Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Replacing some sheets of corrugated Tin on an old roof

  • 16-08-2021 10:42pm
    #1
    SGM978
    Registered Users Posts: 5 ✭


    well folks,


    I’m replacing old sheets of corrugated tin on an old shed. On the left hand side you can see the new sheets I’ve put down but I’ve ran into trouble now here because the slots of the new sheets ( which are 42inches wide) won’t sit in correctly with the old sheets (which are 30 inches wide ). There is enough of an overlap but the slots won’t meet up. 


    Bit worried now what to do! Any help from Roofers appreciated.

    311B8521-3582-4CE7-B906-96A2C537505F.jpeg
    17C9E60B-80F5-4357-B178-6FC4176DA51E.png




Comments

  • #2
    148multi
    Registered Users, Registered Users 2 Posts: 1,610 ✭✭✭148multi


    Take off two more of the old ones, the extra new ones will creep the corragation into line.

    Not a roofer though.



  • #3
    minerleague
    Registered Users, Registered Users 2 Posts: 1,110 ✭✭✭minerleague


    https://www.boards.ie/discussion/comment/117764567#Comment_117764567

    if distance between corrugations is same on old and new this wont help. OP measure distance between 2 high points on old sheets and then same on new.

    Were you working off other old sheets to the left on your picture?



  • #4
    _Brian
    Registered Users, Registered Users 2 Posts: 18,617 ✭✭✭✭_Brian


    I thought corrigations were standard though ??

    we replaced some sheets last summer on a shed from mid 70’s and the new sheets matched perfect.



  • #5
    funkey_monkey
    Registered Users, Registered Users 2 Posts: 8,411 ✭✭✭funkey_monkey


    How many sheets is it to the end? Can you lift one of the old sheets and see if the profile allows it to overlap properly with your replacement sheets.

    If so, then I suggest if it wasn't many you could lift and re-lay the old sheets, then the overlap issue should be resolved - providing you are going square and the shed also is square. At the gable end you can then deal with it depending on how you want it to look - either leave an overhang, bend the excess down or cut & galv spray and then a side piece.



  • #6
    wrangler
    Registered Users, Registered Users 2 Posts: 11,224 ✭✭✭✭wrangler


    https://www.boards.ie/discussion/comment/117766185#Comment_117766185

    I'm repairing clearlights here and they're working perfect too, they're wider sheets but the corrugations are coming in perfect



  • Advertisement
Advertisement