Tokyo Marui MP7 AEP

darren ff

First in line for mags if you can get a buyer for the mp7

S.E.A.L.s

*BUMP*

focus 23

I have a friend who will be interested in this! I will tell him to make a boards account and contact you,i believe he would want the whole package

S.E.A.L.s

focus 23 wrote: »

I have a friend who will be interested in this! I will tell him to make a boards account and contact you,i believe he would want the whole package

Sounds good and please send him my way

It's much appreciated

S.E.A.L.s

*BUMP*

S.E.A.L.s

*BUMP*

S.E.A.L.s

Over 5000 people have not bought this excellent package, it could be you

Thomas Wadding

trade for an highly upgraded m4?

S.E.A.L.s

Thomas Wadding wrote: »

trade for an highly upgraded m4?

Please be specific about what you are offering and some pics would be appreciated

Thomas Wadding

Externals: Front flip up sight. Magpul handguard, pistol grip, stock, rear sight all genuine. Half the barrel screws off aswell so if you have another hopup with shorter barrel you can turn it into a cqb gun in bout a minute
Internals: Madbull 363 tight bore barrel. Ultimate hop up and rubber. G&p low resistence wiring and trigger. Wired with a deans connector for heat resistence. Ultimate air nozzle cylinder head and piston head. Shs steel bushings. Serious rate of fire and range of it. G&p high speed motor aswell. It was a d-boys but all that's left of that is the upper and lower receiver. I shimmed it greased it and adjusted the angle of engagement on the piston.Battery and charger also included.
Pic:
http://www.facebook.com/photo.php?fbid=10200184897719340&set=o.421275051217622&type=1&theater

S.E.A.L.s

Thomas Wadding wrote: »

Externals: Front flip up sight. Magpul handguard, pistol grip, stock, rear sight all genuine. Half the barrel screws off aswell so if you have another hopup with shorter barrel you can turn it into a cqb gun in bout a minute
Internals: Madbull 363 tight bore barrel. Ultimate hop up and rubber. G&p low resistence wiring and trigger. Wired with a deans connector for heat resistence. Ultimate air nozzle cylinder head and piston head. Shs steel bushings. Serious rate of fire and range of it. G&p high speed motor aswell. It was a d-boys but all that's left of that is the upper and lower receiver. I shimmed it greased it and adjusted the angle of engagement on the piston.Battery and charger also included.
Pic:
http://www.facebook.com/photo.php?fbid=10200184897719340&set=o.421275051217622&type=1&theater

Unfortunately DBoys and Delta Rings are against my religion

Thank you for the offer and wishing you all the best

Keegan

Any interest in a G&P Vltor Sentry?

Last chrono: .98j (Skan)
Approx 7 months old, used in game 3 times.
Hop rubber changed to madbull red and inner barrel swapped out for a madbull blacktight bore, ver 3.
Deans connectors.

comes with 7 mids (5 G&P, 2 Mag), 7.4 lipo and can throw in a acm 552.

In work at the moment but can post a pic if required when the boss isn't looking

Regards,
Keegan.

S.E.A.L.s

Keegan wrote: »

Any interest in a G&P Vltor Sentry?

Last chrono: .98j (Skan)
Approx 7 months old, used in game 3 times.
Hop rubber changed to madbull red and inner barrel swapped out for a madbull blacktight bore, ver 3.
Deans connectors.

comes with 7 mids (5 G&P, 2 Mag), 7.4 lipo and can throw in a acm 552.

In work at the moment but can post a pic if required when the boss isn't looking

Regards,
Keegan.

Hi Mate,

I'm interested and would like to see pics if you please?

Cheers

Keegan

As requested (top left), at the moment it's all I have as I'm in work and I took the file from my facebook.

I can get more individual pics up tonight when I'm home from work and yes now I remember the grip is included.

Regards,
Keegan.

S.E.A.L.s

Keegan wrote: »

As requested (top left), at the moment it's all I have as I'm in work and I took the file from my facebook.

I can get more individual pics up tonight when I'm home from work and yes now I remember the grip is included.

Regards,
Keegan.

Looks like a tasty bit of gun porn you have there and close up's of the package on offer would be appreciated yes

Keegan

SEALs_Ireland wrote: »

Looks like a tasty bit of gun porn you have there and close up's of the package on offer would be appreciated yes

I'll have them up after 7 tonight.

Regards,
Peter.

S.E.A.L.s

Keegan wrote: »

I'll have them up after 7 tonight.

Regards,
Peter.

Sounds good and cannot wait, as I'm after some G&P

Keegan

As requested, forgive the quality I'm using my phone.

The 2 mag mids are second hand from a F2000 user so they have been modded, also the Sentry is a CW thread but I forgot I had an adapter so I'll throw that in.

Regards,
Keegan.

S.E.A.L.s

Keegan wrote: »

Any interest in a G&P Vltor Sentry?

Last chrono: .98j (Skan)
Approx 7 months old, used in game 3 times.
Hop rubber changed to madbull red and inner barrel swapped out for a madbull blacktight bore, ver 3.
Deans connectors.

comes with 7 mids (5 G&P, 2 Mag), 7.4 lipo and can throw in a acm 552.

In work at the moment but can post a pic if required when the boss isn't looking

Regards,
Keegan.

Keegan wrote: »

As requested (top left), at the moment it's all I have as I'm in work and I took the file from my facebook.

I can get more individual pics up tonight when I'm home from work and yes now I remember the grip is included.

Regards,
Keegan.

Keegan wrote: »

As requested, forgive the quality I'm using my phone.

The 2 mag mids are second hand from a F2000 user so they have been modded, also the Sentry is a CW thread but I forgot I had an adapter so I'll throw that in.

Regards,
Keegan.

All is looking very good and have to ask, are all items on offer in full working order, with no damage or missing parts?

Also, are the mags metal or plastic please?

Keegan

SEALs_Ireland wrote: »

All is looking very good and have to ask, are all items on offer in full working order, with no damage or missing parts?

Also, are the mags metal or plastic please?

G&P mags are metal and haven't given issues yet, I've used king arms, blaster and madbull BB's.
MAG are plastic, as above with feeding and as stated have the F2000 mod.

No complaints with the AEG, in fact if you look at Airsoft Gearmods Hive video at 1.10 you'll see it in action.

Regards,
Keegan.

S.E.A.L.s

Keegan wrote: »

G&P mags are metal and haven't given issues yet, I've used king arms, blaster and madbull BB's.
MAG are plastic, as above with feeding and as stated have the F2000 mod.

No complaints with the AEG, in fact if you look at Airsoft Gearmods Hive video at 1.10 you'll see it in action.

Regards,
Keegan.

Cool beans and is the barrel length 363mm or longer / shorter, also, are you happy with a straight swap?

Keegan

SEALs_Ireland wrote: »

Cool beans and is the barrel length 363mm or longer / shorter, also, are you happy with a straight swap?

Barrel is 285mm, I'm happy with a straight swap if you are.

Just to recap my offer is,
G&P Vltor Sentry + original grip
7 mids
ACM 552
CW-CCW adapter

And I also found the rail covers that came with it so I'll throw them in.

Regards,
Keegan.

S.E.A.L.s

Keegan wrote: »

Barrel is 285mm, I'm happy with a straight swap if you are.

Just to recap my offer is,
G&P Vltor Sentry + original grip
7 mids
ACM 552
CW-CCW adapter

And I also found the rail covers that came with it so I'll throw them in.

Regards,
Keegan.

Believe there is a 7.4v Lipo battery with this too and if so, I'm happy to accept your offer and move to PM's

Keegan

SEALs_Ireland wrote: »

Believe there is a 7.4v Lipo battery with this too and if so, I'm happy to accept your offer and move to PM's

Your too quick :P I was just about to edit my post re: the 7.4v lol

Sure to pm's

S.E.A.L.s

SEALs_Ireland wrote: »

Tokyo Marui MP7 AEP (FPS is between 255 and 265 using 0.20g BB's) in excellent condition, with the original box and all contents from new +

1 x Black Neoprene Carry Case
1 x New Nine Ball Battery Adapter (for external batteries)
1 x Full / Unused Box of Mag Mid-Caps (6 x 100 BB Mags)
1 x Set of Spare Gearbox Parts (most internals + compatible hop unit and gearbox shell + any other suitable parts that turn up)
1 x VFC PEQ Box, with Custom 7.2v 1200mAh NiMH Battery, wired to Deans with a Tamiya adapter included

The asking price is €350 euros

Keegan wrote: »

Barrel is 285mm, I'm happy with a straight swap if you are.

Just to recap my offer is,
G&P Vltor Sentry + original grip
7 mids
ACM 552
CW-CCW adapter

And I also found the rail covers that came with it so I'll throw them in.

Regards,
Keegan.

Keegan wrote: »

Your too quick :P I was just about to edit my post re: the 7.4v lol

Sure to pm's

Trade with Keegan in progress and all going well, should be completed soon

S.E.A.L.s

SEALs_Ireland wrote: »

Trade with Keegan in progress and all going well, should be completed soon

Still in progress and hope to be completed soon

S.E.A.L.s

SEALs_Ireland wrote: »

Trade with Keegan in progress and all going well, should be completed soon

SEALs_Ireland wrote: »

Still in progress and hope to be completed soon

Soon

S.E.A.L.s

S.E.A.L.s wrote: »

Trade with Keegan in progress and all going well, should be completed soon

S.E.A.L.s wrote: »

Still in progress and hope to be completed soon

S.E.A.L.s wrote: »

Soon

Hopefully one day

ordinaryfella

This still for sale?

S.E.A.L.s

ordinaryfella wrote: »

This still for sale?

It's in the process of being traded and are you looking to buy this package please?