Hana clone

accaguest

With Swiss Post, how much in Euro came out of your paypal account for it? Also, is it a 'smooth, steady' kind of vape, do you notice any drops or kicks when firing? Thanks.

grindle

rickyjb wrote: »

Hi Grindle, I've been keeping an eye on the IPV and would be very interested to know how you get on with yours, particularly how it reads resistances and how sturdy the 510 connector is (usually the achilles heel of regulated devices).

Heyaaaaaa... Just started using it today as I wasn't home.

Mine reads resistances perfectly, just threw a few builds onto it and they're all reading the same as my multimeter and my Lavatube v1.5.

The 510 seems sturdy enough but only time tells the tale there. Mine had a small burr of metal in it, so make sure your threads are clean before use or you'll be confused as to why it won't fire.

I'll have to come back in a week or so to say how I find the battery life.

Jonathanpbk

accaguest wrote: »

With Swiss Post, how much in Euro came out of your paypal account for it? Also, is it a 'smooth, steady' kind of vape, do you notice any drops or kicks when firing? Thanks.

Sorry for not getting back to you till now. The shipping was only 1 dollar!

Also, after using it for a couple of days now, it's a very smooth vape! I haven't noticed any fluctuation when firing. It's lovely and smooth!

accaguest

Thanks, so probably about €44 all in if it gets through customs ok.

Good about smooth vape, my vamo boxes are horrendous. Could be the wiring's too thin or the batts are crap but it's a random lucky dip with them. Fire...nothing...sledgehammer hit...small hit...cut off...sledgehammer... My joyetech ego twist seems like a Provari in comparison.

jousting with chairs

I can second that,no misfires or drop in wattage.
Mine is working really well and you get used to 2 second delay before the first vape.The trick is to click the button as soon as you put your hand on it then by the time it reaches your mouth it's ready to fire

Jonathanpbk

One more plus I thought I'd mention: I have been running this at 15w with a Kayfun Lite clone at around 1.7ohms (read as 1.8 on the "hana") and it seemed to hit harder and faster than 15w on my SVD. So I put the KFL on my SVD to test and it definitely wasn't firing as fast as the hana which I found weird since they're both running at 15w. So I checked what voltage the hana was firing at (5.2v) and set the SVD to that and the hana still hit harder and faster.

I don't understand why, but I like it! :P

rickyjb

grindle wrote: »

Heyaaaaaa... Just started using it today as I wasn't home.

Mine reads resistances perfectly, just threw a few builds onto it and they're all reading the same as my multimeter and my Lavatube v1.5.

The 510 seems sturdy enough but only time tells the tale there. Mine had a small burr of metal in it, so make sure your threads are clean before use or you'll be confused as to why it won't fire.

I'll have to come back in a week or so to say how I find the battery life.

Thanks, keep us posted. What's the lowest res coil you've used and how does it fire?

Hal1

Ohhh yeahhh, a little parcel just arrived and has singapore post on the label .

jousting with chairs

Jonathanpbk wrote: »

One more plus I thought I'd mention: I have been running this at 15w with a Kayfun Lite clone at around 1.7ohms (read as 1.8 on the "hana") and it seemed to hit harder and faster than 15w on my SVD. So I put the KFL on my SVD to test and it definitely wasn't firing as fast as the hana which I found weird since they're both running at 15w. So I checked what voltage the hana was firing at (5.2v) and set the SVD to that and the hana still hit harder and faster.

I don't understand why, but I like it! :P

If the SDV is like the Vamo you have to stack 2 18350 batteries to get the full wattage.A single 18650 will only give you 12 watts on the Vamo even though the screen is showing 15 watts.

jousting with chairs

Hal1 wrote: »

Ohhh yeahhh, a little parcel just arrived and has singapore post on the label .

Anything nice?

Hal1

jousting with chairs

Ah,very nice.
Still loving my red one but haven't pulled the trigger on the mini yet.

Hal1

It's a nice size fits the palm fairly well. There is a bit of weight to it. I love it.

allen175

Still no update on mine arriving, stuck on export. I emailed Malaysia pos to get an update, waiting for second reply.

Jonathanpbk

allen175 wrote: »

Still no update on mine arriving, stuck on export. I emailed Malaysia pos to get an update, waiting for second reply.

That's a real shame man... I suppose that's a sh!te lesson learned but at least you know now that Swiss Post is definitely the way to go in future!

Hope it arrives soon so you can finally enjoy it!

Hal1

I just unscrewed the backing plateon my HC. There was a cloned efest 18650 in there. I stuck in the real one and it's now charging. Better to have the real deal with short circuit protection in there.

Jonathanpbk

Hal1 wrote: »

I just unscrewed the backing plateon my HC. There was a cloned efest 18650 in there. I stuck in the real one and it's now charging. Better to have the real deal with short circuit protection in there.

Yeah, as I was saying earlier, it definitely seems to be a slightly dodgy battery. Better off staying away from it and putting in a real one!

allen175

A month and a half later and still no hana clone, I got an update from Malaysia post this morning saying that it was shipped on the 1st by surface post and will take 4-16 weeks to arrive!!

Never ordering batteries from fasttech again! lesson learned.

localchap

Jonathanpbk wrote: »

Now, does anybody know anyone that would want to buy an SVD and a Magneto? :P

Still want to sell SVD??If so how much??

localchap

By the way folks, those having this HANA modz clone box, could you confirm its designed by Cloupur? cos they say Cloupur one would be the best clone/

Jonathanpbk

localchap wrote: »

Still want to sell SVD??If so how much??

It's the same one as this one. I have the box and all.

I'll throw in 2 Efest 18500 batteries and let it go for 35 including postage.

localchap wrote:

By the way folks, those having this HANA modz clone box, could you confirm its designed by Cloupur? cos they say Cloupur one would be the best clone

Nah, mine is Fasttech's own version. Not as good as the Cloupor, but it does the job for me!

Hal1

I have no complaints at all with mine. It's fukin brillo .

localchap

Jonathanpbk wrote: »

Nah, mine is Fasttech's own version. Not as good as the Cloupor, but it does the job for me!

Oh, does anybody know where to get Cloupur version??Red lots of positive feedback about that version at vaping boards.

Jonathanpbk

Here's one of the results from my google search

allen175

After 150 days... it finally arrived with my 2 sony vtc5 batteries.

Just last week i contacted fasttech to say it hasn't arrived and got a full refund from them, so free hana mod and 2 batteries.

the only thing is the mod took a beating, the fire button wouldn't work, so i opened it up, most of the glue had come free and button had fallen down, i tried to glue it back on, but failed so i have ordered a new button.