Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.

https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

hkc saab to menvier ts700 panel connections

johnj1 · 2014-08-21 22:43:18

Hi everyone,im want to replace an old bell box with a hkc sabb connected to a menvier ts700 panel.The old box was connected wrong as the tampers were not even used.The terminals on the menvier panel are TRG- ,STB- ,TR- ,H/O+ ,H/O- .Would be grateful if someone could tell me which terminals these go to in the hkc sabb,thanks

21-08-2014 11:43PM

#1

johnj1

Registered Users, Registered Users 2 Posts: 3 ✭

Join Date: February 2014

Posts: 1

Hi everyone,im want to replace an old bell box with a hkc sabb connected to a menvier ts700 panel.The old box was connected wrong as the tampers were not even used.The terminals on the menvier panel are TRG- ,STB- ,TR- ,H/O+ ,H/O- .Would be grateful if someone could tell me which terminals these go to in the hkc sabb,thanks

0

Comments

#2 23-08-2014 11:01PM

johnj1

Registered Users, Registered Users 2 Posts: 3 ✭

Join Date: February 2014

Posts: 1

Hi again,sorry had to give ye an akwkard one,thankfully it wasnt just me that couldnt figure it.this is how its done for anyone else that might need it.trg- to hkc bell- ,stb- to hkc strobe-,tr- to hkc tamper return,h/o+ to hkc bell+,h/0- to hkc hold off then link bell+ to strobe+ in hkc,thanks

0