Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Dublin - BusConnects

Options
19394969899118

Comments

  • Registered Users Posts: 9,277 ✭✭✭cgcsb


    The H Spine will launch in Mid/Late June now.

    The reason for the delay is two-fold and related directly to Level 5 restrictions.

    1. Some construction is required to bus stops along the spine for new bus poles, shelters and moving bus stops closer to junctions for interchange but as construction was not permitted under Level 5 that could not go-ahead

    2. Prior to the launch of the Spine the NTA wanted to have brand ambassadors on the street giving people in formation on the new routes but obviously that was not permitted under Level 5.

    The rest of the spines have been only slightly delayed as a result. The next Spine due for launch is the C in September, which has been pushed back to October, but the NTA said that further delays to the rollout would be recouped by them just working harder to get back on track

    Any info on the O, N2, and W routes? I think these had a misprint in the date on the previous release.


  • Registered Users Posts: 143 ✭✭yascaoimhin


    cgcsb wrote: »
    Any info on the O, N2, and W routes? I think these had a misprint in the date on the previous release.

    The W routes are out for tender and are due for implementation in Dece,ber this year.

    The O and N routes arent due until March 2022


  • Moderators, Business & Finance Moderators, Motoring & Transport Moderators, Society & Culture Moderators Posts: 67,845 Mod ✭✭✭✭L1011


    If the C spine is launched without the W6 in place there will be... problems, as the W6 is replacing the Celbridge-Maynooth link of the 67. w

    Which is extensively used, particularly at school times. The John of Gods services also have a number of step-down houses in Maynooth with clients that would need to travel to Celbridge up to daily, and use the 67.

    Temporarily extending the C4 to Maynooth would solve it but need extra vehicles, and probably lead to calls to not shorten it back


  • Registered Users Posts: 2,181 ✭✭✭VonLuck


    The rest of the spines have been only slightly delayed as a result. The next Spine due for launch is the C in September, which has been pushed back to October, but the NTA said that further delays to the rollout would be recouped by them just working harder to get back on track

    I'm sure there's a logical reason, but why are all the routes so spaced out (timeline wise). Can they not construct some of them concurrently?


  • Registered Users Posts: 143 ✭✭yascaoimhin




  • Advertisement
  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    VonLuck wrote: »
    I'm sure there's a logical reason, but why are all the routes so spaced out (timeline wise). Can they not construct some of them concurrently?

    You need to think about this. There are two separate projects here.

    The post to which you replied is referring to the redesigned route network implementation.

    The corridor infrastructure is a separate project that is going to ABP this summer.

    The work involved in developing schedules is highly intricate and specialised. Doing it in one go really was never practical.

    Also there will be investment in additional buses and funding for them needs to be spread out.


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    L1011 wrote: »
    If the C spine is launched without the W6 in place there will be... problems, as the W6 is replacing the Celbridge-Maynooth link of the 67. w

    Which is extensively used, particularly at school times. The John of Gods services also have a number of step-down houses in Maynooth with clients that would need to travel to Celbridge up to daily, and use the 67.

    Temporarily extending the C4 to Maynooth would solve it but need extra vehicles, and probably lead to calls to not shorten it back

    There will be crossover between spine phases. A temporary connection between the two towns could still be maintained until the full W6 is launched.


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer



    Still plenty of unanswered questions.

    How will the short fare distance be measured?
    Will it mean that the fare stages are retained and that it is for 1-3 stages as at present?

    Will the rail zones be clearly publicised?

    How will all of this be presented and explained to the public?

    Fare stages for GoAhead routes are not even available to the public.

    Transparency and clear explainers are needed!


  • Registered Users Posts: 143 ✭✭yascaoimhin


    LXFlyer wrote: »
    Still plenty of unanswered questions.

    How will the short fare distance be measured?

    3km
    LXFlyer wrote: »
    Will it mean that the fare stages are retained and that it is for 1-3 stages as at present?
    No
    LXFlyer wrote: »
    Will the rail zones be clearly publicised?
    They already are
    LXFlyer wrote: »
    How will all of this be presented and explained to the public?
    Through marketing and on street ambassadors


  • Registered Users Posts: 2,181 ✭✭✭VonLuck


    LXFlyer wrote: »
    You need to think about this. There are two separate projects here.

    The post to which you replied is referring to the redesigned route network implementation.

    The corridor infrastructure is a separate project that is going to ABP this summer.

    The work involved in developing schedules is highly intricate and specialised. Doing it in one go really was never practical.

    Also there will be investment in additional buses and funding for them needs to be spread out.

    Yes I understand that but there are construction works associated with the implementation of the routes i.e. bus stops, shelters etc. The larger works with CPO's and realignment of roads will obviously take longer to develop.

    That's a reasonable point regarding funding, if that indeed is a main factor in their timeline.


  • Advertisement
  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    3km


    No


    They already are


    Through marketing and on street ambassadors

    With all due respect, I suspect that the real answer to that level of detail is you don’t know.

    There has to be a basis for how ticket machines will know how far the short fare is valid to at any point along the route. At the moment that’s using fare stages. The machines can’t calculate 3km - there needs to be a physical fixed basis.

    I’m interested in the detail, not the broad brush as that’s what counts.

    And no, the IE rail fare zones are certainly not clearly publicised. The fares are available from the fare calculator on the IE site, but the suburban fares matrix isn’t published there and the vast majority of people other than those of us with a specific interest wouldn’t have a clue what “zone 4” means.

    For the record I do know but 99% of people won’t.

    I’m pretty sure that I’ve been around a lot longer than you, and I wouldn’t in any shape or form be as confident about how this will be explained to Joe Public. Customer information has been the Achille’s heel of all the transport companies over the years, and while the NTA have got some things right, they still make some pretty basic mistakes (such as leaving on street timetables out of date for a year on a whole swathe of orbital routes).


  • Moderators, Motoring & Transport Moderators, Technology & Internet Moderators Posts: 22,509 Mod ✭✭✭✭bk


    3km

    Hmm.. That seems much further then the current short Stage 1 to 3 fare.

    I'm less then 3km from O'Connell St, 5 stages and currently pay €2.25 on leap. So it sounds like I'll be included in this new wider zone.

    This is disappointing as I assume to get this fare I'll need to continue to interact with the driver. It sounds like lots more people will continue to be interacting with the driver then might otherwise do.

    And I've no doubt, lots will ask for this fare and travel much further then the 3km.

    Sounds like it will be a mess, couldn't they have just given us a truly flat fare.


  • Registered Users Posts: 9,277 ✭✭✭cgcsb


    LXFlyer wrote: »

    I’m pretty sure that I’ve been around a lot longer than you,
    You just can't help yourself can you? Honestly who are you to talk down to people? I bet you don't go on like that in real life.


  • Registered Users Posts: 14,790 ✭✭✭✭loyatemu


    is it 3km along the road or as the crow flies?
    how are passengers supposed to know how far away their destination stop is?
    are they still taking cash on the buses (sorry, haven't been on one for some time for obvious reasons)?

    as bk says, this seems like a compromise to head off complaints that willl negate many of the benefits of the 90 minute fare.


  • Registered Users Posts: 9,277 ✭✭✭cgcsb




  • Moderators, Motoring & Transport Moderators, Technology & Internet Moderators Posts: 22,509 Mod ✭✭✭✭bk


    Thinking about it, maybe they can set the right hand validator by the door to automatically give the 90 minute ticket, while having the driver validator automatically give a "short" fare without any driver interaction. That might work.

    I can still for-see issues with folks getting the "short" ticket and travelling too far. But at least it would allow for speedy boarding times.


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    cgcsb wrote: »
    You just can't help yourself can you? Honestly who are you to talk down to people? I bet you don't go on like that in real life.

    I actually meant what I said literally, in terms of the fact that I’m older than that poster concerned (assuming that they are the main person behind DCC).

    Watching and studying the quality of information for over forty years in detail that the transport companies put out (including the NTA) would not lead me to share their confidence that the brand ambassadors are going to know much more than high level stuff, or more importantly that the NTA are going to get this kind of thing right.


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    bk wrote: »
    Hmm.. That seems much further then the current short Stage 1 to 3 fare.

    I'm less then 3km from O'Connell St, 5 stages and currently pay €2.25 on leap. So it sounds like I'll be included in this new wider zone.

    This is disappointing as I assume to get this fare I'll need to continue to interact with the driver. It sounds like lots more people will continue to be interacting with the driver then might otherwise do.

    And I've no doubt, lots will ask for this fare and travel much further then the 3km.

    Sounds like it will be a mess, couldn't they have just given us a truly flat fare.

    It does indeed seem much longer - I expected a 1-3 stage distance too and the main fare to be a merger of the current €2.25 and €2.50 fares.

    That to me sounds like it is going to cause problems like the ones that you suggest.


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    To go back to people using rail - the twitter thread linked to above would suggest that people making rail journeys from any of the following Dublin Short Hop Zone stations - Balbriggan, Skerries, Kilcock, Maynooth, Sallins & Naas, Greystones or Kilcoole to a city centre station would be outside the scope of being able to avail of the 90 minute ticket benefits (note that Maynooth customers could change to LUAS at Broombridge and avail of it).

    Would they still get a LEAP90 discount as they do now? Or will they lose out?

    To explain this, Irish Rail fares in the Dublin short hop zone (the area within which fares are more heavily subsidised) are set on the basis of six different fares calculated based on the distance between two station combinations.

    They don't use zones as in London or as on LUAS, but rather are based on individual station combinations. Hence my comment about how this will be somewhat complicated to explain to people. Someone would need to know how far they can travel for EUR 2.80 on LEAP from a particular station if they are to be able to use the 90 minute unlimited travel.


  • Registered Users Posts: 143 ✭✭yascaoimhin


    bk wrote: »
    Thinking about it, maybe they can set the right hand validator by the door to automatically give the 90 minute ticket, while having the driver validator automatically give a "short" fare without any driver interaction. That might work.

    I can still for-see issues with folks getting the "short" ticket and travelling too far. But at least it would allow for speedy boarding times.

    Pretty much how it works now. The 90 minute fare is due to replace the €2.50 "Over 13 stages" fare that you get automatically it you tap your leap on the right hand validator.

    Phase 1 of the change over will replace the
    1-3 Stages
    4-12 Stages and
    Over 13 Stages fares with

    Short
    Medium and
    Long fares.

    Then they'll get rid of the medium fare and change the Long to the 90 minute. Tag on the right for long, tag on the left for short


  • Advertisement
  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    Pretty much how it works now. The 90 minute fare is due to replace the €2.50 "Over 13 stages" fare that you get automatically it you tap your leap on the right hand validator.

    Phase 1 of the change over will replace the
    1-3 Stages
    4-12 Stages and
    Over 13 Stages fares with

    Short
    Medium and
    Long fares.

    Then they'll get rid of the medium fare and change the Long to the 90 minute. Tag on the right for long, tag on the left for short

    Thanks for that update - but the detail of how this is planned to work in practice is what we need to understand - how will the fares calculated using the driver's machine?

    That cannot be done on a distance basis so I am struggling to understand how it could work without fare stages?

    Before I get accused of it again, I'm not having a go - I am genuinely perplexed about this.


  • Registered Users Posts: 10,523 ✭✭✭✭MJohnston


    LXFlyer wrote: »
    Thanks for that update - but the detail of how this is planned to work in practice is what we need to understand - how will the fares calculated using the driver's machine?

    That cannot be done on a distance basis so I am struggling to understand how it could work without fare stages?

    Before I get accused of it again, I'm not having a go - I am genuinely perplexed about this.

    Why could a drivers machine not calculate based on distance?


  • Moderators, Motoring & Transport Moderators, Technology & Internet Moderators Posts: 22,509 Mod ✭✭✭✭bk


    Pretty much how it works now. The 90 minute fare is due to replace the €2.50 "Over 13 stages" fare that you get automatically it you tap your leap on the right hand validator.

    Phase 1 of the change over will replace the
    1-3 Stages
    4-12 Stages and
    Over 13 Stages fares with

    Short
    Medium and
    Long fares.


    Then they'll get rid of the medium fare and change the Long to the 90 minute.

    So to be clear. Are you saying that after Phase 2, the Short fare will cover what is now Stages 1 to 12? Or perhaps some variant of that, like Stage 1 to 6?

    Because 3km is much longer than the current Stage 1 to 3, it is more like Stage 1 to 6.
    Tag on the right for long, tag on the left for short

    But the key question is, will you still need to interact with the driver like you do now when getting a ticket from the drivers ticket machine?

    Will you have to hold your card on the ticket machine, tell the driver how far you are going and wait for the driver to press a couple of buttons on the ticket machine to enter the fare?

    Or will you just be able to quickly hold the card there and automatically get a short fare ticket without talking with the driver or needing the driver to take any action.

    If it is the latter, it might be ok (but folks with cash will still get in the way), but if it the former, like today, then it is a disaster and would just continue the rubbish dwell times we have today.

    I hope they have thought this out.


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    MJohnston wrote: »
    Why could a drivers machine not calculate based on distance?

    How is it going to know what stop is 3km away for every stop at a particular point in time?

    These machines aren't exactly powerful in terms of memory.

    Each route surely will need some method of assigning the fares to a range of stops along the route.

    Also, as a passenger, I can look at a Dublin Bus timetable and quickly calculate the fare if I want to beforehand by looking at the fare stages. Will I still be able to do that?


  • Registered Users Posts: 17,559 ✭✭✭✭LXFlyer


    bk wrote: »
    So to be clear. Are you saying that after Phase 2, the Short fare will cover what is now Stages 1 to 12? Or perhaps some variant of that, like Stage 1 to 6?

    Because 3km is much longer than the current Stage 1 to 3, it is more like Stage 1 to 6.



    But the key question is, will you still need to interact with the driver like you do now when getting a ticket from the drivers ticket machine?

    Will you have to hold your card on the ticket machine, tell the driver how far you are going and wait for the driver to press a couple of buttons on the ticket machine to enter the fare?

    Or will you just be able to quickly hold the card there and automatically get a short fare ticket without talking with the driver or needing the driver to take any action.

    If it is the latter, it might be ok (but folks with cash will still get in the way), but if it the former, like today, then it is a disaster and would just continue the rubbish dwell times we have today.

    I hope they have thought this out.

    I'd certainly worry about far more people paying the lower fare if the distance that it applies is increased - the 1-3 stage fare corresponds mainly to journeys of up to about 2km at the moment.

    That could mean more fare evasion and not have any real impact on dwell times.


  • Registered Users Posts: 10,523 ✭✭✭✭MJohnston


    LXFlyer wrote: »
    How is it going to know what stop is 3km away for every stop at a particular point in time?

    These machines aren't exactly powerful in terms of memory.

    Each route surely will need some method of assigning the fares to a range of stops along the route.

    Also, as a passenger, I can look at a Dublin Bus timetable and quickly calculate the fare if I want to beforehand by looking at the fare stages. Will I still be able to do that?

    Seems to me it’d be fairly easy to program in the distance from stop X to stop Y - you could give each stop a latitude-longitude value, which would only add around 2 bytes per stop. That’s 2 kilobytes per 1000 stops, which is a minuscule amount of memory, even if the whole machine only has even 1MB thats 0.2% of available memory per 1000 stops (how many does Dublin have?)

    Then the distance between two stops is just simplified to the distance between their geopoints. That’d favour the customer if the as-the-crow-flies distance is less than the actual travelled distance, but that would be minimal between most stops. And it could never be the other way around (crow-flies distance being the shortest possible connection between two points).

    I’d be happy with that system. It could be easily marked on network maps and apps, because each stop would have a circular radius to display, rather than some unnecessarily complex distance-by-road map.


  • Registered Users Posts: 800 ✭✭✭Busman Paddy Lasty


    ^^ +1 was about to post similar bit with no technical knowhow! Tag on left validator and get a ticket with 'valid to Stop XXXX' or something like that. Policing it with fare inspectors is another matter though as would require staff and a card reader. Otherwise people not needing a connection could pay the short hop fare.

    Why not buy in a system from another country that is already proven? I've been abroad and seen systems like; tag on front door - full fare deducted. Tag off (and exit) rear door - fare calculated and rebate given if necessary.

    Over here any stops deemed unsafe for middle door exit to be remodelled or even removed if there is a stop nearby.


  • Moderators, Motoring & Transport Moderators, Technology & Internet Moderators Posts: 22,509 Mod ✭✭✭✭bk


    MJohnston wrote: »
    Seems to me it’d be fairly easy to program in the distance from stop X to stop Y - you could give each stop a latitude-longitude value, which would only add around 2 bytes per stop. That’s 2 kilobytes per 1000 stops, which is a minuscule amount of memory, even if the whole machine only has even 1MB thats 0.2% of available memory per 1000 stops (how many does Dublin have?)

    DB has 5,000 stops and the TGX150 only 1MB of storage.

    Keep in mind that the ticket machine also needs to store data on every single ticket fare collected throughout the day + all topups to be applied to tickets for that day + any lost/stolen cards to be revoked.

    It can all add up and 1MB would be quiet tight, but it probably would just about be doable.
    ^^ +1 was about to post similar bit with no technical knowhow! Tag on left validator and get a ticket with 'valid to Stop XXXX' or something like that. Policing it with fare inspectors is another matter though as would require staff and a card reader. Otherwise people not needing a connection could pay the short hop fare.

    Fare evasion is the key issue here. Bus drivers is how fare evasion is mostly enforced on Dublin Bus. In 20 years of taking buses on Dublin, I've never seen an inspector.

    I can kind of see how it might sort of work for the normal into town routes.

    Take a route like the 41 from Swords to City Center. If someone tags on a short fare in Drumcondra heading to town, a driver would know that it is well within 3km of the city center, so probably say nothing *. On the other hand if someone in Swords tried to go tag on for the short fare, the driver might be suspicious and stop them and ask where they are going, as it would be unusual. Of course the person might only be going a few stops to visit a friend, but a driver could keep an eye on it.

    * Of course a person boarding in Drumcondra might head well beyond the city center, and thus beyond 3km. But I'd say 90%+ people get off in one of the city center stops, so probably not worth stressing about.

    In some ways this isn't much different to the moment. Nothing stopping someone asking for a short fare, lying about the bus stop they will get off and travel much further. It happens all the time. It is up to observant drivers to notice where such people are getting off and challenging them when they leave.

    In some ways this might make it a little simpler for them. As there will be only one short fare to watch out for rather then many now.

    BTW This is what 3km from O'Connell Bridge looks like:
    https://2kmfromhome.com/share?lat=53.34737470187197&lon=-6.259117126464845

    Maybe it would be easier if they just made it a zone system like London, saying the short fare is any trip within the above 3km circle. But I can see the objections to that too.

    The key question for me though that hasn't been answered yet, is will this new short fare actually be automated. Like a simple tap-on with no interaction?

    Also I'd like to see them add a separate automated validator next the driver, on the door, outside of the actual ticket machine. Would be easier then actually having to reach into the ticket machine to place the card.


  • Moderators, Science, Health & Environment Moderators Posts: 19,410 Mod ✭✭✭✭Sam Russell


    bk wrote: »
    BTW This is what 3km from O'Connell Bridge looks like:
    https://2kmfromhome.com/share?lat=53.34737470187197&lon=-6.259117126464845

    That is actually 20 km from O'Connell Bridge, not 3 km.


  • Advertisement
  • Registered Users Posts: 1,126 ✭✭✭p_haugh


    That is actually 20 km from O'Connell Bridge, not 3 km.

    I think that page resets the radius to 20km each time you load it, hence why it's not showing 3km


Advertisement