Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

What to do?!

  • 27-08-2016 2:26am
    #1
    Mr. Tezza
    Registered Users, Registered Users 2 Posts: 593 ✭✭✭


    Hey guys and gals,

    I have a bit of a dilemma...

    I've 2 pistols, both USP .45s, both are the original KSC pre system 7 models, but the mags for them and the 2 extra mags I have are leaking.

    My question is do people think I should go all out and buy newer ( system 7) USP .45s or should I try and get the mags fixed and stick with the ones I have?

    Any advice/ideas welcome!


Comments

  • #2
    thermo
    Registered Users, Registered Users 2 Posts: 13,439 ✭✭✭✭thermo


    Leaks are generally able to be fixed for around a fiver a mag..... How much are new mags?


  • #3
    Mr. Tezza
    Registered Users, Registered Users 2 Posts: 593 ✭✭✭Mr. Tezza


    thermo wrote: »
    Leaks are generally able to be fixed for around a fiver a mag..... How much are new mags?

    You can't get pre system 7 mags! I'd have to buy a Umarex USP. 45, they're about €200!


  • #4
    thermo
    Registered Users, Registered Users 2 Posts: 13,439 ✭✭✭✭thermo


    Well if your mags are beyond repair and it looking at a new pistol then Tm or VFC/stark arms pistols would be worth looking at.


  • #5
    Voodoomelon
    Registered Users, Registered Users 2 Posts: 9,660 ✭✭✭Voodoomelon


    Where are the magazines leaking from? I have x4 pre System 7 USP magazines and all have leaked from around the base and I've repaired all of them with PTFE tape.


  • #6
    Mr. Tezza
    Registered Users, Registered Users 2 Posts: 593 ✭✭✭Mr. Tezza


    Voodoomelon wrote: »
    Where are the magazines leaking from? I have x4 pre System 7 USP magazines and all have leaked from around the base and I've repaired all of them with PTFE tape.

    Interesting, I'm not sure where they are leaking from, could you take a picture of the repair if possible, thinking mine might be leaking from the same area.


  • Advertisement
  • #7
    Voodoomelon
    Registered Users, Registered Users 2 Posts: 9,660 ✭✭✭Voodoomelon


    It should be pretty clear where they're leaking from. Pop the baseplates off and fill with gas. Then hold your finger against the base in different places until the hissing stops, you'll find your leak.


  • #8
    Skatedude
    Registered Users, Registered Users 2 Posts: 2,674 ✭✭✭Skatedude


    Voodoomelon wrote: »
    It should be pretty clear where they're leaking from. Pop the baseplates off and fill with gas. Then hold your finger against the base in different places until the hissing stops, you'll find your leak.

    or just put in water and watch the bubbles. The valves often start to leak if un used for a while as the seals dries out, And some mags also have a retanguler o-ring which also dries out.

    If it's possible to take the mags apart and soak the rubbers in silicon oil for a while then reassemble them and see.


Advertisement