Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Insert stove instead of freestanding

  • 24-08-2021 8:13pm
    #1
    minnow
    Registered Users Posts: 202 ✭✭


    Hi,

    Our house was built with provision for a free-standing stove, with the chimney pipe coming out from the wall. At the time we didn't want to install so it was blocked up.

    5 years later we want to install a stove but would prefer a inset type to avoid taking up for space with a free standing stove - we also prefer the look.

    Can an inset drive be retrofitted into the chimney breast that wasn't designed for it? i.e. cut out the hole to take it?



Comments

  • #2
    ec_pc
    Registered Users, Registered Users 2 Posts: 449 ✭✭ec_pc


    We installed a Henley inset /casette type stove when renovating and I had to give the builder a downloaded copy of the manual as he needed to ensure the new chimney and opening were correct. I suppose the only challenge you may face is depth of the opening - will it take an inset stove?

    Major advantage of this type of stove is that it does not impact the airtightness of the house. Our stove takes an air supply from outside the house, basically a pipe runs under the cement floor to a vent.



  • #3
    ec_pc
    Registered Users, Registered Users 2 Posts: 449 ✭✭ec_pc


    Apologies for double post, Boards bug.



Advertisement