 10 seconds. I'm not worried about the power consumption as it is minuscule, my question is why? I works as expected the rest of the time.



Comments

  • #2
    mswomex
    Registered Users Posts: 10 ✭mswomex


    I have noticed the same also but have been unable to determine why. Any thoughts from other contributors?



  • #3
    spose
    Registered Users Posts: 301 ✭✭spose


    Have found that it tends to happen just after something drawing a load stops. Think its that when the load ends the battery doesnt stop immediately and the iboost sees the export and ramps up to take it. I increased the threshold that the iboost will kick in and it seems to reduce it a lot. At the 100mA default it would happen very regularly, 150mA reduced it a good bit and haven't noticed it at all now at 250mA.



  • #4
    E30M3
    Registered Users Posts: 321 ✭✭E30M3


    https://www.boards.ie/discussion/comment/119593417#Comment_119593417

    Where / how do you increase the threshold? On the iboost or elsewhere



  • #5
    spose
    Registered Users Posts: 301 ✭✭spose


    Info and instructions are here…

    https://www.marlec.co.uk/solar-iboost-user-operating/




  • #6
    bonoman66
    Registered Users, Registered Users 2 Posts: 618 ✭✭✭bonoman66


    https://www.boards.ie/discussion/comment/119593417#Comment_119593417

    +1

    Only recently had an Eddi installed (have DC batteries as well as panels) & had noticed the same thing on 2 occasions at night. On both occasions the Eddi would indicate heating but I wasn't really exporting much (export limit of 150w set up before Eddi is meant to kick in). The common theme was I had just switched off some high load device - like Cooker with Oven,Grill, Hobs on (that was being fed by battery at the time) or maybe Kettle etc.. What you say matches what I think I've been seeing. Thanks for sharing. Always learning



  • Advertisement
Advertisement