If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Cleaning/Polishing irons

Motivator · 2021-10-29 10:04:36

Anyone know the best way to get scuff/scratch marks off irons without damaging the clubface? I don’t want to use any polish or something unsuitable for obvious reasons.

29-10-2021 11:04am

#1

Motivator

Registered Users Posts: 2,781 ✭✭✭

Join Date: November 2012

Posts: 2747

Anyone know the best way to get scuff/scratch marks off irons without damaging the clubface? I don’t want to use any polish or something unsuitable for obvious reasons.

0

Comments

#2 29-10-2021 11:25am

prawnsambo

Registered Users, Registered Users 2 Posts: 13,375 ✭✭✭✭

Join Date: February 2016

Posts: 13338

https://www.boards.ie/discussion/2058215431/cleaning-polishing-irons

I would think that anything that would remove scratches would by definition damage the face. The only way to remove scratches without removing some of the metal surrounding the scratch would be to add metal to it. Which wouldn't exactly be something you could do yourself or quite frankly want to do since it requires lots of heat.
You could possibly use a light abrasive paste like T-Cut that would have minimal effect on the surface and would possibly clean it up a little, but I would experiment on an old club before I tried anything like that.

0
#3 29-10-2021 3:58pm

dan_ep82

Registered Users Posts: 2,726 ✭✭✭

Join Date: May 2010

Posts: 2658

If they're a shiny metal just use metal polish.
If they're painted there's not much you can do.

0